set-top box News - Page 3 of 30 - CNX Software

October 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

RedRat-X IR, Bluetooth & RF4CE Box Can Control Multiple TVs and Set-top Boxes

IR blasters can be used to control multiple IR devices through infrared, or other interfaces, for example DVR can use such device to change the channel of a set-top box just before recording. RedRat-X is one of those devices for automating control of TVs, STBs and other infrared equipment, but it’s quite more versatile, as beside its built-in IR blaster, it adds 3 IR outputs were you can connect your own IR transmitters, as well as USB and Ethernet for remote controls. Furthermore, it can also take add-on modules to emulate Bluetooth and RF4CE remote controls. RedRat-X specifications: IR blaster via the front of the unit. 0 mA to 250 mA in 100 steps. 3x plug-in IR jack sockets which can be used in two modes: Current mode (default): For use with plug-in IR flashers – 0mA to 100mA in 100 steps. Voltage mode: To interface to IR distributions systems, […]

September 22, 2017September 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

ARRIS Showcases Android TV Set-Top Boxes at IBC 2017

Just last week, we found out there was a fair amount of TV boxes running Android TV with certification from Google, with most of them from PayTV providers or OEMs. Today, I’ve come to better understand what that means thanks to ARMDevices.net interview of ARRIS at IBC2017. I used to think getting a device with official Android TV support would mean getting Google’s Leanback launcher, but there’s more to it, as Google also offers “operator tier” Android TV certifications, which allow manufacturer to use Android TV operating system with their own launcher/user interface, and official support for Google services like Google Play Store, Google Play Music and so on. ARRIS International has a whole family of certified Android TV devices with 4K UHD set-top boxes and DVR systems as shown in the table below, all likely based on Broadcom SoCs. Wi-Fi Set-Tops Wi-Fi Processor DMIPS Type Size Zx4430 2×2 802.11ac […]

June 10, 2017June 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

TX95D Android Set-Top Box with Amlogic S905D SoC, DVB-T2 Tuner is Selling for $52

We know have a decent choice of affordable Android TV boxes with tuners, but TX95D model powered by Amlogic S905D processor, and a single DVB-T/T2 tuner, appears to be a few dollars cheaper than the competition, as it sells for $51.99 shipped on Acemax’ Aliexpress store. TX95D Android STB specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB flash + micro SD card slot Video Output – HDMI 2.0a up to 4K @ 60Hz with HDR support, and 3.5mm AV (composite video) jack Audio Output – HDMI, AV (stereo audio), optical S/PDIF Video Codecs – 10-bit H.265, and VP9 Profile 2 up to 4K60, H.264 up to 4K30, AVS+ and other codecs up to 1080p60 Tuner – DVB-T/T2 tuner with one coaxial RF input Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi USB […]

June 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

BLOMC ONE is a Linux IPTV/OTT Set-Top Box Compatible with Stalker Middleware Portal

Infomir MAG boxes are popular for people running their own IPTV network with content managed using Linux servers to store media files and run Stalker open source IPTV middleware portal developed by the company. A new company has now launched a competing set-top box compatible with Stalker called BLOMC ONE. BLOMC ONE specifications: Processor – Unamed 667 MHz CPU with LQFP144 package System Memory – 2Gbit (256 MB) DDR3 memory Storage – 16 MB flash Video Output – HDMI 1.3 port up to 1080p, AV (CVBS) Transport Stream & Profile Level – MPEG-4, H.264, H.265, MPEG-2 MP@HL,MPEG/AVC Audio – S/PDIF output, HDMI, and AV Audio Decoding – MPEG1 Layer I&II, MPEG4 AAC, and MPEG4 AAC-HE (AAC+), Dolby Digital(AC-3), MP3, WMA Connectivity – Ethernet (RJ45) port USB – 2x USB 2.0 host ports Misc – RS232 connector, IR expansion port Power Supply – 12V/1.5A; standby Power – 0.5 watts max. Dimensions […]

May 25, 2017May 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

HiSilicon Hi3796M V200 UHD DVB + H.265 STB SoC Showcased at Broadcast Asia 2017

Broadcast Asia international digital multimedia & entertaiment technology exhibition & conference is taking place in Singapore on May 23 – 25, and I’ve been informed that Hisilicon showcased their latest Hi3796M V200 Set-top box SoC with support for 4K DVB, H.265, and high dynamic range technology such as HDR10, HLG and Dolby Vision. Key features and specifications of Hi3796M V200 processor: CPU – Quad core ARM Cortex A53 GPU – ARM Mali-450MP Memory – DDR3, DDR3L, DDR4 Video Output – 1x HDMI 2.0a Tx with HDCP 2.2 Video format – HEVC, H.264, MPEG2, MPEG4, VC1, VP9, AVS 2.0 HDR – HDR10, HLG, Dolby Vision, HDR and SDR conversion HiVXE 2.0 VPU – Decoder – 4K60 10-bit; Encoder – HEVC/H.264 1080p30 or 2x 720p30 Ethernet – 1x Gigabit Ethernet, 1x Fast Ethernet USB 2.0 – 2x USB 2.0 ports SATA & PCIe & USB 3.0 – USB 3.0, SATA 3.0, PCIe […]

May 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Sen5 Amlogic S905D TV Box Review – Part 2: Android Firmware, Kodi 17, and DVB-T2 & S2 App

Sen5 is one of the first Android TV boxes powered by Amlogic S905D processor, and comes with two tuners (DVB-C/T/T2 and DVB-T/T2) with two demodulators that should allow for recording on one tuner, while watching the other, or recording two channels at the same time. We’ve already check out the hardware in the first part of the review, and seen a glimpse of the neat user interface, so today I’ll report about my experience with the device. Sen5 Android Set-Top Box First Boot, Setup Wizard, & First Impressions The STB comes with two USB ports so I used one for the hard drive, a necessity if you plan to use the PVR function, and connected a USB hub to the other with RF dongles for an air mouse and a gamepad, as well as a USB keyboard to take screenshots. I also connected Ethernet and HDMI cables, as well as […]

May 8, 2017May 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 189 Comments

Mecool KI PRO Hybrid Android TV Box with Amlogic S905D SoC, DVB-T2 & DVB-S2 Tuners Sells for $80

VideoStrong has become popular among people wanting an Android TV box with a tuner thanks to their affordable and customizable products such as K1 Plus T2 S2, or KIII Pro coming with DVB-T/T2 and DVB-S/S2 tuners. AFAIK, all there products so far came with a single demodulator meaning you could watch or record satellite or terrestrial TV, but not do both at the same time, for example watching a channel via DVB-S2, and recording one via DVB-T2. Amlogic S905D is supposed to support this, and upcoming products like Sen5 Android set-top box do come with two demodulators. Mecool KI PRO – based on the processor – has just been launched, pre-selling for $79.99 on Banggood with shipping scheduled for mid May. Mecool KI Pro specifications: SoC – Amlogic S905D quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 2 GB DDR4 Storage – 16GB […]

April 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Sen5 Dual Tuner Android Set-top Box Review – Part 1: Unboxing and Teardown

There are only a few companies manufacturing Android TV boxes with tuners with names like VideoStrong and WeTek coming to mind. Shenzhen Sen5 Technology is another one, and the company sent me one of their DVB combo Android TV boxes for review without providing that many details. So let’s have a look at what I received. Sen5 Android Combo STB Unboxing The product might be not ready for retail just yet, as I received it in an old carton box. Once I remove all the bubble wraps, I ended up with the device, an IR remote control, and a 12V/1.5A power supply. Once the product is actually launched I’d expect you’d receive a retail package and a user’s manual too. The box itself is made of plastic with plenty of randomly arranged (ventilation) holes on the top. The front panel comes with an IR window and a “Standby button”, one […]