Single Board Computer News - Page 89 of 99 - CNX Software

August 12, 2018February 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

NanoPC-T4 Review with Android 7.1 Firmware

NanoPC-T4 is one of the many Rockchip RK3399 SBCs now available, and as we’ve seen in the “unboxing review” the company sent me two samples. So far, I’ve been reviewing RK3399 boards with Linux distributions in posts such as “Checking Out Debian and Linux SDK for VideoStrong VS-RD-RK3399 Board” and more recently “AIO-3399J Development Board Review with Ubuntu 16.04“. But in this NanoPC-T4 review, I’ll switch to Android, specifically Android 7.1, as I’ll soon try Android 8.1 on Firefly-RK3399 which might make for an interesting comparison between the two versions of the OS, before switching to Linux with Pine64 RockPro64 board which I received yesterday. First Boot with NanoPC-T4 Development Board I had already assembled the board in the first part of the review, so I just added the two WiFi antennas, the optional USB to serial debug board, and connected various accessories and cables from left to right: USB […]

August 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ClearFog GT 8K is a High-End Networking SBC Powered by Marvell ARMADA A8040 Processor

A few years ago, SolidRun launched ClearFog Pro and Base router boards based on Marvell ARMADA 388 Armv7 (32-bit) processor, and about a year later, the company introduced MACCHIATObin networking board powered by a more powerful Marvell ARMADA 8040 quad core Cortex A72 processor. The company has now given an upgraded to its ClearFog family with ClearFog GT 8K networking board powered on the same ARMADA A8040 processor as on the community board, and offering support for up to 16GB RAM, 6 network interfaces including one 10GbE SFP+ cage , and three mPCIe slots. ClearFog GT 8K specifications: SoC – Marvell ARMADA A8040 quad-core Cortex A72 processor up to 2GHz (commercial), up to 1.6 GHz (industrial) Memory – DIMM slot for up to 16GB DDR4 Storage – Up to 128GB eMMC flash, 64 Mbit SPI flash, micro SD slot, M.2 SSD via optional M.2 mPCIe adapter Connectivity 4x 1GbE switched LAN […]

July 25, 2018July 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

FriendlyELEC NanoPC-T4 Board Kit Unboxing and Assembly

FriendlyELEC introduced NanoPC-T4 RK3399 SBC (Single Board Computer) last May for $129. The board comes with a Rockchip RK3399 hexa-core processor, 4GB RAM, 16GB eMMC flash, dual-band WiFi module and an M.2 socket with NVME (PCIe) SSD support. The company has now sent me the device with accessories for review / evaluation. In this post, I’ll check out all items received, and show how to assemble all components. NanoPC-T4 Board Kit Unboxing Let’s getting started, and open the package… I received two identical kits with two NanoPC-T4 boards, acrylic enclosure with spacers, screws and nuts, 12V/2A power supply, heatsink, and an RC-100 IR remote control. In theory, I also expected two WiFi antennas per kit since that’s part fo the kit in their website, but I did not see any. The remote control is an optional item. [Update: Ooops. I found the antennas inside the package for NanoPC-T4 board.] I’ve […]

July 24, 2018September 9, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Khadas Edge is Both a Standalone Board and a System-on-Module powered by Rockchip RK3399

One of the two most common type of Arm boards are single board computers with everything from processor to memory/storage to ports is placed on a single PCB, and system-on-modules with processor, memory and storage, and sometimes some extra chips with for network connectivity, audio and power management that are supposed to be inserted into a baseboard exposing connectors and headers. The upcoming Khadas Edge board is a little different since it combines both categories into one board with USB receptacles and HDMI output as well as 314-pin MXM3 edge connector to connect to Khadas Captain baseboard, or any other custom compatible baseboard. Khadas Edge will come in three variants (Basic/Pro/Max) with the following specifications: SoC – Rockchip RK3399 hexa core processor with 2x Arm Cortex-A72 up to 1.8GHz, 4x Cortex-A53 up to 1.5GHz, Arm Mali T864 GPU with support for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, VPU with4K VP9 and 4K […]

July 13, 2018July 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Renegade Elite (ROC-RK3399-PC) RK3399 Single Board Computer Launched for $99 on Indiegogo

Libre Computer and Firefly Team previously collaborated on Renegade (ROC-RK3328-CC) board powered by a Rockchip RK3328 quad core Cortex A53 processor and mostly following Raspberry Pi 3 form factor. We already knew both companies worked again on another Rockchip RK3399 single board computer, and were expected to launch it in July via a crowdfunding campaign. The good news is that Libre Computer has just launched Renegade Elite (aka ROC-RK3399-PC) SBC on Indiegogo. Renegade Elite board specifications: SoC – Rockchip RK3399 hexa core processor with 2x Arm Cortex-A72 @ up to 2.0 GHz + 4 Arm Cortex-A53, Arm Mali-T860MP4 with OpenGL ES 1.1 / 1.2 / 2.0 / 3.1 / 3.2 and OpenCL 1.2 support System Memory – 4GB LPDDR4 SDRAM Storage – eMMC 5.x interface for storage modules up to 128GB, micro SD card slot, and 128Mbit SPI NOR flash Video Output / Display I/F HDMI 2.0 connector Embedded DisplayPort (eDP) […]

July 7, 2018 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

GIGABYTE Apollo Lake SBC Upgraded to a Quad Core Processor

GIGABYTE introduced GA-SBCAP3350 Apollo Lake SBC powered by an Intel Celeron N3350 dual core processor las year. The board came without any soldered memory nor storage, instead relying on a SO-DIMM slot, two SATA connectors, and/or an mSATA socket. The company has now launched a second Apollo Lake single board computer – GA-SBCAP3450 – with very similar specifications, except the processor has been upgraded to a Celeron N3450 quad core processor. GIGABYTE GA-SBCAP3450 SBC specifications: SoC – Intel Celeron N3450 quad core processor @ 1.1 GHz/ 2.2 GHz with 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz (6W TDP) System Memory – 1x SO-DIMM socket for up to 8GB DDR3L 1333/1600/1866 MHz Storage – 2x SATA 6Gb/s connectors, 1x MSATA connector (MSATA_MPCIE2), 2x 64Mbit flash for AMI UEFI BIOS supporting PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Video Output 1x HDMI 1.4 […]

July 6, 2018July 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Sapphire FS-FP5V Embedded Board Features AMD Ryzen Embedded V1000 Processor, Four DisplayPort Outputs

We’ve previously covered UDOO Bolt AMD Ryzen Embedded V1000 development board that’s offered for $229 and up on Kickstarter, and targets the maker community. Another board with Ryzen Embedded processor is SAPPHIRE FS-FP5V 5″ board with support for up to four independent displays, and suitable solution for digital signage, POS terminal, electronic gaming machines, medical imaging, thin clients, and so on. Sapphire FS-FP5V specifications: SoC AMD Ryzen Embedded V1202B 2 cores / 4 threads @ 2 GHz / 3.6 GHz (Turbo) with Radeon Vega 3 @ 1100 MHz; 12-25W TDP AMD Ryzen Embedded V1605B 4 cores / 8 threads @ 2.06 GHz / 3.6 GHz (Turbo) with Radeon Vega 8 GPU @ 1100 MHz; 12-25W AMD Ryzen Embedded V1756B 4 cores / 8 threads @ 3.25 GHz / 3.6 GHz with Radeon Vega 8 GPU @ 1100 MHz; 35-54W TDP AMD Ryzen Embedded V1807B 4 cores / 8 threads @ 3.35 […]

June 10, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

IC Nexus SBC3100 Rockchip RK3399 SBC Supports Variable DC Input (9 to 36V)

Earlier this year, we got flooded with announcements for new Rockchip RK3399 SBC’s or development boards with products like RockPro64 or Orange Pi RK3399. Here’s another one launched last year by Taiwan based IC Nexus, which showcased their SBC3100 board at Computex 2018 this past week. IC Nexus SBC3100 SBC specifications: SoC – Rockchip RK3399 hexa core big.LITTLE processor with two Arm Cortex-A72 cores up to 2.0GHz, four Cortex-A53 cores up to 1.5GHz, and a Mali-T864 GPU with OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC System Memory – 1 GB, 2GB or 4GB RAM Storage – 8 or 16GB eMMC flash, 1x microSD slot Display Interfaces / Video Output HDMI 2.0 up to 4K @ 60Hz DisplayPort 1.2 up to 4K @ 60 Hz via USB Type-C connector 1x eDP 1.3 up to 2560 x 1600 @ 60 Hz MIPI-DSI up to 2560 x 1600 @ 60 Hz I2C capacitive […]