Single Board Computer News - Page 53 of 98 - CNX Software

June 30, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Venice GW7100 compact industrial SBC packs one Gigabit Ethernet port, one mPCIe socket

Gateworks introduced the new Venice Industrial IoT SBC Family based on NXP i.MX 8M Mini processor with up to two Ethernet ports and four mPCIe Sockets last September starting with GW7300 board with dual Gigabit Ethernet and three mPCIe sockets. But the US company has now announced the availability of the smallest member of the family with Venice GW7100 SBC equipped with just one Gigabit Ethernet port and one mPCIe socket in a compact 100x35mm form factor. Venice GW7100 specifications: SoC – NXP i.MX 8M Mini single, dual or quad-core Arm Cortex-A53 processor @ up to 1.6GHz, with Arm Cortex-M4 at 400+MHz, 3D GPU (OpenGL ES 2.0), 2D GPU, and 1080p VPU System Memory – 1 GB LPDDR4 (up to 4GB) Storage – 8 GB eMMC flash (up to 64GB) Connectivity 1x Gigabit Ethernet RJ45 port with passive PoE support WiFi/Bluetooth or Cellular connectivity via mini PCIe socket and Nano-SIM […]

June 28, 2021July 5, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Custom Raspberry Pi 3 SBC with eMMC flash powers gateway for washing machines

As I was browsing some group on Facebook, I noticed somebody had bought a custom Broadcom BCM2837 SBC that looks very much like a Raspberry Pi 3 board, and that thing was apparently bought from a Saleng, a three-wheeled motorbike with a side cart where people can buy and sell old/second-hand items. All good fun… So without further ado, here’s what the board looks like… Click for higher resolution photos. Both MIPI CSI and DSI connectors are gone, and so is the AV jack. Two of the USB 2.0 ports have made place for a micro USB port and some headers. Looking at the bottom of the board, the MicroSD card slot is gone, because there’s a 16GB Kingston eMMC flash for storage in that location. At first, I was quite confused, first because the Raspberry Pi logo is nowhere to found, then it’s the first “Raspberry Pi” SBC I […]

June 28, 2021July 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 5.13 Release – Notable changes, Arm, MIPS and RISC-V architectures

Linus Torvalds has just announced the release of Linux 5.13: So we had quite the calm week since rc7, and I see no reason to delay 5.13. The shortlog for the week is tiny, with just 88 non-merge commits (and a few of those are just reverts). It’s a fairly random mix of fixes, and being so small I’d just suggest people scan the appended shortlog for what happened. Of course, if the last week was small and calm, 5.13 overall is actually fairly large. In fact, it’s one of the bigger 5.x releases, with over 16k commits (over 17k if you count merges), from over 2k developers. But it’s a “big all over” kind of thing, not something particular that stands out as particularly unusual. Some of the extra size might just be because 5.12 had that extra rc week. And with 5.13 out the door, that obviously means […]

June 16, 2021June 17, 2021 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

Radxa Zero SBC – A powerful quad-core alternative to Raspberry Pi Zero W

Radxa Zero SBC follows Raspberry Pi Zero W form factor, but thanks to an Amlogic S905Y2 quad-core Cortex-A53 processor clocked at up to 2.0 GHz offers much higher performance, which Radxa says corresponds to about 70% of Raspberry Pi 4 CPU performance. The tiny Arm Linux board comes with up to 4GB RAM, 16GB eMMC flash, and either AP6212 or AP6256 wireless module. plus all interfaces from Raspberry Pi Zero W, but with a twist as the mini HDMI port is replaced by a micro HDMI port, and USB-C ports are used instead of micro USB ports. Radxa Zero preliminary specifications: SoC – Amlogic S905Y2 quad-core Cortex-A53 processor @ up to 2.0 GHz with Arm Mali-G31 MP2 GPU System Memory – 512MB RAM, 1GB, 2GB, or 4GB LPDDR4 Storage – MicroSD slot, optional 8GB or 16GB eMMC flash Video Output – micro HDMI port up to 4Kp60 Connectivity Ampak AP6212 […]

June 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

3.5-inch SBC targets industrial applications with 9-36V wide-range DC-in

BCM Advanced Research ECM-3455J is an upcoming 3.5-inch SBC designed for industrial application with 9-36V wide range DC-in support, an Intel Celeron J3455 quad-core Apollo Lake processor, up to 8GB SO-DIMM memory, and 32GB on-board eMMC flash. The single board computer also comes with HDMI and LVDS video out, dual Gigabit Ethernet, an M.2 socket a micro SIM socket for cellular connectivity, as well as up to eight USB interfaces, and a thick and large heatspreader for fanless operation. ECM-3455J specifications: SoC – Intel Celeron J3455 quad-core Apollo Lake processor @ 1.5GHz / 2.3GHz (Burst Frequency) with Intel HD graphics 500; 10W TDP System Memory – 1x 204-pin SO-DIMM DDR3L-1600MHz socket for up to 8GB RAM Storage – 32GB eMMC flash (option: 64GB), 1x SATA III port, mSATA socket (See expansion), 64Mbit SPI flash for AMI UEFI BIOS Video Output 18/24-bit dual-channel LVDS through Chrontel CH7511B embedded DisplayPort to LVDS […]

June 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

ClearFog CN9130 networking boards deliver 10GbE through a tiny Octeon TX2 module

SolidRun has designed and manufactured ClearFog networking boards ever since the introduction of the Marvell ARMADA 380/388-based ClearFog Pro in 2015. Since then, more powerful models have been launched including the ClearFog GT 8K based on Marvell ARMADA A8040 quad-core Cortex A72 processor with support for 2.5GbE and 10GbE, and the ClearFog CX LX2K equipped with a 16-core Cortex-A72 NXP capable of 100GbE networking. The Israeli company unveiled its first Octeon TX2-based design last fall with ClearFog CX CN9K, a full-featured networking SBC fitted with CEx7 CN9132 COM Express Type 7 module. But now the company has launched the more compact ClearFog CN9130 Pro/Base networking boards equipped with a tiny 50x30mm Octeon TX2 module still enabling 10GbE connectivity. SolidRun SOM 9130 system-on-module Specifications: SoC – Marvell OCTEON TX2 CN9130 quad-core Cortex A72 processor @ up to 2.2 GHz (commercial) or 2.0 GHz (industrial) System Memory – Up to 8GB DDR4 […]

June 4, 2021June 4, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

TQ unveils i.MX 8M Plus LGA module and evaluation single board computer

We’ve seen plenty of systems-on-module based on NXP i.MX 8M Plus AI processor announced at Embedded World 2021 either with edge or board-to-board connectors. TQ TQMa8MPxL is a bit different as an i.MX 8M Plus LGA (Land Grid Array) system-on-module meant to be soldered on a carrier board. The company also took the occasion to unveil STKa8MPxL evaluation kit based on TQMa8MxML in single board computer format to demonstrate its new LGA module. TQMa8MPxL i.MX 8M Plus LGA module Specifications: SoC – NXP i.MX 8M Plus “Quad 8 ML/AI”, “Quad 6 Video”, or “Quad 4 Lite” processor with four Cortex-A53 cores, one Cortex-M7 core, Vivante GPU, video encoder/decoder, HiFi4 audio DSP, and 2.3 TOPS AI accelertor System Memory – Up to 4 GB LPDDR4 Storage – Up to 256 MB (MBytes)Quad SPI NOR flash, up to 256 GB eMMC flash, optional EEPROM up to 64 Kbit 362-pin LGA with Storage […]

May 28, 2021May 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Banana Pi BPI-M2 Pro compact Amlogic S905X3 SBC launched for $61

Banana Pi has already designed an Amlogic S905X3 SBC with Banana Pi BPI-M5 that closely follows Raspberry Pi 3 Model B form factor, but they’ve now launched a more compact model with Banana Pi BPI-M2 Pro that follow the design of the company’ earlier BPI-M2+ SBC powered by the good old Allwinner H3 processor. BPI-M2 Pro comes with 2GB RAM, 16GB eMMC storage, HDMI video output, Gigabit Ethernet, Wifi & Bluetooth connectivity, as well as two USB 3.0 ports. Banana Pi BPI-M2 Pro specifications: SoC – Amlogic S905X3 quad-core Cortex A55 @ up to 2.0 GHz with an Arm Mali-G31 GPU System Memory – 2GB LPDDR4 Storage – 16GB eMMC flash, microSD card slot Video & Audio Output – HDMI 2.1 up to 4Kp60 with HDR, CEC, EDID support Connectivity Gigabit Ethernet Dual-band 802.11 b/g/n/ac WiFi 5 1×1 and Bluetooth 4.2 via Realtek RTL8821CU module USB – 2x USB 3.0 […]