Banana Pi BPI-6202 industrial SBC features Allwinner A40i SoC, 24V DC input, RS485 interfaces

Banana Pi BPI-6202

Banana Pi BPI-6202 “embedded single board computer” features the industrial-grade Allwinner A40i quad-core Cortex-A7 processor with industrial temperature range and long life cycle, 2GB DDR3, 8GB eMMC flash, M.2 SATA slot, and more. That’s the second Allwinner A40i board from Banana Pi since the company launched the Banana Pi BPI-M2 Ultra SBC last year, but the new embedded SBC looks to be better suited for industrial applications with features such as dual Ethernet, an RS485 + RS232 terminal block, 24V DC input, and a -40 to +60°C operating temperature range. Banana Pi BPI-6202 specifications: SoC – Allwinner A40i quad-core Arm Cortex-A7 processor @ 1.20 GHz with Arm Mali-400MP2 GPU, 1080p60 H.264, MPEG-4, MPEG-1/2 video decoder, H.264 1080p45 video encoder System Memory – 2GB DDR3 SDRAM Storage – 8GB eMMC flash, microSD card slot, M.2 Key-B 2242 socket for SATA SSD Video & audio output – HDMI 1.4 port up to […]

Tiny solder-down NXP i.MX 93 System-on-Module powers credit card-sized evaluation board

Raspberry Pi NXP i.MX 93 SBC

Ka-Ro Electronics’ QS93 is a tiny solder-down NXP i.MX 93 System-on-Module (SoM) running Linux and designed for edge processing. The company also offers a credit card-sized evaluation board that may remind some of the Raspberry Pi with its GPIO header and general layout, but it comes with two Fast Ethernet ports and one USB 2.0 port. We’ve already covered several system-on-modules based on the NXP i.MX 93 Cortex-A55/M33 AI processor including some with high-density board-to-board connectors such as the Compulab UCM-IMX93 and Forlinx FET-MX9352-C, others with a SO-DIMM connector like the VAR-SOM-MX93, and finally some designed to be soldered on the carrier board such as the OSM-L compatible iW-RainboW-G50M, and the QS93 adds to the latter category in a tiny 27×27 mm form factor. Ka-Ro electronics QS93 specifications: SoC – NXP i.MX 93 with CPU – Up to dual-core Cortex-A55 processor @ up to 1.5 GHz Real-time core – Arm […]

EPIC-ADN9 SBC features up to four 2.5GbE interfaces, two SATA ports

Intel Atom x7425E SBC

AAEON EPIC-ADN9 SBC is powered by an Intel Processor N50/N97, Core i3-N305, or Atom x7425E Alder Lake N-series processor and equipped with up to four 2.5GbE networking ports and two SATA III ports for storage. The board also comes with a SO-DIMM slot taking up to 16GB DDR4 memory, mSATA storage, three display interfaces including HDMI and DisplayPort, and two USB 3.2 Gen 2 ports, and offers expansion capabilities via M.2 and mPCIe sockets as well as headers. AAEON EPIC-ADN9 specifications: Alder Lake-N SoC (one or the other) Intel Core i3-N305 octa-core processor @ 1.8 / 3.8 GHz (Turbo) with 6 MB cache, 32 EU Intel UHD Graphics up to 1.25 GHz; TDP: 15W Intel Atom x7425E quad-core processor @ 1.5 / 3.4 GHz (Turbo) with 6 MB cache, 24 EU Intel UHD Graphics up to 1.00 GHz; TDP: 12W Intel Processor N97 quad-core processor @ 2.0 / 3.6 GHz […]

Rockchip RK3568 SBC takes up to four AHD cameras, two SATA drives

RK3568 analog camera board

Boardcon EM3568-AV CAM SBC is powered by a Rockchip RK3568 SoC and comes with four AHD (analog high-definition) camera connectors and two SATA 3.0 ports to store video data on hard drives. The SBC is also equipped with up to 8GB RAM, up to 128GB eMMC flash, supports MIPI DSI, LVDS, and eDP displays, and features a video composite output, two Gigabit Ethernet ports, WIFi 4 connectivity, an optional 4G LTE module, a few USB ports, and several connectors for expansion. Boardcon EM3568-AV CAM specifications: SoC – Rockchip RK3568 CPU – Quad-core Cortex-A55 processor @ up to 2.0 GHz GPU – Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1 AI accelerator – 1 TOPS NPU (probably rounded up from 0.8 TOPS) VPU – 4Kp60 H.265/H.264/VP9 video decoding, and 1080p60 H.265/H.264 video encoding System Memory – 2GB (up to 8GB) Storage 8GB eMMC flash (up […]

Star64 RISC-V SBC can now boot Apache NuttX real-time operating system

NuttX RISC-V Star64 SBC

Most of the software development efforts on the more powerful RISC-V boards like Pine64 Star64 or StarFive VisionFive 2 have been focusing on Linux, but Lup Yuen Lee tried something different and managed to boot Apache NuttX real-time operating system on the StarFive JH7110-powered Star64 SBC. NuttX may not often make the news, but they are plenty of supported platforms, and we previously played with it on the Sony SPresense board, and reported about NuttX RTOS on ESP32, so it’s good seeing the open-source real-time operating system add support for the RISC-V architecture. [Update: RISC-V support was added many years ago, sometimes around 2016] The main trick to boot NuttX on the Star64 is to make U-boot think the NuttX kernel is the Linux kernel. That means a Linux image such as sdcard.img for the VisionFive 2 board will be used to get OpenSBIU and U-boot bootloaders, and the NuttX […]

ArmSoM-p2 pro is a compact Rockchip RK3308B-S SBC for headless applications

ArmSoM-p2pro SBC

ArmSoM-p2 pro is a compact Rockchip RK3308B-S SBC made by a company called ArmSoM and designed for headless applications with Ethernet, WiFi 5 and Bluetooth 5.0, a USB port, a headphone jack, as well as two GPIO headers for expansion. The board also comes with 512MB RAM, 8GB eMMC flash and a microSD card slot for storage, extra audio interfaces through the GPIO header, and optional PoE support, all that in a compact 60×52.2mm form factor. ArmSoM-p2 pro specifications: SoC – Rockchip RK3308B-S quad-core Arm Cortex-A35 processor @ up to 1.3 GHz with built-in VAD (Voice Activity Detector) System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash, microSD card slot Audio 3.5mm headphone jack Audio Output – 2x Line out and 1xSPDIF out on 40-pin GPIO header Audio Input – 8x MIC and 1xPDM/I2S on 40-pin GPIO header Connectivity 10/100M Ethernet RJ45 port with optional 802.3af PoE […]

Chart confirms higher level of Raspberry Pi restocks

Raspberry Pi Restocks

Earlier this month, we noted that Raspberry Pi supplies were improving mostly from tweets from Eben Upton who provided data about shipped boards since the beginning of the year. But there are also third-party data that confirm this since RPILocator provides statistics for restocks of Raspberry Pi hardware from approved resellers. The chart below shows weekly data of restocks since January 2022 until today, and we can clearly see a jump in restocks in recent weeks, especially for the Raspberry Pi 4, so there’s no need to steal old boards from discarded scooters anymore 😉 The ramp-up really started on week 25 (June 19-25) and peaked on week 28 (July 10-16) possibly to fill back orders, and restocks have been going down in recent weeks but still at a higher level than previously. While the improvement is mostly visible for the Pi 4, the Raspberry Pi 3 and Raspberry Pi […]

Radxa ROCK 5B SBC goes fanless with metal case

Fanless Radxa ROCK 5B metal case

The Radxa ROCK 5B was one of the first Rockchip RK3588 SBCs, and when we reviewed the developer edition of the board in July 2022 it came with an heatsink and 5V fan that was always on. That’s probably fine for testing, but many people will prefer a fanless solution. It turns out a metal case turning the ROCK 5B SBC into a fanless device has been available since the end of last year, but I’ve only come across it today. The black part is made of metal and the front and back plates are made of green plastic. As with all cases, there are always questions about compatibility with accessories, and for metal cases in particular, whether it’s actually used to cool the processor. Since it’s been around for many months, other users have already tested it out including Radxa forum’s user Deadmeat user who confirmed the SSD and […]

EmbeddedTS embedded systems design