sata News - Page 26 of 26 - CNX Software

December 21, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

CubieTruck Metal Case Kit Getting Started Guide and Review

I’ve received CubieTruck Metal Case kit just over a month ago, but just like for Ubuntu on ODROID-XU3 Lite, the board could not get HDMI EDID info from my Panasonic TV, which led to a crash at boot time. CubieTech has now fixed the issue, so I’ve finally been able to complete the review with Cubieez (Cubie Easy) distribution, pre-installed on the board, and based on Debian 7.6. You can get the full hardware specs on my previous post, but the kits is comprised of four parts: CubieTruck development based on Allwinner A20 dual core processor, a rugged metallic enclosure, a 128GB SSD, and a 5,300 mAh battery acting as a UPS. I’ll start by showing how to setup the board, test SATA and Gigabit Ethernet performance, check if the battery acts as expected, try to use the board as a desktop replacement with LibreOffice, Chromium, and so on, and […]

November 12, 2014November 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Suptronics X200 Raspberry Pi Model B+ Expansion Board Adds Wi-Fi, RTC, VGA, optical S/PDIF, USB ports, Servo Support, and More

The Raspberry Pi is a nice little board, but in some cases you may want to add some extra ports. Suptronics released the X100 expansion board for Raspberry Pi Model B last year, and they’ve now come up with a little monster called X200 expansion board for Raspberry Pi Model B+ which adds Wi-Fi, a real-time clock + battery, a VGA port, optical S/PDIF output, 3.5 mm mic and audio jack, servo support (ULN2803), and a few USB ports to the low cost board. Key features of X200 expansion board: Input Voltage – 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi. VGA output – HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC Audio – 3.5mm MIC in jack, 3.5mm stereo audio jack, S/PDIF output, audio I/O connector (Microphone input and stereo audio amplifier 3.3Wx2) Connectivity – […]

July 14, 2014August 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Eweat EW802 Android TV Box (Amlogic S802) Supports External SATA Drives, Features Dual Wi-Fi Antennas

Amlogic S802 does not support SATA natively, so few Android media players based on this quad core SoC comes with SATA hard drive or SSD support. Zoomtak T8 is one of them, but there’s now another options with Eweat EW802, except than having an internal bay for 2.5″ hard drives, it just features an external SATA connector capable of handling both 2.5″ and 3.5″ drives, and comes with better specs including dual Wi-Fi antennas, 2GB RAM, and 16GB flash. Eweat EW802 specifications: SoC – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU (N.B: It could also be S802-H due to Dolby abd DTS hardware decoding claim). System Memory – 2GB DDR3 Storage – 16GB NAND flash + micro SD slot + SATA connector Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi with two external antennas, and Bluetooth 4.0 Video Output – HDMI 1.4a and AV […]

July 8, 2014July 8, 2014 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

HiMedia Q5 Quad Core is an Android TV Box based on HiSilicon Hi3798C SoC with SATA, USB 3.0, 4K Support

HiMedia has been releasing and manufacturing Android TV boxes with SATA interfaces based on Hilison processors including Q5 (single core) and Q5II (dual core) for a couple of years. The company is about to release another one with the same enclosure, based on a new Hilicon Hi3798C quad core SoC, that they’ve aptly named “Q5 Quad Core”. HiMedia Q5 Quad Core specifications: SoC – HiSilicon Hi3798C quad core ARM Cortex A9 @ 1.5GHz + ARM Mali-450MP6 Octa core GPU. System Memory – 2 GB DDR3 Storage – 8GB eMMC Flash, SATA connector, and MMC/SD 2-in1 card reader Connectivity – 10/100/1000M Ethernet, and 802.11 b/g/n/ Wi-Fi with external antenna Video Out – HDMI 1.4 up to 4K30 and composite Audio Output – HDMI, L/R stereo (RCA), and optical & coaxial S/PDIF Video Codecs – MPEG1/2/4 up to 4K30, H.264/AVC up to 4K30, H.265 up to 4K30, VC-1, REALVIDEO 8/9/10 up to […]

June 26, 2014June 26, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Zoomtak T8 Android TV Box Powered by Amlogic S802 Features a 2.5″ SATA Bay, an Aluminum Enclosure

There are now several Android TV boxes powered by Amlogic S802 such as Tronsmart Vega S89, SZTomato/Eny M8, and Minix Neo X8, and Zoomtak T8 hardware specifications are quite similar to these three devices, except it happens to feature an internal 2.5″ SATA bay placed under the board, and the body is made of aluminum. Zoomtak T8 specifications: SoC – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU System Memory – 1GB DDR3 Storage – 8GB NAND flash + SD/MMC/MS card reader + 2.5″ SATA bay Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi with external antenna. Video Output – HDMI 1.4a, composite output, and component output Audio Output – HDMI, stereo RCA, and optical S/PDIF Video Container Formats – DAT, MPEG, MPE, MPG, TS/TP, VOB, ISO, AVI, MP4, MOV, 3GP, FLV, MKV, M2TS, MTS, M4V, WMV, ASF, RM/RMVB, etc… Audio Formats – MP2, MP3, WMA, WAV, […]

June 11, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Linux 3.15 Released

Linus Torvalds announced the release of Linux Kernel 3.15 last Sunday: So I ended up doing an rc8 because I was a bit worried about some last-minute dcache fixes, but it turns out that nobody seemed to even notice those. We did have other issues during the week, though, so it was just as well. The futex fixes and cleanups may stand out, but as usual there’s various other random fixes since rc8 in there too: mainly drivers (drm, networking, sound, usb etc), networking, scheduling and perf tooling. But it’s all been fairly small and quiet, which *may* of course be due to the fact that last week was also the first week of the merge window for 3.16. That might have distracted some developers. I’m not entirely convinced I liked the overlap, but it seemed to work ok, and unless people scream really loudly (“Please don’t _ever_ do that again”) and give good […]

May 20, 2014 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

PQ Labs iStick A350-SSD is a Quad Core HDMI TV Stick with an mSATA Connector and a Battery

Since there are now so many quad core HDMI TV Sticks and TV Boxes, it would be easy to discount PQ Labs iStick A350-SSD as yet another Android TV devices powered by Rockchip RK3188 SoC, were it not for its mSATA connector and included battery. The company has also managed to add 3 USB ports, and a micro USB port, in a form factor only slightly bigger than a standard HDMI TV dongle. iStick A350-SSD specifications: SoC – Rockchip RK3188 quad-core Cortex A9 @ 1.6GHz with Mali-400MP4 GPU System Memory – 2GB DDR3 Storage – 4 GB NAND Flash, mSATA connector, micro SD slot Video & Audio Output – HDMI, audio jack Connectivity – 10/100M Ethernet, dual band Wi-Fi 802.11 b/g/n and Bluetooth 4.0 (AP6330 module) USB – 3x USB Host, 1x micro USB Misc – Recovery switch, power button, active cooling system Battery – 270 mAh (3.7V) Power Supply […]