sata News - Page 25 of 26 - CNX Software

August 3, 2015December 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Cubieboard 5 (aka CubieTruck Plus) Development Board is Powered by Allwinner H8 SoC

Merrii unveiled H7 Hummingbird board based on Allwinner H8 octa core Cortex A7 processor a few days ago, but it turns out they’ve not been the only ones working on a board with that processor, as Cubietech also showcased prototypes of Cubieboard 5, which they also call CubieTruck Plus, around mid July. They’ve only shown pictures of the board, without much more information, but we can derive most specifications from the pictures: SoC – AllWinner H8 octa-core ARM Cortex-A7 processor @ up to 2.0GHz with PowerVR SGX544 GPU @ up to 700MHz System Memory – 2GB RAM (4x H5TQ4G63AFR-PCB DDR3 chips) Storage – FORESEE eMMC or NAND flash + micro SD card slot + SATA port (via GL830 USB 2.0 to SATA bridge) Video Output – HDMI and DisplayPort Audio – HDMI, optical S/PDIF, 3.5mm headphone jack, built-in microphone Connectivity – Gigabit Ethernet (RTL8211E), dual band WiFi 802.11 b/g/n and […]

August 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

HummingBoard Edge SBC Gets an mSATA/M.2 Connector, an eMMC Flash, and More I/Os

SolidRun launched its HummingBoard family last year with a board with a form factor similar to the Raspberry Pi, but instead of using a Broadcom processor, the boards were based on Freescale i.MX6 single, dual or quad core processors. The company has recently introduce a higher end board with Hummingboard Edge that adds an M.2 connector, eMMC flash, 7 to 36V DC power input, more camera interfaces, a DSI interface, and more GPIOs. The following comparison table shows the differences between the new Hummingboard Edge, and the older HummingBoard Pro and Base boards. HummingBoard-Edge HummingBoard-Pro HummingBoard-Base uSOM model i.MX6 based Solo to Quad Core uSOM Memory Up to 4GB DDR3 Storage uSD, eMMC, M.2/mSATA uSD, mSATA uSD Connectivity 1x RJ45*, 4x USB 2.0, mPCIE with SIM card holder 1x RJ-45*, 2x USB 2.0 Hosts, 2x USB 2.0 header, mPCIE half-size 1x RJ-45*, 2x USB 2.0 Hosts Media HDMI-out, LVDS, analog […]

August 1, 2015August 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zoomtak T8 Plus Android 5.1 TV Box with Amlogic S812 SoC Features a 2.5″ SATA Bay

We’ve already seen a few Amlogic S802 with SATA support such as Zoomtak T8 with a SATA bay, or Eweat EW802 with an external SATA connector. Zoomtak has now introduced an updated version T8 Plus with Amlogic S812 that will run Android 5.1 and Kodi 15.0 by the end of August. Zoomtak T8 Plus specifications: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with Mali-450MP6 GPU System Memory – 2 GB DDR3 Storage – 8GB eMMC flash (16GB optional) + SD/MMC card reader + 2.5″ SATA bay Video Output – HDMI supporting 4K30 and 3D, composite output (RCA) Audio Output – HDMI, stereo RCA, and optical S/PDIF Connectivity – 10/100/1000M Ethernet, dual band 802.11 b/g/n Wi-Fi with external antenna, Bluetooth 4.0 (AP6234 module) USB – 3x USB 2.0 host ports Misc – IR receiver, “restore” pinhole, LED display on front panel, and power button. Power Supply – […]

May 14, 2015May 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

FireWRT is an OpenWRT 802.11ac Board Powered by Mediatek MT7621A Processor

There are plenty of low cost 802.11n routers or boards supporting OpenWRT, even starting at $10 or less such as A5-V11 mini router, but if you’re looking for something a bit more powerful with 802.11ac connectivity, options are much more limited, especially if you need something at a lower cost. One option is Xiaomi MiWiFi router based on Mediatek MT7620A with 64MB RAM, and T-Firefly team is now working on FireWRT board based on the more powerful MT7621A processor coupled with 512 MB RAM, and 16 MB SPI flash. FireWRT specifications: Wi-Fi SoC – Mediatek MT7621A dual core MIPS 1004Kc processor @ 880MHz System Memory – 512 MB DDR3 (Beta version: 256 MB) Storage – 16 MB SPI flash memory, 2x SATA 3.0 ports, micro SD card slot Wi-Fi 802.11 b/g/n @ 2.4GHz up to 300Mbps 802.11 a/n/ac @ 5 GHz, up to 867Mbps (AC1200 class router) External High-Gain Antennas […]

April 30, 2015April 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$170 Solidrun Cubox-i 4×4 Freescale i.MX6 Mini PC Boasts 4GB RAM, an eSATA Port

Most ARM based mini PCs come with 1 or 2GB RAM, with few exceptions like Nagrace HPH NT-V6 or Tronsmart Draco AW80 Telos featuring 4GB RAM, but they are mostly optimized for Android, and although they can also run Linux desktop distributions there are often caveats with lack of hardware video decoding for example. Solidrun has now added a new model to its Cubox-I mini PC family with Cubox-I 4×4 powered by Freescale i.MX6 quad core processor coupled with 4GB RAM, and it’s also one of the few mini PCs coming with an eSATA port. SolidRun CuBox-i 4×4 specifications SoC – Freescale i.MX6 Quad 4x Cortex A9 @1GHz-1.2GHz with Vivante GC2000 (OpenGL/ES 2.0) System Memory – 4GB 64-bit DDR3 @ 1066 MHz Storage – microSD card slot, eSATA II (3 Gbps) connector Video Output – HDMI 1.4 with 3D support Audio Output – HDMi, optical S/PDIF Connectivity – Gigabit Ethernet […]

April 16, 2015April 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Popcorn Hour VTEN 4K Linux Media Player Unboxing & Teardown

Cloud Media (aka Syabas) sent me their latest Popcorn Hour VTEN media player. It supports HDMI output up to 4K, H.265 video codec, and features an eSATA connector, as well as optical and coaxial S/PDIF connectors. Today, I’ll show some pictures of the kit, and teardown the box to checkout the hardware, and in a few days, I’ll report on the user interface, video playback, and HDMI audio pass-through capabilities. Popcorm Hour VTEN Unboxing The unexpected device was sent via Fedex in the package shown below. It lists some of the key features such as H.265, DSD (Direct Stream Digital), FLAC, Matroska, UPnP, 3D, and 4K Ultra HD support, as well as the specs, and more features and package content in English, French, Italian, Spanish, German, Dutch, Swedish, and Danish. The box comes with an IR remote control and two AAA batteries, an HDMI cable, a SATA cable, a 5V/3A […]

February 8, 2015February 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Orange Pi Plus Development Board Gets Upgraded to Allwinner H3 Processor

Orange Pi boards were recently launched with a form factor similar to the Raspberry Pi Model B+, and featuring Allwinner A20 and A31s processors. Orange Pi Plus was initially fitted with Allwinner A31s processor, but Shenzhen Xunlong Software has now decided to use the latest Allwinner H3 quad core processor instead for this model, adding better CPU performance, and H.265 video decoding up to 4K @ 30 fps, likely at the cost of a slower Mali- 400MP2 GPU against the PowerVR SGX544MP used in Allwinner A31s. New Orange Pi Plus specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz with ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot, SATA interface (via a USB to SATA chip), unpopulated 8GB eMMC on the back of the board (despite picture, see comments section) Video Output – HDMI, AV port Audio […]

December 22, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Tronsmart Draco AW80 SATA Performance in Android

When Allwinner A80 TV boxes with SATA port were first release, some people hailed SATA performance, especially while seeking during video playback. But at the time, I was skeptical of these claims since Allwinner A80 SoC does not have have a SATA interface, so a USB to SATA bridge must be used, and the performance should be the same as USB hard drives. Unfortunately, I was unable to confirm these doubts, and test SATA performance in my review of Tronsmart Draco AW80 Meta, because at the time, I did not have any spare SATA hard drive or SSD. But since I’ve received CubieTruck Metal Case kit, which include a 120 GB SSD, so I could finally test the device SATA interface. This CHUANG JIU SSD achieves write and read speeds of respectively 8.7 MB/s & 50.5 MB/s for NTFS, and 36.31 MB/s & 179.45 MB/s for EXT-4 using CubieTruck with […]