sata News - Page 18 of 26 - CNX Software

January 31, 2017January 31, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

GIGABYTE EL-30 Apollo Lake Fanless IoT Gateway Powered by Intel Pentium N4200 to Launch in Q2 2017

GIGABYTE will soon introduce their EL-30 “Intel Apollo Lake IoT Gateway Solution” powered by a quad core Intel Pentium N4200 with 32GB storage, dual Gigabit Ethernet ports, dual HDMI ports, WiFi and Bluetooth connectivity, as well as a mini PCIe slot for 3G module or mSATA storage, and an optional Zigbee module. GIGABYTE EL-30 specifications: SoC – Intel Pentium processor N4200 with 4 cores, 4 threads @ 1.10 – 2.50 GHz with 2MB L2 cache, 18EU Intel HD Graphics 505 (6W TDP) System Memory – 2x SO-DIMM slots for DDR3L 1600/1866MHz memory up to 8GB Storage -32GB eMMC flash + 1x SD card slot + optional mSATA module Video Output – 2x HDMI 1.4b ports up to 3840×2160@30 Hz Audio – Via HDMI ports, 3.5mm audio jack (headphone + mic), Realtek ALC255 audio codec Connectivity 2x GbE LAN ports (Realtek RTL8111HS) Pre-installed WiFi + Bluetooth module in half-size mini PCIe […]

January 30, 2017July 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Voyo (V1) VMac Mini Apollo Lake Mini PC Review – Part 2: Windows 10

Voyo VMac Mini, also sometimes referred to just Voyo V1, is an actively cooled mini PC powered by Intel Celeron N3450 or Pentium N4200 Apollo Lake processor. I’ve received samples for both, and already taken pictures of the device and motherboard. So in the second part I’ll review the mini PC checking out system info, running some benchmarks on both, and see how it performs as an entry-level desktop PC. Voyo VMac Mini Setup and System Information Setup is pretty straightforward, as you just need to connect mouse and keyboard, Ethernet, the mini HDMI to HDMI cable, optionally the included USB WiFi dongle, the power supply, and finally press the power button to get to Windows 10 desktop logged in as “admin” user in about 30 seconds. Some Apollo Lake mini PCs support HDMI 2.0 video output, but this requires a DisplayPort to HDMI 2.0 bridge chip, which not included […]

January 27, 2017January 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Add a 2.5″ Hard Drive to Voyo VMac Mini mini PC with a $20 Custom SATA Cable

When I tore down Voyo VMac Mini mini PC, I noticed a 2.5″ mounting mechanism, and some weird 9-pin SATA connector, but since the hard drive would be so close to the components I assumed this specific case was not designed for a drive, but the board would be compatible. However, it’s now possible to purchase a $20 custom SATA cable from “Voyo Official Store” on Aliexpress to do just that.All you have to do is to open the case, connect the cable to the motherboard, and the hard drive, and mounting the hard drive to the mechanism with four screws. I’m not sure whether you should also use some kind of insulation between the drive and motherboard, as it will be really close, but the company does not mention anything about that. Cooling might also be an issue even though there’s a fan in the mini PC. It’s not […]

January 25, 2017January 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Ebox T8 V Octa-Core Android TV Box Review – Part 2: Android Firmware, EBMC, and Benchmarks

EBox T8 V (version 5) is the new EntertainmentBox.com TV box specially geared towards the UK market with its choice of apps and online shop based in the United Kingdom. It’s an upgrade to EBox T8-4 I reviewed last year, replacing Amlogic S905 quad core processor by Amlogic S912 octa-core processor, but keeping most of the same features including the SATA bay and EBox user interface. Since we’ve already checked out the hardware, likely based on Zoomtak U Plus, I’ll focus on the firmware in the second part. It will be a shorter reviewed than usual since I have already tested many Amlogic S912 TV boxes, and I’ll refer to T8-4 review when the user interface is identical, and instead focus on what has changed, and the usual suspects like audio pass-through, 4K video playback, DRM support, WiFi performance, etc… EBox T8 V Setup Wizard, Setup, OTA Firmware Update, and […]

January 24, 2017July 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Beelink SEA TV Box with Realtek RTD1295, HDMI Input and Internal SATA Bay Sells for $105 and Up

I’ve already reviewed two Android TV boxes powered by Realtek RTD1295 processor, namely Zidoo X9S and EWEAT R9 Plus. They are quite interesting devices as beside supporting video & audio playback nicely (minus 4K H.264 @ 30fps), they also serve as a personal NAS thanks to their SATA interface and OpenWrt operating system running alongside Android, as well as a HDMI recorder and streamer thanks to the HDMI input. Zidoo firmware is a little better, but it only comes with external SATA, while EWEAT R9 Plus comes with a neat internal 3.5″ SATA bay inside a metal case. The downside is that it’s quite expensive at $200 shipped. If you’d like a Realtek RTD1295 solution with a SATA bay, but would like something more cost effective, Beelink SEA TV box with might be for you. Beelink SEA specifications: SoC – Realtek RTD1295 quad core ARM Cortex-A53 processor @ 1.4 GHz […]

January 19, 2017February 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Review of Ebox T8 V Amlogic S912 TV Box with SATA Bay – Part 1: Specs, Unboxing and Teardown

Last summer I reviewed Ebox T8-4, an Android TV box based on Amlogic S905 processor sold by entertainmentbox.com and geared towards the UK market. Although it had some of the typical issues with HDMI audio pass-through, I found the box easy to setup, and potentially interesting for UK viewers since popular IPTV apps were pre-installed. It also came with a SATA bay but for some reasons I never managed to have either a 1TV HDD or 128 GB SSD recognized by the system. Nevertheless, the box is now used full time by another person who seems to be quite happy about it, especially since it comes with an air mouse and a gamepad, and good support. The company has now sent me their updated model, Ebox T8 V, with very similar features but instead equipped with Amlogic S912 octa-core processor. Before checking the firmware, I’ll have a look at the […]

January 19, 2017August 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 56 Comments

Orange Pi Zero NAS Expansion Board with SATA, USB, and AV Port Sells for $10 Shipped

Orange Pi Zero is a $7 and up board based on Allwinner H2+ quad core Cortex A7 processor with 256 to 512MB RAM, Ethernet, WiFi, and USB, but no video output except on headers, making it more suitable to headless applications. The company has just launched Orange Pi Zero NAS Expansion port adding SATA, mSATA, two more USB ports, and an AV port allowing you to add a hard drive or SSD, and connect it to a TV with composite input. Orange Pi Zero NAS Expansion Board preliminary specifications: Storage – 1x SATA port, 1x mSATA port both through a JMS578 USB 3.1 to SATA bridge with UAS support each, which should be better than some other USB to SATA solution despite only being connected to a USB 2.0 interface. USB – 2x USB 2.0 ports Video & Audio Output – 3.5mm AV jack with composite video (TBC) and stereo […]

December 24, 2016March 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Eweat R9 Plus TV Box Review Part 2 – Android, OpenWrt, and HDMI Recording

Eweat R9 Plus is a device powered by Realtek RTD1295 SoC combining main functions: Android 6.0 TV box, OpenWrt NAS/router, and HDMI recorder thanks to its HDMI input port. It competes directly with Zidoo X9S which has the same features, except while Zidoo X9S has no internal SATA bay and your 2.5″ hard drive just hang outside the box, Eweat R9 Plus comes with an internal 3.5″ SATA bay that makes it much neater on your furniture… We’ve already seen that in the first part for review “Eweat R9 Plus unboxing and teardown“, and I was impressed by the hardware, but the software is even more important, and that’s what I’m going to check out in the second and final part of this review. First Boot, First Impressions and Setup. I’ve first inserted a 1TB 3.5″ SATA drive in the device, and then I connected an extra USB 3.0 hard […]