router News - Page 23 of 34 - CNX Software

January 5, 2019 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

D-Link DWR-2010 5G NR Enhanced Gateway Targets the Home Market

It’s possible to use 3G/4G WiFi router either with built-in support or an external cellular USB dongle, but most people likely do so as a backup solution since fixed broadband Internet is usually cheaper and faster, obviously depending on your location. But things may be different with 5G connectivity as currently announced 5G modems, such as Qualcomm Snapdragon X50 or Samsung Exynos Modem 5100, promise download speeds of up to 5 to 6 Gbps. D-Link has unveiled 5G NR WiFi 5 gateway for the home market with D-Link DWR-2010 right before CES 2019. The 5G NR enhanced gateway supports download speeds that are over 40 times faster than the average fixed broadband speed of 70 Mbps in the US, so that would be close to 3 Gbps. D-Link DWR-2010 5G NR enhanced gateway key features: 5G connectivity Chipset – Qualcomm SDX55 (Snapdragon X55) Embedded 5GNR NSA module (3GPP Rel.15) Sub-6 […]

December 12, 2018December 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

TP-Link Archer 802.11ax WiFi 6 Routers Sell for $350 and Up

After NETGEAR and ASUS 802.11.ax WiFi routers introduction earlier this year, TP-Link has now launched their own WiFi 6 routers with Archer AX6000 and Archer AX11000 models. The latter will only be available at the end of January 2019, and full details have not been disclosed yet, but Archer AX6000 has already launched (pre-orders only) and specifications, pricing, and other details are known. TP-Link Archer AX6000 specifications: SoC – Broadcom BCM49408 quad core Cortex A53 processor @ up to 1.8 GHz with network packet co-processor WiFi co-processors – 2x Broadcom BCM43684 802.11ax radios System Memory – 1GB RAM Storage – 128MB Flash Networking Wired 8x 1000/100/10Mbps LAN Ports 1x 2500/2000/1000/100Mbps WAN Port WiFi IEEE 802.11ax/ac/n/a 5GHz up to 4804Mbps IEEE 802.11ax/n/b/g 2.4GHz up to 1148 Mbps Wireless Functions – Enable/Disable Wireless Radio, Guest network, DFS, MU-MIMIO, OFDMA Wireless security – 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions 8x High-Performance External Antennas USB […]

November 8, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

The First 802.11ax WiFI 6 Routers are Now Shipping for $350 and Up

802.11ax WiFi, to be known as WiFi 6 for consumer, promises a much higher throughput up to 10 Gbps, and a better ability to manage high density scenario (i.e.). crowded places where may users connect at the same time. ASUS announced several 802.11ax routers at CES 2018, and the entry-level model – ASUS RT-AX88U – with a combined maximum throughput of 6000 Mbps (referred to as AX6000) is now sold on Amazon for $349.99. NETGEAR has also unveiled their own WiFi 6 routers with respectively Nighthawk AX80 (RAX80) and Nighthawk AX120 (RAX120) routers. I’ve already covered ASUS routers in a previous post, and the 12-stream RAX120 will only become available in Q1 2019, so I’ll focus on the spaceship looking 8-stream RAX80 router since it’s available now. RAX80 WiFi 6 router specifications: SoC – Broadcom BCM49408 quad core Cortex-A53 processor @ 1.8GHz with network packet co-processor @ 800 MHz WiFi […]

October 17, 2018October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Qualcomm QCA64x8 and QCA64x1 802.11ay WiFi Chipsets Deliver 10 Gbps Bandwidth

WiFi has evolved in recent years with the introduction of 802.11ad and 802.11ax (now called WiFi 6). THe latter is now official, and in the last year several 802.11ax chipsets and WiFi 6 routers have been announced, but I’ve not heard much about 802.11ad with claims of up to 7Gbps bandwidth at 60 GHz when unveiled in 2016. The latter have been supplanted by 802.11ay, with Qualcomm having just unveiled QCA64x8 and QCA64x1 802.11ay chipsets capable of delivering 10Gbps and operating at a frequency of 60 GHz. According to Wikipedia, 802.11ay is not really a new standard, but just an evolution of 802.11ad adding four times the bandwidth and up to 4 MIMO streams. Qualcomm chipsets will enable 10+ Gps speeds with wire-equivalent latency, while keeping the power consumption low, and bring the ability to play 4K UltraHD videos over WiFi, virtual / augmented reality games, fixed wireless mesh backhaul, […]

September 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Compulab WILD WiFi Router Supports WiFi RTT (802.11mc) Location

When Google released the first Android P preview back in March, one interesting new feature was indoor positioning through 802.11mc WiFi aka. WiFi RTT (Round Trip-Time). That looks promising so I started to look for 802.11mc capable routers, and all I could find were some Intel cards and Marvell chips with WiFi RTT, but not actual products. Since then Android 9 has been formally released, and today I’ve learned that Compulab launched a WiFi RTT capable router that will work with Android 9.0 phones. Meet Compulab WILD. Compulab WILD WiFi RTT router specifications: SoC (from a choice among three) Intel Atom x7-E3950 quad core processor @ 1.6 / 2.0 GHz with 18 EU HD graphics; 12W TDP Intel Atom x5-E3930 dual core processor @ 1.3 / 1.8 GHz with 12 EU HD graphics; 6.5W TDP Intel Celeron J3455 quad core processor @ 1.5 / 2.2 GHz with 12 EU HD […]

August 13, 2018August 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.18 Release – Main Changes, Arm and MIPS Architecture

Linus Torvalds has just announced the release of Linux 4.18: One week late(r) and here we are – 4.18 is out there. It was a very calm week, and arguably I could just have released on schedule last week, but we did have some minor updates. Mostly networking, but some vfs race fixes (mentioned in the rc8 announment as “pending”) and a couple of driver fixes (scsi, networking, i2c). Some other minor random things (arm crypto fix, parisc memory ordering fix). Shortlog appended for the (few) details. Some of these I was almost ready to just delay to until the next merge window, but they were marked for stable anyway, so it would just have caused more backporting. The vfs fixes are for old races that are really hard to hit (which is obviously why they are old and weren’t noticed earlier). Some of them _have_ been seen in real […]

August 3, 2018October 2, 2019 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Wavlink AC600 Waterproof WiFi Repeater & Router Claims up to 2 km Range

WiFi is used indoors in most cases, but if you are a service provider, or own property with a park or beach, you may want to extend your WiFi coverage outdoors. The only problem is that more routers are not designed to be placed outdoors, and it’s not always easy to protect them from raining, humidity or even sunlight. So ideally in those case, you’d want a weatherproof / waterproof WiFi repeater or touter, and one of those is Wavlink AC600 dual band AC repeater / router which I first found on Banggood for $69.99.Wavlink WL-WN570HA1 AC600 router specifications: Connectivity WiFI Dual band 802.11 a/b/g/n/ac WiFi up to ~600 Mbps: 150Mbps @ 2.4 GHz, 433Mbps @ 5 Ghz Encryption mode – WPA-PSK/WPA2-PSK Transmission distance – 2km Max Functions – WDS & WPS (No VPN) “Up to 1000 mW of power and enhanced receiver design” Ethernet – Waterproof 10/100Mbps Ethernet port (RJ45) Misc – 3x LEDs for signal strength indication Power Supply – […]

August 1, 2018August 1, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

OpenWrt 18.06 is the First Release Since OpenWrt and LEDE Projects Merger

LEDE (Linux Embedded Development Environment) was forked from OpenWrt project in 2016 due to disagreements among developers, and this lead to LEDE 17.01.0 “Reboot” release the following year. But eventually, developers must have realized that running two separate and similar projects in parallel was not the best way to go, and OpentWrt and LEDE projects were re-merged right at the beginning of this year. So I’m pleased to announced the developers have now introduced the first release out of the new partnership with OpenWrt 18.06. OpenWrt 18.06 is actually the first major release since LEDE 17.01, as the previous OpenWrt release was version 15.05. It focuses on support for network flow offloading and modernizing Atheros AR71xx target, brings updates to kernel and package, as well as other improvements and fixes. You’ll find the binary packages for your hardware on the rtargets page, and the source code is hosted on Github. […]