router News - Page 21 of 34 - CNX Software

January 14, 2020 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

OpenWrt 19.07 Released with WPA3 Security, a Faster LuCI web interface

OpenWrt is a popular Linux operating system targeting embedded devices, usually routers (but not only), and serves as a complete replacement for the vendor-supplied firmware on supported devices. The developers released OpenWrt 19.07 on January 6, to succeed OpenWrt 18.06 the previous stable release. The new version brings various improvements including WPA3 support, client-side rendering of the LuCI web interface for faster rendering or a lower-load on the router, and introduces the ath79 target for MIPS routers with device tree support. While WPA3 WiFi security is part of OpenWrt 19.07, it is not enabled by default because the necessary packages hostapd-openssl (access point), wpa-supplicant-openssl (station support only) and wpad-openssl (AP + station) take a fair amount of space, and won’t fit on devices with 8MB flash or less. Another reason for not enabling WPA3 is that many existing client devices will never support WPA3, and some client devices that support […]

January 10, 2020January 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Xiaomi Redmi AC2100 Router Sells for $35 and Up

Xiaomi has launched several affordable WiFi routers over the years. Their latest model is called Xiaomi Redmi AC2100 Router and comes with a dual-core, quad-thread MIPS processor, 128MB storage, WiFi 5 with 6 antennas, and four Gigabit Ethernet ports. Xiaomi Redmi AC2100 router specifications: Processor – MediaTek MT7621A dual-core/quad-thread MIPS processor @ 880MHz System Memory – 128MB RAM Storage – 128MB flash Connectivity Wireless 2.4GHz 2×2 Wi-F 802.11n @ 300Mbps 5G 4×4 WiFi 802.11ac @ 1733Mbps 6x external high gain (5dBi) antennas Security – WPA-PSK / WPA2-PSK encryption, wireless access control (black and white list), hidden SSID, intelligent anti-scratch network Ethernet 1x 10/100/1000Mbps WAN (Auto MDI/ MDIX) 3x 10/100/1000Mbps LAN (Auto MDI/ MDIX) Misc – 2x LEDs Indicators (Internet and System), Reset pin hole Power Supply – 12V/2A Dimensions – 259 x 176 x 184mm The router is said to come with MiWiFi firmware based on OpenWrt with “deep customization”, […]

January 6, 2020April 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

GL.iNet Slate OpenWrt Travel Router Supports Tor, Wireguard VPN, and Cloudflare DNS over HTTPS/TLS

A couple of months ago, we wrote about GL.iNet Mudi portable WiFi router with built-in 4G LTE connectivity and supporting features such as the Tor Project, up to 25 VPN providers, and Cloudflare DNS over HTTPS or TLS. Mudi was launched on Kickstarter and should start shipping very soon, but I was informed about another OpenWrt travel router from the company with GL.iNet Slate also supporting many of the same features, but doing away with built-in cellular connectivity and battery. GL.iNet Slate (GL-AR750S-Ext) router specifications: SoC – Qualcomm QCA9563 MIPS 74Kc processor @ 775MHz System Memory – 128MB DDR2 Storage – Dual Flash 16MB NOR + 128MB NAND, MicroSD card slot up to 128GB Networking Ethernet 1x Gigabit Ethernet WAN 2x Gigabit Ethernet LAN WiFi Dual-band 802.11 b/g/n/ac WiFi 5 with transmission rates up to 300Mbps (2.4GHz) + 433Mbps (5GHz) 2x 2dBi external antennas 3G/4G – Optional via cellular USB […]

December 10, 2019December 10, 2019 by Stephen Vicinanza - 12 Comments

FreeMesh WiFi 5 Mesh Network Router Runs OpenWrt

FreeMesh W1326 LTE Router Mesh Network Access FreeMesh has launched an open-source mesh router, the WE1326 LTE FreeMesh Router (included are two nodes) that runs OpenWrt open-source operating system. Open Source and “Hackable” Mesh System FreeMesh enters the mesh market with source code posted on Gitlab, a user-hackable/customizable mesh in other words. FreeMesh uses OpenWrt – the OpenWrt project is a Linux operating system aimed at embedded systems. The focus is on removing the need for a static firmware, where there is only one option for software for the hardware being purchased. The Offerings and Markets The company is targeting the residential market, where most mesh systems are almost double the $150.00 price tag of the FreeMesh. It is reported that there are other ZBT WE826-WD based mesh routers on the market, check out the LinuxGizmos.com article for more information. FreeMesh Specifications FreeMesh Router CPU Dual Core 880MHz MediaTek MT7621AT ROM SPI […]

November 15, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mudi is a Tor & VPN Enabled Portable 4G LTE WiFi Router (Crowdfunding)

GL.inet has made routers for a long time, and its latest product is called Mudi which they promote as a “4G LTE Privacy Router for Road Warriors”. Mudi is battery-powered, and designed to improve security and privacy compared to using only public WiFi access points, and comes with Tor and VPN support – the latter turned on/off with a physical switch – out of the box. Mudi (GL-E750) hardware specifications: SoC – Qualcomm QCA9530 MIPS24Kc processor @ 650 MHz System Memory – 128MB DDR2 Storage – 16MB + 128MB flash + MicroSD card slot up to 128GB Connectivity WiFi 2.4 GHz 802.11b/g/n WiFi 4 up to 300 Mbps 5 GHz 802.11n/ac WiFi 5 up to 433 Mbps Cellular – 4G LTE Cat.6 or Cat.4 module + NanoSIM card slot USB – USB type-C port Display – OLED display Misc – Power button, VPN switch button Power Input – 5V/2A Power […]

November 15, 2019 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

X96 Link 2-in-1 Android TV Box & Router Combines Arm and MIPS Processors

Most TV boxes come with WiFi and/or Ethernet to access the Internet or local network in order to stream videos, but there are a few rare exceptions with TV boxes also acting as router such as Zome ZMT-330A we covered way back in 2014 with two Ethernet ports. Shenzhen Tomato informed me about another TV box router product dubbed Nut Link powered by Amlogic S905W processor and equipped with not two but three Ethernet ports. A quick web search reveals the device is better known as X96 Link and sells for as low as $39 shipped on sites like GearBest or Aliexpress. X96 Link specifications: SoC – Amlogic S905W quad-core Arm Cortex-A53 processor with penta-core Mali-450MP GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash, MicroSD card slot Video & Audio Output – HDMI 2.0a port up to 4K @ 60 Hzm AV port for composite video and […]

November 11, 2019November 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Firewalla Gold Intel-based Ubuntu Router Enables Multi-Gigabit Cyber Security (Crowdfunding)

We covered Firewalla based on NanoPi NEO board in mid-2018. The device is a tiny firewall, parental control, ad-blocker, and VPN appliance for end-users. Since then they’ve launched Firewalla Blue based on NanoPi NEO2 SBC with Gigabit Ethernet and a faster processor, and now the company has just introduced the even more powerful Intel-based Firewalla Gold. Firewalla Gold specifications: Processor – Unnamed intel 64-bit quad-core processor System Memory – 4GB RAM Storage – 32GB flash Connectivity 4x Gigabit Ethernet ports supporting over 3 Gbps in total, and up to 10 VPN connection at up to 120 Mbps aggregated bandwidth. WiFi 6 module (not sure optional or included) Misc – RTC Power Supply – DC barrel jack They may have designed a custom board this time, as I’m not sure which off-the-shelf SBC they may have used in their new product. The device runs Ubuntu Linux so the users will have […]

November 11, 2019November 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

NanoPi R1S Dual Gigabit Ethernet Router Comes with 32-bit or 64-bit Arm Processor

FriendlyELEC launched NanoPi R1 SBC & Gateway earlier this year with Allwinner H3 processor, two Ethernet ports, as well as WiFi and Bluetooth connectivity. The design makes use of both Ethernet on the processor, but that also means on Gigabit Ethernet port had to be combined with a Fast Ethernet processor. The company has now added a USB to Gigabit Ethernet bridge to their latest NanoPi R1S board meaning it’s now a dual Gigabit Ethernet SBC, but with the caveat that the port behind the USB bridge is limited to USB 2.0 speed (480 Mbps), and with overhead the USB Ethernet bandwidth is around 330 Mbps. There are two versions of the board, namely NanoPi R1S-H3 and R1S-H5 with respectively Allwinner H3 32-bit processor, and Allwinner H5 64-bit processor. Apart from the different processors, both boards share the same PCBA and specifications: SoC NanoPi R1S-H3 – Allwinner H3 quad-core Arm […]