rockchip News - Page 22 of 22 - CNX Software

August 29, 2011August 29, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

X10 AirPad: 200 USD Android 2.3 Tablet powered by Rockchip RK2918

X10 has started to sell its own android tablet for 199.99 USD. The X10 AirPad is powered by Rockchip RK2918, a 1.2GHz, Cortex-A8-based processor, 512 MB RAM and 4GB of flash storage, and runs Android 2.3 (gingerbread). It features a seven-inch, 800 x 480 pixel capacitive display, a 2 MP camera and an HMDI output supporting 1080p. Its specifications are similar to Arnova 7 G2 also powered by RK 2918 @ 1 Ghz, the second version of Arnova 7 that runs Android 2.3 and features a 7″ capacitive display and is said to be sold in Hong Kong for around 215 USD. Here are the X10 AirPad 7″ Android Tablet Specifications: CPU: 1.2 Ghz Rockchip 2918 Cortex A8 processor + 600 Mhz DSP Display: 7″ 800×480 resolution TFT LCD screen Touch-screen: Capacitive multi-touch, 5 point touch OS: Android 2.3, with Flash 10.1 Camera: 2 Megapixel camera with video recording and […]

April 18, 2011April 18, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Rockchip RK2918 based Set-Top Box and Laptop

Rockchip RK2919 is apparently being implemented in many tablets such as Arnova 10, but they are also used in STB / media players and Laptops. Rockchip showcased their set-top box reference design at Hong Kong Electronics Fair 2010. Their board features 100MB Ethernet, one USB host port, one HDMI video output and one SD Card connector. The BOM cost is around 50 USD. The reference designs runs Android 2.3 (gingerbread). They also exhibited a laptop based on RK2918 supposedly manufactured by one of their customers running Android 2.3. There are no details specs nor price information available yet. But with an ARM Cortex A8 running at 1.2Ghz it should offer decent performance compared to existing ARM based laptops although I’d rather have Ubuntu preloaded (now optimized by Linaro) than Android on this kind of device. Here’s a video by Charbax (armdevices.net) of this laptop. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software […]

April 15, 2011April 15, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

RK2918 based Arnova 10 Tablet with Capacitive Touchscreen

Arnova, a subsidiary of Archos in Hong Kong, has already released the resistive touchscreen version of Arnova 10 based on Android 2.1 and powered by Rockchip RK2918 in March 2011. In May, they will start to sell the latest version of Arnova 10 with capacitive touchscreen and Android 2.3 (Gingerbread). The price should only be slightly higher then the first Arnova 10 with a retail price of 229 USD / 229 Euro. This device is very similar to Archos 101 except it has a more powerful processor (Rockchip RK2918 vs. OMAP 3) but it does not have kickstand and surprisingly no HDMI output. Watch the hands-on video by Charbax below. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

January 7, 2011March 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Rockchip RK29xx Processors at CES 2011

Rockchip (瑞芯微电子), a Fuzhou (China) based company, showcased its new RK29XX processors at CES 2011. The processors are aimed at smartphones, mid, tablet and internet tv (smart tv) and compete directly with the like of Qualcomm snapdragon or Samsung Hummingbird. Here are the specs for the RK29XX series: 1.2 GHz ARM Cortex A8 core with Neon and 512KB L2 cache High performance 2D and 3D processors supporting OpenGL ES 2.0 and Open VG. The GPU can deliver up to 60 MT/s. 1080p video decoding for H.264, VP8, RV, WMV, AVS, H.263, MPE-4…. 1080p H.264 video encoding Supports DDRIII, DDRII, Mobile DDR memory 24-bit HW ECC for MLC Nand, support e-MMC boot 3 USB ports for device, host, 3G module 2 SD ports for SD card and WiFi Sensor interface for front and rear camera, up to 5M Standard TFT/EPD controller for variable panels 8 channel I2S and SPDIF TS port […]