rockchip News - Page 11 of 22 - CNX Software

March 22, 2016July 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Rockchip RK3229 based MXQ 4K System Info and Antutu Benchmark

Since MXQ-4K TV box is not working well enough, even after a firmware update, I’ve decided not to do a full review. But since this is the first Rockchip RK3229 device I’ve received, I’ll still share some system information (CPU-Z) and Antutu benchmark results. Rorkchip RK3229 is detected as a quad core Cortex A7 processor between 408 MHz and 1.46 GHz with a Mali-400MP GPU. CPU-Z does not know about it, so it only detect RK3066, meaning the manufacturing process (40 nm) is wrongly reported, and RK3229 is manufactured using a 28nm process. The model us MXQ-4K (rk322x) with the board simply called rk30sdk. They’ve also set the framebuffer resolution to 1280×720 probably due to the limited performance of Mali-400MP GPU. Internal storage is shown to be 3.81GB large, but that’s because I modified the firmware, and it’s now 1.44GB with the latest firmware. Rockchip RK3229 does not support Android […]

March 21, 2016August 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

MXQ-4K RK3229 TV Box Firmware Update – March 8, 2016

MXQ-4K is one of the first TV boxes based on Rockchip RK3229 processor, and while it promised a lot with regards to high bitrate 4K H.265, H.264 and VP9 videos, it failed it deliver when I tested some videos from a USB hard drive, and its Antutu score varies from 12,000 to 19,000 depending on the ambient temperature… The company has now released a new firmware, albeit without any changelog. The build number is rk322x-eng 4.4.4 KTU84Q eng.hotack.2016.03.08.102208 test-keys meaning it was build on March 8, 2016. There are about three apps for OTA firmware update in the January firmware, but none of them worked, so I had to update firmware using the “USB OTG” method, meaning all your settings and apps will be wiped out, so if you don’t have a backup, be prepare to re-install everything. So first, you’ll need to download the firmware (MXQ-4K_ota_20160308.zip), and extract it. […]

March 15, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 4.5 Released – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.5 on Sunday: So this is later on a Sunday than my usual schedule, because I just couldn’t make up my mind whether I should do another rc8 or not, and kept just waffling about it. In the end, I obviously decided not to,but it could have gone either way. We did have one nasty regression that got fixed yesterday, and the networking pull early in the week was larger than I would have wished for. But the block layer should be all good now, and David went through all his networking commits an extra time just to make me feel comfy about it, so in the end I didn’t see any point to making the release cycle any longer than usual. And on the whole, everything here is pretty small. The diffstat looks a bit larger for an xfs fix, because that fix has […]

March 8, 2016March 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

How to Resize Partitions and Update Firmware in MXQ-4K TV Box (Rockchip RK3229)

Since I’ve received MXQ-4K Android TV box yesterday, I have started to play with it, and so far I can’t say I’m impressed, as while the device automatically detected the maximum resolution (3840×2160 @ 60 Hz) for my television, I could not play any of my 4K samples smoothly with either the pre-installed Kodi 15.2, Video and Video Player apps, there’s no power off mode (only standby), and the “internal partition” is only 0.96GB large which can quickly become an issue if you plan on installing several apps. Since GeekBuying has released the stock firmware, I decided to try to adapt the method to resize the partitions for GeekBox (RK3368) to MXQ-4K. Rockchip RK3229 Firmware Modding I’ve used a computer running Ubuntu 14.04, and assume you have most tools pre-installed. The first step is to download the firmware (MXQ-4K_ota_ok_20160127.img update.img), and install the tools to extract it :

git clone https://github.com/geekboxzone/utils
cd utils/rockdev
mv MXQ-4K_ota_ok_20160127.img update.img
./unpack.sh

git clone https://github.com/geekboxzone/utils

cd utils/rockdev

mv MXQ-4K_ota_ok_20160127.img update.img

./unpack.sh

The […]

February 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

More Details about Rockchip RK3399 Cortex A72 SoC: 4K H.264/H.265/VP9, USB 3.0, PCIe, and DisplayPort

We already knew Rockchip RK3399 was going to be a powerful processor with two Cortex A72 cores clocked at up to 2.0GHz, and four Cortex A53 cores teamed with a Mali-T860MP4 GPU. The processor was also said to support 4K H.265 video decoding up to 60 fps, HDMI 2.0 video output, and Gigabit Ethernet. But the company is now at Mobile World Congress 2016, and has disclosed more details. Some of the newly introduced features include: Multi-media 4K @ 60fps 10-bit H.265/H.264/VP9 video decoder 1080p video encoding with H.264 or VP8 Display HDMI 2.0 with HDCP 1.4/2.2 DisplayPort 1.2 and eDP 1.3 with PSR (Panel Self Refresh) Dual channel MIPI-DSI Camera – 8MP ISP, dual channel MIPI-CSI2 External Interfaces 2x USB 3.0 ports with type-C support PCIe 2.1, 4 lanes, 5Gbps per lane 8 channels TX/RX audio for playback and record Embedded low power MCU for other applications (power control?) […]

February 19, 2016February 19, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Rockchip RKi6000 Low Power WiFi SoC Showcased with IoT Demo Board

Announced last year, Rockchip RKi6000 SoC promised WiFi connectivity at Bluetooth 4.0 LE power consumption levels, and the company has recently showcased the technology with a demo board controlling four lightbulbs. The chart above shows Rorkchip solution can transmit data at 802.11b speeds (11 Mbps) while still keeping power consumption low at around 10mW, similar to BT LE, and good enough to run on batteries. Peak Tx and Rx power has gone up a little since the first announcement, as the company now claims 66mW @ 11 Mbps instead of just 60mW. While there’s basically zero information about the chip on Rockchip website, you may have noticed a QR code on the product brochure in Charbax video linking to Rockchip IoT Club, which you can join as long as you work for a company with a specific project in mind. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a […]

January 12, 2016March 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Rockchip RK3229 and RK3399 32-bit and 64-bit Processors Support 4K 10-bit H.265 and HDMI 2.0

Rockchip RK3288 was the first SoC from the company that was supposed to support HDMI 2.0 and 4K 10-bit HEVC, but the HDMI implementation was not perfect since it did not support YUV420 colorspace available on cheaper 4K television like mine (LG 42UB820T), and so I’m limited to 4K @ 30 Hz on RK3288, Rorkchip RK3368 fixed that, but the low cost processor does not support 10-bit HEVC. Rockchip is about to launch two new processor that should bring both features to the low end and high end of the market with RK3229 quad core Cortex A7 processor, and RK3399 hexa core Cortex A72/A53 processor. Rockchip RK3229 specifications: CPU- Quad Core ARM Cortex A7 @ 1.5 GHz GPU – ARM Mali-400MP2 Memory I/F – DDR3-1866/LPDDR3-1333 Video Output – HDMI 2.0 with HDCP 1.4/2.2 + CVBS Video Codec – 4K2K 10-bit H.265 @ 60 fps (Up to 200 Mbps), 4K 10-bit […]

December 21, 2015August 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

How to Upgrade Rockchip Firmware in Linux for RK3288, RK3328, RK3368, RK3399, etc..

I’ve been looking for ways to upgrade firmware on Rockchip RK3368 based GeekBox in a computer running Ubuntu 14.04, but while they’ve provided firmware update instructions for Windows, which remains basically the same as upgrading firmware on Rockchip RK3288, there’s no such information for Linux. However, I could remember than Radxa Rock supported upgrade_tool utility, but since the tool linked on Radxa website might be outdated, I instead searched for some RKtools repository on Geekboxzone Github account, and I was lucky enough to find one. Here’s what I did to flash Light Biz OS to GeekBox with my Linux computer: Get the tools, and make sure upgrade_tool is there.

git clone https://github.com/geekboxzone/lollipop_RKTools.git
cd lollipop_RKTools/linux/Linux_Upgrade_Tool
unzip Linux_Upgrade_Tool_v1.23.zip 
cd Linux_Upgrade_Tool_v1.23/
ls -l upgrade_tool 
-rw-rw-r-- 1 jaufranc jaufranc 3013546 Dec 17  2014 upgrade_tool

git clone https://github.com/geekboxzone/lollipop_RKTools.git

cd lollipop_RKTools/linux/Linux_Upgrade_Tool

unzip Linux_Upgrade_Tool_v1.23.zip

cd Linux_Upgrade_Tool_v1.23/

ls -l upgrade_tool

-rw-rw-r-- 1 jaufranc jaufranc 3013546 Dec 17 2014 upgrade_tool

Download and extract the firmware, e.g. Cross_Lollipop_BizOS_V151208.7z:

sudo apt-get install p7zip-full
7z x Cross_Lollipop_BizOS_V151208.7z

1 2	sudo apt-get install p7zip-full 7z x Cross_Lollipop_BizOS_V151208.7z

Now connect a USB cable to the USB OTG port of your device or board. In case of GeekBox that’s the micro USB port. Now as the board is powered on, keep […]