robotics News - Page 4 of 35 - CNX Software

July 30, 2024July 31, 2024 by Debashis Das - 8 Comments

Quectel LG290P is the world’s first quad-band GNSS module (L1, L2, L5, and E6)

Quectel LG290P Multi constellation and multi Band GNSS module

The Quectel LG290P is a quad-band, multi-constellation, high-precision, real-time kinematic (RTK) GNSS module that supports GPS, GLONASS, Galileo, BDS, QZSS, and NavIC constellations. A typical GNSS module like the SparkFun GNSS L1/L5 can receive signals from only one or two frequency bands, but the Quectel module can receive signals from four different frequency bands (L1, L2, L5, and E6) simultaneously and features built-in anti-jamming technology for improved signal reception in challenging environments. All these measures make this chip suitable for high-precision navigation applications like autonomous robots, UAVs, precision agriculture, surveying and mapping, and autonomous driving. Previously we have written about higher precision GPS modules like the SparkFun RTK EVK module, SparkFun RTK Torch module, the Cavli C17QS IoT GNSS module and much more feel free to check those out if you are interested in those topics. Quectel LG290P GNSS module specification Main module- LG290P GNSS Frequency bands and constellations GPS – L1 […]

July 29, 2024July 29, 2024 by Tomisin Olujinmi - 4 Comments

ODrive Micro is a compact, brushless motor controller designed for space-constrained robotics applications (Crowdfunding)

ODrive Micro is a high-performance servo motor drive from ODrive Robotics that comes in an ultra-compact, 32 x 32mm form factor. The controller provides up to 100W continuous power for driving brushless servo motors. The ODrive Micro is the latest in a series of motor controllers from ODrive and builds on the company’s established software and hardware ecosystem. This includes support for CAN Bus, programming libraries, and a web-based graphic user interface for easy and intuitive setup. The Micro features a CAN interface for daisy-chaining other controllers and an onboard 12-bit magnetic encoder for direct mounting without needing an external encoder. It also offers the option to mount hall, quadrature, and SPI external encoders via the J1 header on the board. The ODrive Micro is aimed at robotics applications where space is premium, including hobbyist and professional use. It is similar to the Wukong 2040, ClearCore, and the Serial Bus […]

July 29, 2024July 28, 2024 by Debashis Das - No Comments

Adeept Robot HAT for Raspberry Pi is designed for DIY projects and educational needs

The Adeept Robot HAT V3.0 is a motor and sensor driver HAT that supports Raspberry Pi 5, Pi 4, and Pi 3 models. The board features a bunch of headers that give access to sensor and motor controllers including sixteen servo motor ports, a three-channel line tracking sensor, an ultrasonic sensor, IR receivers, WS2812 RGB LEDs, and more. Additionally, the board features an integrated 8.4V battery charger with a Type-C port for charging. All these features make it easy to build DIY robotics and smart car projects with this HAT. Previously we have written about similar educational robot kits including the Arduino Alvik educational robot, the XGO-Rider self-balancing robot, the Waveshare UGV Rover, SunFounder GalaxyRVR, and much more. Feel free to check that out if you are interested in those topics. Adeept Robot HAT V3.0 specifications HAT Name – Adeept Robot HAT V3.0 Host controller (one or the other) Raspberry Pi […]

July 23, 2024July 23, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

SagireEdge AI 600 SMARC SoM and devkit feature Qualcomm QCS6490 AIoT processor for Edge AI applications

Sagire AI’s SagireEdge AI 600 is a SMARC-compliant system-on-module (SoM) and a development kit based on Qualcomm QCS6490 octa-core Cortex-A78/A55 IoT processor and designed for Edge AI applications. The module comes with 8GB LPDDR5 and 128GB UFS storage, a WiFi 6E and Bluetooth 5.5 wireless module, a CAN Bus controller, and on-module camera and audio input connectors. Its MXM 3.0 edge connector exposes additional camera interfaces, a MIPI DSI display interface, PCIe Gen3 x2, gigabit Ethernet, a few USB interfaces, and a range of low-speed I/Os. SagireEdge AI 600 SoM specifications: SoC – Qualcomm QCS6490 CPU – Octa-core Kryo 670 with 1x Gold Plus core (Cortex-A78) @ 2.7 GHz, 3x Gold cores (Cortex-A78) @ 2.4 GHz, 4x Silver cores (Cortex-A55) @ up to 1.9 GHz GPU – Adreno 643L GPU @ 812 MHz with support for Open GL ES 3.2, Open CL 2.0, Vulkan 1.x, DX FL 12 DSP – […]

July 17, 2024 by Debashis Das - 4 Comments

ASRock IMB-A8000 industrial Ryzen Embedded 8000 mini-ITX motherboard takes up to 96GB DDR5 RAM

ASRockI MB A8000 Mini ITX Industrial Motherboard

ASRock Industrial recently launched the IMB-A8000, an industrial and embedded motherboard in a mini-ITX form factor. As an embedded motherboard, it is powered by AMD Ryzen Embedded 8000 series APU which features 8 cores and 16 threads, built with 4nm technology, and including a 16 TOPS AI accelerator. The motherboard supports up to 96GB of dual-channel DDR5-5600MHz memory and includes one 2.5GbE LAN port and one GbE LAN port. With a wide temperature range of -20ºC to 70ºC this motherboard can be used in applications like manufacturing, robotics, machine vision, and more. Previously we have seen SolidRun introduce the Bedrock R8000 industrial PC built around the Ryzen Embedded 8000 APU family. Other than that we have written about other Ryzen Embedded mini-ITX motherboards/SBCs such as the Flex Logic InferX Hawk combining an AMD Ryzen Embedded R2314 SoC with AI accelerators, the DFI RNO171 with Ryzen Embedded V2000 family, or more […]

July 11, 2024July 12, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

High Torque Robotics Mini π is a bipedal robot powered by an Orange Pi 5 SBC

High Torque Robotics mini Pi bipedal robot

High Torque Robotics’ Mini π is a 54cm high bipedal robot that can walk and dance with two legs and leverages the Orange Pi 5 SBC’s features such as the 6 TOPS AI accelerator in the Rockchip RK3588S processor. The robot offers 12 degrees of freedom (DOF) and can run, jump, and even flip thanks to its twelve join motors that were developed by the company. The Mini π is designed for locomotion algorithm research and education and supports ZMP (zero moment point), MPC (Model Predictive Control), reinforcement learning locomotion control algorithms, and ROS SLAM navigation features. Mini π bipedal robot highlights: SBC – Orange Pi 5 RK3588S single board computer Controller – Custom-design “high-performance underlying controller” using 4x CAN FD communication DOF – 6 DoF per leg, or 12 in total Joint motors 8x HTDM-5047-36-NE with gear ratio: 36, 16Nm peak torque 4x HTDM-4438-32-NW with gear ratio: 32, […]

July 3, 2024July 16, 2024 by Sponsored Post - No Comments

PCBWay’s 10th anniversary event – Win coupon codes worth up to $249 and various prizes (Sponsored)

PCBWay, one of the most popular PCB manufacturers around the world, is now almost 10 years old, and the company has started a promotional event for the PCBWay’s 10th anniversary with discount coupon codes, free boards, modules, tools, or kits, charity sales, and more. To get started, go to the 10th anniversary page, and click Enter to log in with your existing credentials or sign up for a new account with your email address. If you are a new user, you’ll also receive a welcome email with a special $5 coupon offer for 10 pieces of an up to 2 layer board and a $29 special offer for 1-20 pcs assembly following a long-term price reduction to celebrate the company’s 10th anniversary. After a customized welcome message, you’ll get access to a range of coupon codes to get discounts from $5 up to $240 for your next PCB order or even […]

July 2, 2024July 2, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Allwinner T527 digital signage and Smart Display board offers HDMI, eDP, MIPI DSI, and LVDS display interfaces

MYiR Tech’s MYD-LT527-SX is a board designed for digital signage and Smart Display applications based on the MYC-LT527 Allwinner T527 system-on-module from the company and offering a range of display interfaces namely HDMI, eDP, MIPI DSI and dual-channel LVDS. The digital signage board builds upon MYiR Tech’s MYD-LT527 development board with a larger design featuring many of the same ports (dual GbE, USB 3.0, audio jack, HDMI output), and plenty of connectors for expansion including additional USB 2.0 interfaces, speaker and microphone, RS232, RS485, CAN Bus, and more. MYiR Tech’s MYD-LT527-SX specifications: SoM – MYC-LT527 system-on-module with SoC – Allwinner T527 CPU Octa-core Arm Cortex-A55 processor with four cores @ 1.80 GHz and four cores @ 1.42GHz E906 RISC-V core up to 200 MHz DSP – 600MHz HIFI4 Audio DSP GPU – Arm Mali-G57 MC1 GPU System Memory – 2GB LPDDR4 Storage – 16GB eMMC flash, 32Kbit EEPROM 381-pad LGA […]