Reviews - Page 89 of 130 - CNX Software

September 4, 2016September 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Coowell V4 Android TV Box Review – Part 2: Camera, Skype, Google Hangouts and Duo

Coowell V4 Android TV box is based on Rockchip RK3368 octa-core processor with 2GB RAM, and 16GB flash, and also includes a camera. In part 1 of Coowell V4 review, I have already taken photos of the device, and torn down the device to have a closer look at the board, and the camera which is based on a GC2145 2MP image sensor. Today, I’ll mostly test the camera and microphone, including firmware compatibility with Skype, Google Hangouts, and the latest Duo by Google app. Finally, it’s been a while since I’ve tested a RK3368 TV box, so I’ll run CPU-Z and Antutu again. Coowell V4 Hardware Setup and Launcher Coowell V4 hardware setup is pretty usual, and I connect an Ethernet port, and the USB RF dongle for MINIX NEO A2 Lite air mouse, as well as a USB keyboard to take screenshots. However, while normally I’d use my […]

September 3, 2016November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Allo Sparky Audio Kit Combines an ARM Linux Board with Amplifier, Audio DAC, Reclocker and Capacitance Multiplier Boards

Last year I wrote about Allo Sparky SBC Linux and Android development powered by Actions Semi S500 quad core Cortex A9 processor, which mostly differentiates itself from the competition by the many add-on boards for audio, VoIP, and IoT (WiFi+Bluetooth+Zigbee ). While most of development boards are manufactured in China, Allo company is based in India, and all boards are manufactured there, which could be a benefit to Indian readers who want to avoid potential custom issues with other boards. The company has shipped me their complete audio development kit, and I’ll first check out the hardware, before taking time to experiment with the kit in a few weeks or months… I could find 6 different boards in the kit, which I detailed below, as well as a 5V/3A power supply with AU and EU adapter, a micro USB adapter, a micro SD card apparently pre-loaded with Ubuntu 12.04, a […]

September 2, 2016September 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

MINIX NEO Z83-4 Fanless mini PC Review – Part 1: Specs, Unboxing and Teardown

MINIX has just launched a new Windows 10 mini PC with MINIX NEO Z83-4 powered by an Intel Atom x5-Z8300 quad core processor, 4GB RAM, 32GB storage, Gigabit Ethernet, 802.11ac WiFi, etc.. The company sent me an early review sample, and today I’ll go through the specs, take pictures of the device and accessories, and tear it down to check out the PCBA, and the thermal design. MINIX NEO Z83-4 Specifications MINIX latest mini PC has slightly higher-0end specifications that most X5-Z8300 computers or sticks: SoC – Intel Atom x5-Z8300 “Cherry Trail” quad core processor @ 1.44 GHz / 1.84 GHz (Turbo) with Intel Gen8 HD graphics (2W SDP) System Memory – 4GB DDR3L Storage – 32 GB eMMC 5.0 flash + micro SD slot Video Output – HDMI 1.4 and mini DP up to 4K @ 30 Hz Audio I/O – HDMI, 3.5mm earphone jack Connectivity – Gigabit Ethernet, […]

August 31, 2016September 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

VR SKY CX-V3 Allwinner H8vr All-in-one Android Virtual Reality Headset Review – Part 1: Specs and Unboxing

I’ve heard about standalone Android virtual reality headset for a while, but so far I had never tried one, except using my phone with a cardboard kit, which was not such a good experience. So when GearBest asked me whether I want to try one of the Allwinner H8vr virtual reality kits, I thought it was a good idea, and today, I received VR SKY CX-V3 model. Today, I’ll just list the specs, check out the device and accessories, and report my first impressions, before posting a review about my experience in a few weeks. VR SKY CX-V3 Virtual Reality Headset Specifications While I would have preferred a 2K or greater display, CX-V3 includes a 1080p display, but that’s probably good enough for a first experience: SoC – Allwinner H8 octa core Cortex A7 processor @ up to 2.0 GHz with PowerVR SGX544 GPU System Memory – 2GB DDR3 Storage […]

August 31, 2016September 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Review of Vernee Apollo Lite Smartphone with Mediatek Helio X20 SoC – Part1: Unboxing, First Boot and Benchmarks

Vernee Apollo Lite is the little brother of Vernee Apollo, both based on Mediatek Helio X20 deca-core Cortex A72/A53 SoC, but with the Lite version having lower hardware specs otherwise, and being one of the few ARM Cortex A72 smartphones selling for less than $200 (at least in China). Tomtop, a Chinese online store, sent me a sample for review, and today, I’ll start by going through the tech specs, then check out the phone design and its accessories, and finally run a few benchmark, before posting a more detailed review in one or two weeks, where I’ll have more experience and feel about the phone. Vernee Apollo Lite Specifications I had posted some specs about the phone when it was first released, but they were incomplete at the time, and Vernee now released the full specs for their Apollo Lite: SoC – Meaitek Helio X20 (MT6797) deca-core processor with […]

August 29, 2016August 29, 2016 by Karl Johnson - 15 Comments

Tanix TX5 Pro TV Box Review – Part 2: Modding and Testing

Karl here with part 2 of Tanix TX5 Pro TV box. In the first part we peaked inside took a look at the specs and quick look at the UI. In part 2, we will get into the nitty gritty. When I first received the box there were several issues: Play Store incompatibility, issue with language reverting to Chinese, and green screen on YouTube. Tanix quickly followed up with an update and resolved these issues. Stuck in my ways So I have to admit that I am pretty stuck in my ways when it comes to the way I use Android. It started long ago with my first stick the MK808 with Rockchip Rk3066. It was basically the phone version of Android on the TV and I really liked it. We have come a long way since then and some changes have occurred in the box market UI, like the […]

August 27, 2016August 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Getting Started with ReSpeaker WiFi IoT Board’s Audio Capabilities, Voice Recognition and Synthesis

ReSpeaker is a development board combining an Atmel AVR MCU, a MediaTek MT7688 WiFi module running OpenWrt, a built-in microphone, an audio jack, and I/O headers to allow for voice control and output for IoT applications. That means you could make your own Amazon Echo like device with the board and add-ons, use it as a voice controlled home automation gateway and more. The board was launched on Kickstarter a few days ago, and already raised $100,000 from about 100 backers, but I’ve received an early sample, so I’ll provide some more information about the firmware, and shows how to use with some Python scripts leveraging Microsoft Bing Speech API. You’ll need a micro USB to USB cable to connect your to computer (Linux, Windows, Mac OS…), and a speaker to connect to the board. Linux (OpenWrt) boots in a few seconds, and once it’s done all RGB LED will […]

August 25, 2016August 25, 2016 by Ray - 8 Comments

KowanTV Click Linux IPTV Box Review

CNXSoft: Ray reviews Amlogic S812 powered Linux based KowanTV Click TV box with allegedly access to over a thousand free IPTV channels. While the hardware is pretty standard, you pay a (hefty) premium to access their IPTV servers, and it reminds me of Jynxbox Live which I reviewed a few years ago. I received one these rare Linux stream boxes. It’s called TVone Entertainment hub, advertised as: KowanTV Click To Play Entertainment Hub European American TV Channels Live Broadcast Video on demand IPTV BOX 1000+ Free Channels, and provided by GeekBuying for this review. KowanTV Click Specifications System Operating System Embedded Media OS( linux ) CPU Amlogic S812( ARM cortex-A9 ) GPU Mali-450 Octo-core RAM 2GB RAM ROM 8GB Flash Memory Communication Wifi Connectivity IEEE 802.11 b/g/n 2.4GHz/5GHz Ethernet 10/100M Bluetooth Yes Media Video Supported Video (up to 4K) – MPEG1/2/4, H.264, H.265,AVC, VC-1 , RM/RMVB , Xvid , DviX3/4/5/6, […]