Reviews

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on V-Bridge Muses DTV Modulator and Video Encoder Review – Part 2: Muses-β Turnkey Solution Demo

V-Bridge Muses DTV Modulator and Video Encoder Review – Part 2: Muses-β Turnkey Solution Demo

V-Bridge Muses-α and Muses-β boards can be used to respectively broadcast video to DTV standard from your PC, and as a turnkey solution taking any HDMI, CVBS, or USB inputs. The VATek SoC used in those  board support various DTV standards including DVB-T, DVB-C, ATSC/QAM, DTMB, ISDB-T/TB up to full HD resolution. I’ve received an early prototype for each, and I’ve already taken pictures and show how to assemble both Muses-α and Muses-β kits in the first part of the review. Today, I’ll show a demo with Muses-β turnkey solution taking HDMI input from an Android TV box (R-Box Pro), encoding and modulating the video to DVB-T, before broadcast it to an Android STB with a DVB-T/T2 tuner (U4 Quad Hybrid). This tool could be useful to test STB featuring ATSC or ISDB-T too, as those two standards are not supported in my country, and I could instead generate signals […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Rikomagic MK22 Review – Part 2: Android Firmware, Video & Audio in Kodi, Benchmarks…

Rikomagic MK22 Review – Part 2: Android Firmware, Video & Audio in Kodi, Benchmarks…

Rikomagic MK22 is one of the many Android TV boxes powered by Amlogic S912 octa-core processor with typical hardware specifications such as 2GB RAM, 16GB flash, Gigabit Ethernet and dual band WiFi. I’ve already taken the box apart to check out the hardware in the first part of the review, so I’ll focus on the firmware, but I’ll keep it short focusing on typical problem areas, as I’ve already reviewed a bunch of other Amlogic S912 TV boxes such as Qintaix Q912 or Beelink GT1. First Boot, Firmware Update, and First Impressions After having connected all usual cables and  accessories include a 1TB USB hard drive, and RF dongles for my air mouse and wireless gamepad, I booted the device, and after around 45 seconds (typically), I got to the main launcher. Since I received the device about a month ago, I decided to go to the UPDATE&BACKUP app to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on Sonoff POW and Sonoff TH16 WiFi Relays Review – Part 1: The Hardware

Sonoff POW and Sonoff TH16 WiFi Relays Review – Part 1: The Hardware

Sonoff TH16 is a WiFi 16A relay that can take external sensors via a 2.5mm jack, while Sonoff Pow is a WiFi relay capable of measuring power consumption. Both have been designed by ITEAD Studio, and feature Espressif ESP8266 WiSoC. The company sent me both items for review, and I’ll start by checking out the hardware a little more closely than what is possible during the product announcement. I received Sonoff TH16 together with Sonoff AM2301 temperature and humidity sensor, which I’ll use to use to control an outdoor water pump and gather temperature and humidity data, as well as two Sonoff POW relays,which I plan to use to measure power consumption in my office, both from the power outlets and my aircon. All three WiFi relays support 3500 Watts, and 85 to 250V input. The packages have three QR codes for eWeLink iOS app, the Android app (coolkit.apk), and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 30 Comments on Anet A8 DIY 3D Printer Could Be a Worthwhile First 3D Printer for $147

Anet A8 DIY 3D Printer Could Be a Worthwhile First 3D Printer for $147

You probably have wished getting started with 3D printer, as I did, but you may have been put off with the high cost associated with 3D printers even the cheaper ones for several hundred dollars, especially if you are unsure whether you’re going to use it often. But there’s now a very affordable 3D printer kit based on Prusa i3 printer that sells on GearBest for $146.99 including shipping with A8PRINT coupon. Anet A8 3D printer specifications: Print Area: 220 x 220 x 240mm Print speed – 100 mm/s Nozzle diameter – 0.4 mm Layer thickness – 0.1 – 0.3 mm XY-axis positioning accuracy – 0.012 mm Z-axis positioning accuracy – 0.004 mm Supported materials – ABS, PLA, TPU, Luminescent, Nylon PVA, PP, Wood??? Material diameter – 1.75mm Frame material – Acrylic plate Platform board: Aluminum Base 2004 LCD screen for configuration SD card for offline print Supported file formats – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on ONENUTS Nut 1 TV Box Specifications, Unbagging and Teardown

ONENUTS Nut 1 TV Box Specifications, Unbagging and Teardown

I first discovered Shenzhen Tomato’s ONENUTS brand through ONENUTS T1 3-in-1 projector, tablet, and mini PC, but the company has now launched a new product with ONENUTS Nut 1 Android TV box powered by Amlogic S912 processor, and the usual 2GB RAM and 16GB storage, but the product stands out a little thanks to its presentation as we’ll see below. ONENUTS Nut 1 Specifications The technical specifications are pretty much standard: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot up to 32GB Video Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and AV port (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Connectivity – Gigabit Ethernet, dual band WiFi 802.11 b/g/n/ac, Bluetooth 4.0 USB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Getting Started with RabbitMax Flex IoT and Automation Hat for Raspberry Pi

Getting Started with RabbitMax Flex IoT and Automation Hat for Raspberry Pi

At the beginning of the month I showed how to assemble RabbitMax Flex, a Raspberry Pi HAT compliant add-on board for Raspberry Pi boards with 40-pin header, that targets IoT and home automation project with its relay, IR transmitter and receiver, I2C headers for sensors, buzzer, RGB LED, and more.  Since I’ve already described the hardware, I’ve spend some time this week-end following the user’s guide to play around with the board using a Raspberry Pi 2 board, and try various features. The user’s manual explains that you need the latest version of Raspbian, but I’d not played with my Raspberry Pi 2 board for a while, so the kernel and firmware were quite old:

So the first thing I had to do was to upgrade Raspbian. There are basically two options to upgrade, either downloading and dumping the latest Raspbian firmware image to your micro SD card, and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Pine64 PADI IoT Stamp WiFi IoT Kit Review – Part 1: Hardware, Debuggers, and Soldering

Pine64 PADI IoT Stamp WiFi IoT Kit Review – Part 1: Hardware, Debuggers, and Soldering

Back in September, Pine64 unveiled their $2 PADI IoT Stamp based on Realtek RTL8710 ARM Cortex M3 WiFi SoC aiming to compete with Expressif ESP8266 solutions.  The company has now sent me their complete kit for review, which beside the module itself includes a breakout board kit, and some hardware debug tools. In the first part of the review, I’ll check out the hardware, and solder the kit. I received a package with four antistatic bags. From top left to bottom right, we have PADI IoT Stamp, JLINK-OB debugger based on an STM32 MCU with some jumper wires (aka Dupont cables) for SWD signals, and a USB cable to your computer in order to flash the firmware or do some bare metal programming, a breakout board kit including two headers, a RED LED, and a resistor, and finally a USB to Serial board based on CH340G with 4 jumper wires […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Jumper Ezbook 2 Cherry Trail Laptop with 14″ Full HD Display, 4GB RAM, 64 GB Storage Sells for $190 (Promo)

Jumper Ezbook 2 Cherry Trail Laptop with 14″ Full HD Display, 4GB RAM, 64 GB Storage Sells for $190 (Promo)

I’ve just received a newsletter from GearBest entitled “Shop Like a BOSS | Sub-$200 Ultrabooks, Gaming Gear + More” and showing “Jumper Ezbook 2 Ultrabook” laptop powered by an Intel Atom X5-Z8300 quad core processor with 4GB RAM, 64GB storage, and a 14″ 1920×1080 display selling for $189.89 if you click on a customized link (working once) in the newsletter. If you are not subscribed to the newsletter you can still get it for about $195 including shipping on GearBest or GeekBuying, which still seems like a decent deal for the features. Jumper Ezbook 2 specifications: SoC – Intel Atom x5-Z8300 quad core Cherry Trail processor @ 1.44 GHz with Intel HD graphics (2W SDP) System memory – 4GB DDR3L Storage – 64 GB eMMC flash + micro SD card slot up to 128 GB Display – 14″ LED display with 1920×1080 resolution QWERTY keyboard with touchpad Video Output – […]

Exit mobile version
UP 7000 x86 SBC