Reviews - Page 115 of 124 - CNX Software

May 22, 2014May 22, 2014 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Unboxing of HD18T Android Media Player with DVB-T2 Tuner

Shenzhen Tomato has sent me a sample of HD18T, an Android TV box powered by Amlogic AML8726-MX dual core processor that features a DVB-T2 tuner with In and Out antenna connectors. This is quite timely as Digital TV in Thailand has just started on April 1st of this year. Today, I’ll go through the specs, unbox the device, and show some pictures of the box, the board and DVB-T2 tuner. HD18T Specifications The device enclosure and specifications are very similar to EM6-S2 DVB-S2 Android TV box I covered previously, expect the DVB-S2 tuner is replaced by a DVB-T2 tuner: SoC – AMLogic AML8726-MX dual cortex A9 @ 1.5 GHz + Mali-400MP2 GPU System Memory – 1GB DDR3 RAM Storage – 8GB NAND FLASH + SD card reader Video & Audio Output – HDMI 1.4, AV Audio Output – HDMI, AV, and optical S/PDIF. Dolby TrueHD and DTS HD pass-through. USB […]

May 5, 2014May 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

A Quick Test Drive of Tails, a Privacy Focused Linux Distribution

Tails (The Amnesic Incognito Live System) is a Linux distribution that allows you to use the Internet anonymously and circumvent censorship via the Tor network. It leaves no trace, and is said to use “state-of-the-art” cryptographic tools to encrypt files, emails and instant messages. It’s distributed as a live image that boots from a DVD drive, a USB stick, or an SD card. Tails v1.0 has recently been released. so let’s give it a quick try. Tails is currently only available for x86 (32-bit), no ARM image yet. The source code is available via a git repo. Let’s download the ISO image (mirror), and signature. Alternatively you can download both via BitTorrent. To make sure the image is not compromised it’s recommend to verify the integrity of the ISO image with the signature we’ve just downloaded. You’ll also need a signing key The are several methods, but I’ve opened a terminal, […]

April 17, 2014August 17, 2014 by Jean-Luc Aufranc (CNXSoft) - 242 Comments

Review of M8 Android Kitkat TV Box Powered by Amlogic S802 SoC

A few days ago, I wrote an Unboxing and Specs post about the M8, an Android TV Box powered by Amlogic S802 quad core Cortex A9 processor. The review took a little as I was waiting for a new firmware. I’ve now upgraded this S802 Box, and been able to complete a review. As usual , I’ll start by giving my first impressions, have a look at the user interface and settings, test different king of video files, evaluate Wi-Fi performance, and try to cover most hardware features including Bluetooth, external storage, USB webcam, and so on. The overall user’s experience, is very similar to Tronsmart Vega S89, but there are some notable differences I’ll go through during the review. First Boot, Settings and First Impressions Shenzhen Tomato sent me a sample unit which they call TM8 (Tomato M8?), but I’ll just refer to the device as M8 in the […]

April 16, 2014November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Atmel SAMA5D3 Xplained Board Unboxing and Quick Start Guide

Atmel SAMA5D3 Xplained is an evaluation board running Linux powered by SAMA5D36 ARM Cortex A5 micro-processor with 256 MB DDR2, 256 MB flash, two Ethernet ports, 3 USB connectors, and more. This embedded board targets industrial automation, networks, robotics, control panels and wearable applications. The only video output is an LCD connector so it is reserved for headless or flat panel based applications. You can check full specs on my Atmel SAMA5D3 Xplained announcement post. The company kindly sent me a sample, so that I can share my experience with the board. I’ll first post some unboxing pictures, show how to get started with the pre-installed image, and build my own Linux image. The board can be purchased for $79 from Atmel e-Store, as well as several distributors (P/N: ATSAMA5D3-XPLD). Atmel SAMA5D3 Xplained Unboxing I’ve been sent the board via DHL in the following package, which gives a short desscription […]

April 12, 2014December 18, 2023 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Review of Tronsmart Vega S89 Elite Amlogic S802 TV Box

Tronsmart Vega S89 is an Android TV Box based on Amlogic quad-core Cortex A9 processor. You can refer to Tronsmart Vega S89 specs for more technical details, and check out my Tronsmart Vega S89 Unboxing post for pictures of the device and the board. As a reminder, there are two models of the device: Tronsmart Vega S89 with 16GB flash and dual-band Wi-Fi (AP6330 module), and Tronsmart Vega S89 Elite with 8GB flash and 2.4 WiFi (AP6220 module). I’ve been sent the Elite version, but both versions should have similar performance. I’ll start by giving my first impressions, going through the user interface and settings, then I’ll switch to video and audio tests, Wi-Fi performance, and perform some other tests for Bluetooth, gaming, external storage, USB webcam, etc.. trying to cover most of the hardware features available on this device. First Boot, Settings, and First Impressions Vega S89 (Elite) comes […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Tronsmart Vega S89 (Elite) Android 4.4 Media Player Unboxing

Last review, I wrote an unboxing post about M8, an Android TV Box powered by Amlogic S802 quad core Cortex A9r4 processor with a Mali-450MP6 GPU. I’m still waiting for the firmware to test this device. In the meantime, Geekbuying sent me Tronsmart Vega S89 (Click for full specs), another Android Kitkat TV box powered by S802. There are actually two versions: Tronsmart Vega S89 (16 GB Flash, dual band Wi-Fi), and Tronsmart Vega S89 Elite (8GB Flash, 2.4 GHz Wi-Fi) which is the model I received. I’ll write an unboxing post today with the device and the board, and test the firmware in the next few days. Tronsmart Vega S89 (Elite) Unboxing Geekbuying sent me the sample via DHL which I received in the package below. There are quite a few accessories included with the board. From left to right: IR remote control (2x AAA batteries not included), HDMI […]

April 4, 2014April 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

M8 Android TV Box Powered by AMLogic S802 (Unboxing)

Shenzhen Tomato Technology has send me a sample of their M8 Android TV Box based on the latest quad core AMLogic S802 processor which is said to run Android 4.4 Kitkat. In this post I’ll go through the specs, and show some pictures of the device, and internals. Later, I’ll write a full review with XBMC 13, which I’ve been told is pre-installed. I’ll also receive Tronsmart Vega S89 next week for unboxing and review. M8 Specifications M8 has more or less the same specs as other S802 Android TV boxes: SoC – AMLogic S802 quad core Cortex A9r4 processor @ 2GHz with Mali‐450MP6 GPU System Memory – 2GB DDR3 Storage – 8GB NAND flash + SD card slot Connectivity – 10/100M Ethernet, dual band Wi‐Fi (2.4GHz/5GHz), Bluetooth Video Output – HDMI 1.4b, AV. HDMI supports 1080p, 4K2K 30fps Audio Output – HDMI, AV, and optical S/PDIF Video Codecs and […]

March 27, 2014March 27, 2014 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Review of Mele X1000 Blu-Ray Android TV Box (Telechips TCC8935)

Mele X1000 is an Android media player based on Telechips TCC8935 dual core Cortex A9 that is said to support Blu-ray video playback. You can refer to Mele X1000 specs for more technical details, as well as my previous Mele X1000 Unboxing post for pictures of the device, as well as the PCB. Today I’ll review Mele X1000, by showing off the user interface, and going through the different settings, test video playback including a Blu-ray ISO, wi-fi performance, and report whether all other features such as Bluetooth, USB mass storage, USB webcam, etc… work as expected. First Boot, Settings and First Impressions This media player comes with an infrared remote and corresponding AAA batteries, but during most the tests I’ve actually switched to Mele F10 RF remote (not included) as it’s just more convenient to navigate menus, and I’ve also test an Android Remote app compatible with the device, […]