Reviews - Page 115 of 127 - CNX Software

September 21, 2014January 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Getting Started with LinkIt ONE Development Kit for Wearables & IoT

After going through WRTnode Quick Start Guide, it’s now time to play with LinkIt ONE, the IoT development board from Mediatek designed by Seeed Studio. LinkIt ONE is the first Hardware Development Kit (HDK) for Mediatek LinkIt, so there may be a LinkIt TWO, and/or other hardware platforms in the future. LinkIt ONE specifications Let’s quickly go through the specifications first: Processor – Mediatek MT2502A (Aster) ARM7 EJ-STM processor @ 260 MHz System Memory – 4 MB Storage – 16MB Flash for firmware + micro SD slot shared with SIM slot for up to 32GB additional storage Connectivity: Wi-Fi – 802.11 b/g/n (MT5931) with external antenna Bluetooth – BR/EDR/BLE(Dual Mode) GPS – Mediatek MT3332 with external antenna GSM/GPRS – 850/900/1800/1900 MHz band, Class 12 GPS with external antenna Audio – 3.5mm headphone jack (including mic support) – Support for MP3, AAC, and AMR codecs. Serial – Software Serial (Serial), and […]

September 20, 2014February 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Unboxing of Eny EM6Q-MXQ Android TV Box Powered by Amlogic S805 Processor

EM6Q-MXQ is an Android TV box based on Amlogic S805 quad core Cortex A5 processor, with a quad core Mali-450MP GPU, 1GB RAM, and 8GB flash. The company sent me a sample for review, so today I’ll start with some pictures, and follow up with a full review in a few days. EM6Q-MXQ Unboxing Pictures The box comes with a brand-less “OTT TV BOX” package. The media player comes with an HDMI cable (1.2m), a remote control requiring two AAA batteries, a 5V/2A power supply, and a user’s manual in English and Chinese. The box features an LED and an IR receiver at the front, 3 USB 2.0 ports and an SD card slot on the side, with most ports on the rear panel: another full size USB port (OTG), coaxial S/PDIF, AV output, HDMI output, 10/100M Ethernet, and DC in. There’s also MAC address on the bottom of the […]

September 18, 2014September 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Getting Started with WRTnode OpenWRT Development Board

Seeed Studio sent me two nice little boards that can be used for IoT development: WRTNode and LinkIt ONE. Today, I’ll show pictures of WRTNode and accessories, and go through the “starting guide“, and will test LinkIt ONE board a few days later. WRTnode Unboxing I’ve received WRTnode by Fedex, and the board is stored in a plastic box. Inside the box, you’ll find the board, a “special” USB used to power the board and as an OTG adapter, a piece of paper with useful links (Wiki), and some WRTnode stickers. Any micro USB to USB cable can be used to power the board, but this cable is useless to connect USB devices such as flash drives, webcams (OpenCV is supported), Bluetooth dongles, and so on. You could even connect a USB hub to connect multiple USB devices as shown below. I’ve also taken a picture of both sides of […]

September 13, 2014September 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Tronsmart Orion R28 Meta RK3288 TV Box Unboxing

GeekBuying sent me one of their Tronsmart Orion R28 Meta (Beta) Android TV boxes powered by Rockchip RK3288 SoC. This model comes with 2GB DDR3, 16 eMMC, and 802.11 b/g/n/ac Wi-Fi. R28 Mega is the mid-range model, and there are two others models R28 Pro (entre-level) and R28 Telos (premium). I’ve already listed specifications for the three Tronsmart Orion R28 models. Today, I’ll show some picture of the device, and the board to find out more about the design of the product. Before reviewing the product in another post, I’ll probably build the image using the provided Android 4.4 SDK (provided I can download it), and perform the full review next week with the resulting firmware. Tronsmart Orion Meta R28 Unboxing I’ve received the parcel via DHL within 2 days. The same package will be used for all three models, but you’ll have a sticker on the side for Pro, […]

September 9, 2014December 13, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Review of Kingnovel K-R68 (R6) Android Mini PC

I’ve already listed specs, and shown a few pictures of Kingnovel K-R68 (R6) Android media player based on the latest Rockchip RK3288 quad core processor. I’ve now gone through all my usual tests, so today, I’ll write the review, going through the user interface, testing video playback, reporting one various performance benchmarks including network and storage performance, tested most hardware features, and played a few games. First Boot, Settings and First Impressions Albeit there’s an infrared remote control with the device. I’ve not used it all, especially, as we’ll see below the default user interface is the stock Android home screen. As usual, I’ve connected an RF dongle to use Mele F10 Deluxe air mouse. Before powering up the device, I’ve also connected an HDMI cable, a USB hard drive, and an Ethernet cable. Albeit there’s a power button, the device will boot automatically as you connect the power adapter, […]

September 6, 2014 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Kingnovel K-R68 4K Android STB Unboxing

Kingnovel has sent me a sample of their K-R68 Android media player powered by Rockchip RK3288 quad core processor with 2GB RAM, 8GB flash. Today I’ll start by listing the product specifications, before showing pictures of the device and PCBA. A full review will follow in the next few days. Kingnovel K-R68 specifications The box technical specifications as shown in the product manual are pretty standard: SoC – Rockchip RK3288 quad core ARM Cortex A12/A17 processor @ 2.0 GHz (TBC) with ARM Mali-T764 quad-core 3D GPU with support for OpenGL ES 3.0, OpenCL 1.1, and DirectX11 System Memory – 2GB DDR3 (Optional 4GB DDR3) Storage – 8GB flash (16G/32G optional) + micro SD slot Video Output – HDMI 2.0 up to 4K @ 60fps, 3.5mm AV jack Audio Output – HDMI, AV, and optical S/PDIF Video Codecs – MPEG-1, MPEG-2, MPEG-4, H.264, H.265, RV,.. @ 4K resolution Video Containers – […]

August 27, 2014 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Review of UyeSee G1H Rockchip RK3288 Android TV Box

UyeSee G1H is one of the first Android TV boxes powered by Rockchip RK3288 quad core Cortex A17 SoC. I’ve already listed specs, and shown a few pictures of the device and the board in my “UyeSee G1H Unboxing” post, so today I’ll write a full review, checking out the user interface, testing video playback capabilities, network and storage performance, play a few games, check hardware features are working as expected, and runs some benchmarks on the platform. First Boot, Settings and First Impressions There’s an infrared remote control with the device. I’ve inserted a CR2032 battery, and although it works great in the user interface, it becomes useless with Android apps, so instead I’ve opted to use Mele F10 Deluxe air mouse which brings mouse and keyboard support. Before powering up the device, I’ve connected an HDMI cable, the RF dongle for Mele F10 Deluxe, a USB hard drive, […]

August 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

UyeSee SoundMate M2 Wi-Fi Audio Streamer Review

UyeSee SoundMate M2 Wi-Fi music streaming receiver allows you to wirelessly play audio files from your smartphone or computer to speakers connected to a 3.5mm jack or an audio receiver connected to the optical S/PDIF output of the device. The company sent me a sample for review. I’ll first list the key features of the system, show pictures of the device, and test it with an Android smartphone using my TV speakers. SoundMate M2 Features & Specifications Listed hardware specifications and features: Processor – Unnamed router chipset and Audio DAC Memory & Storage – N/A Connectivity – 802.11 b/g/n WiFi up to 150Mbps with antenna. Open (default), WPA, WPA2, WPA2 Mixed Security. Audio Output – 3.5mm audio jack, optical S/PDIF Streaming Standards – AirPlay, DLNA, and QPlay Audio Formats – aac, mp3, wav, flac, and ape USB – 1x USB 2.0 port for mass storage and/or 3G dongle, 1x micro […]