Raspberry Pi News - Page 164 of 171 - CNX Software

December 19, 2012December 19, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

3.95 Euros RPI-UEXT Breadboard & UEXT Adapter for Raspberry Pi is Now Available

Last month, I wrote about an upcoming T-shaped adapter for the Raspberry Pi that can easily plug into a breadboard, and provides a UEXT connector that can bring new features (RTC, GPRS, sensors, relays…) to the Raspberry Pi via low cost external UEXT modules. Olimex has just announced the RPI-UEXT adapter is now available for 3.95 Euros. To connect RPI-UEXT adapter to the Raspberry Pi, you’ll need to purchase a 26-pin ribbon cable and a breadboard if you don’t have these already. Olimex provides those 2 for respectively 2 & 2.95 Euros. That means a complete set would cost 8.90 Euros. As discussed on my first RPI-UEXT post, what makes this little board really interesting are all the existing UEXT modules (over 20) that bring new features at very low cost. Olimex uploaded a video showing the Raspberry Pi, the RPI-UEXT and the MOD-IO UEXT module connected together, with the Raspberry […]

December 17, 2012December 17, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

libavg on Raspberry Pi

libavg development team has recently announced a beta port of their multimedia library to the Raspberry Pi. libavg is a high-level development platform for media-centric applications using Python as scripting language and written in C++. I came to know this platform as I tried Xibo Digital Signage, and I tested it on ARM platforms. Up to know this would only work using software rendering/decoding, and everything was painfully slow on ARM, but libavg developers are now making use of OpenGL ES to boost graphics speed. More work is needed, and they intend to eventually support features such as hardware video decoding (OpenMAX possibly via gstreamer) and compressed textures. Installing libavg on Raspberry Pi. Pre-built packages are available for Raspberry, so installation is pretty straight forward:

sudo apt-get install libxml2 libpango1.0-0 librsvg2-2 libgdk-pixbuf2.0-0 \
  libavcodec53 libavformat53 libswscale2 libboost-python1.49.0 \
  libboost-thread1.49.0 libsdl1.2debian libxxf86vm1
wget https://www.libavg.de/site/attachments/download/190 -O libavg-raspberry.tar.bz2
sudo tar -C /usr/local -xjf libavg-raspberry.tar.bz2

sudo apt-get install libxml2 libpango1.0-0 librsvg2-2 libgdk-pixbuf2.0-0 \

libavcodec53 libavformat53 libswscale2 libboost-python1.49.0 \

libboost-thread1.49.0 libsdl1.2debian libxxf86vm1

wget https://www.libavg.de/site/attachments/download/190 -O libavg-raspberry.tar.bz2

sudo tar -C /usr/local -xjf libavg-raspberry.tar.bz2

Running Samples Apps 32 samples are located in /usr/local/lib/python2.7/dist-packages/libavg/samples/ directory, and they rely on X11, so first start LXDE:

startx

startx

Open a serial console (LXTerminal) […]

December 15, 2012December 15, 2012 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

SliTaz armhf: 46MB Linux Distribution for Raspberry Pi

SliTaz armhf is a minimal Linux distribution based on SliTaz Linux, that uses the hard-float ABI for the Raspberry Pi. The compressed SD card image is 46M, the rootfs 18.6 MB, and Slitaz uses just about 7 MB RAM after boot. Slitaz armhf rootfs comes pre-loaded with the following packages: busybox 1.20.2 dropbear 2012.55 – Light SSH client and server. nano 2.2.6 – GNU Nano Text Editor. retawq 0.2.6c – Text mode Web browser. tazpkg 5.0 – SliTaz packages manager (Tiny autonomous zone packages manager). ytree 1.97 – file manager for file and archives. Slitaz armhf comes with tazpkg package manager which allows to install packages just like you would do with apt-get in Raspbian. There are over 3,300 packages available for Slitaz (x86), and for now, over 250 packages are available for Slitaz armhf. Let’s get try it out. First, download slitaz-armhf-mini-2012-12-14.zip, extract it, and copy it to an […]

December 9, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Cubieboard Unboxing and Quick Start Guide

I’ve received another cool board this week with the Cubieboard development board. As a quick reminder, the Cubieboard is the only proper low cost AllWinner A10 development board available, and comes with 512MB/1GB RAM, 4GB NAND Flash, 10/100 MBit Ethernet, HDMI output, 2x USB Host port, 1x USB OTG port, a microSD socket, a SATA interface, an IR sensor and 2 headers to access extra pins such as GPIOs, I2C, SPI,VGA pins, CVBS pins etc… CubieTech had a successful Indiegogo campaign where the 1GB board was available for $59 including worldwide shipping (and as low as $19 for early birds), and you can now buy it from resellers. [Update: It’s now available with several cables, USB to TTL debug board, and an enclosure for $80 on dx.com] Cubieboard Unboxing The board comes with a SATA cable and a USB cable for power. There’s no power supply so you’ll need you […]

November 28, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Xibo for Android on Mele A1000 Set-top Box & WM8850-MID Tablet

Earlier this month, Xibo developers announced the beta version Xibo for Android was available for testing. Contrary to the Linux & Windows clients and servers which are open source, Xibo for Android is developed by Spring Signage and will available commercially. This sponsorship will help finance the development of Xibo open source software: the 2 clients (.net in Windows, Python in Linux), the server and API. The current beta version supports the most important features of the Windows client, but lacks support for Adobe Flash, Microsoft PowerPoint, Datasets, Microblog, Stats, Counter Media, Socket Listener, Lift/Serial Interface Support, Offline Update via USB Drive, Full Compositing (overlapping regions) and Video Transparency. If you want to test the Xibo client for android, you can register for the private BETA and download an APK (Xibo_Android_Clientv1.0.12.apk) to install on your Android devices. Being part of the BETA program will also guarantee you a price of […]

November 27, 2012November 27, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Le Labo Citoyen Gasser – Raspberry Pi Based High Precision Pollution Monitoring System

“Le Labo Citoyen” is a recently founded French non-profit organization aimed at “promoting and experimenting with innovating and free technologies for the citizens and the environment”. Their first project is to gather pollution data (NO2, O3, and SO2 levels) in Paris using 2 (soon to be) open source components: Gasser – Self-contained mobile sensor currently powered by the Raspberry Pi ThingStream – Open source IoT datastore which should be similar to iDigi Cloud, except you can just store data in your own server or on “Le Labo Citoyen” servers. Gasser has four main parts: Sensor(s) – Alphasense B4-series sensors (black and red component in the top left of the main box) with accuracy of up to <10 ppb (parts-per-billion). Cost: ~110 Euros. They currently only use the NO2 (nitrogen dioxide) sensor. ADC & Computer – Raspberry Pi (Cost: ~30 Euros) & Delta-Sigma ADC (Cost: ~30 Euros). Communication Medium – Huawei […]

November 22, 2012November 22, 2012 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Olimex to Provide $5 Raspberry Pi GPIO to Breadboard & UEXT Adapter

At $25 and $35 is Raspberry Pi is currently the cheapest board you can buy to develop for ARM Linux, however the expansion boards such as the Gertboard ($60) and the recent PiFace Digital ($32) are not as cheap considering the few components they have on board. This is why Olimex has designed a Raspberry Pi GPIO to breadboard & UEXT adapter (RPI-UEXT) which should be available in 2 weeks for 3.95 Euros (~$5). You then just need to add a breadboard for 2.95 Euros (~$3.8 ), which means for just $9 you can start prototyping easily with the Raspberry Pi. The RPI-UEXT adapter (PCB Layout pictures on the right) also features – as the name implies – a UEXT (Universal EXTension) connector which consists of 10 pins which provide power (+3.3V/GND), and access to asynchronous serial I/O, I2C & SPI signals. This connector allows to connect other UEXT modules […]

November 13, 2012November 14, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

£20 PiFace Digital I/O Expansion Board for the Raspberry Pi Board

Elements14 has just announced that it will be the exclusive distributor of the PiFace Digital I/O expansion board for the Raspberry Pi and sell it for 20 GBP. The PiFace Digital board, whose first prototype was unveiled back in May, is an expansion board allows you to interact with the outside world and control and sense physical devices such as lights, motors and sensors like the Gertboard, but has the advantage of fitting neatly on the top the Raspberry Pi, which should allow it to be used with some of the existing Raspberry Pi cases. Detailed technical information is scarce on the Mk2 version of PiFace Digital (the one sold by Elements14), but the board apprars to include 2 relays (which can be disabled by jumper), a buffered I/O interface with 8 inputs and 8 outputs, and buttons & LEDs. If will primarily be an education platform and free educational tools […]