qualcomm News - Page 19 of 27 - CNX Software

February 22, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Samsung Exynos 8890 Processor with Custom Exynos M1 and ARM Cortex A53 Cores Benchmarked

When Samsung announced Exynos 8890 processor, it promised 10% lower consumption and 30% high performance compared to Exynos 7 Octa. The company also said it make its own custom ARMv8 cores for the new, but at the time details were limited. Anandtech has now published more information, and Exynos 8890 octa-core processor will make use of four Exynos M1 custom cores combined with four low power ARM Cortex A53 cores, combined with a Mali-T880MP12 GPU. Exynos 8890 key features: Low power cores – 4x ARM Cortex A53 cores @ 1.586GHz High performance cores – 2x Exynos M1 @ 2.60 GHz, 2x Exynos N1 @ 2.29 GHz; If 4 cores are running at the same time: 2.29 GHz maximum Memory – 2x 32-bit LPDDR4 @ 1794MHz; 28.7GB/s bandwidth GPU – Mali-T880MP12 @ 650 MHz Manufacturing process – Samsung 14nm LPP Now that Samsung Galaxy 7 has been announced with Exynos 8890 […]

February 12, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Qualcomm Announces Snapdragon Wear 2100 for Smartwatches, 3 New Cortex A53 Mobile SoCs

Qualcomm has unveiled four new Snapdragon processors with three quad and octa core Cortex A53 processors for smartphones with 4G LTE connectivity, and a new wearables SoC with lower power and, area compared to Snapdragon 400 series processor often used in smartwatches. Snapdragon Wear 2100 SoC is the first processor part of Qualcomm Snapdragon Wear, of new platform targeting wearable devices, with the company listing the following highlights: Quad core Cortex A7 processor @ up to 800 MHz or 1.2 GHz Adreno 304 GPU 30% smaller than Snapdragon 400 25% percent lower power than Snapdragon 400 Integrated, ultra-low power sensor hub Available in both tethered (Bluetooth and Wi-Fi) and connected (4G/LTE and 3G via X5 LTE modem) pin-to-pin compatible versions The SoC supports Android Wear, and Android, and should be found in smart watches, smart bands, smart eyewear and smart headsets. Snapdragon Wear 2100 and other Snapdragon Wear products are […]

November 21, 2015May 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

DragonBoard 410c Development Board Quick Start Guide and Android Benchmarks

Linaro’s 96Boards initiative was announced in February with the introduction of Hikey board, and while progress has been rather slow, there are now two boards available for sale: Lemaker Hikey and Qualcomm Dragonboard 410c. The main advantage of these board is that 96Boards is not only an hardware specification, but also a software specifications that mandate most code to be open source, with recent versions of Linux and U-boot, and in the case of Dragonboard 410c work is being done with Freedreno open source GPU drivers. Now that I’ve got a board I’ll explain my experience with the purchasing process, take a few pictures, and show how to get started with Android, and install the latest version, before running a few benchmarks. Ordering DragonBoard 410c Development Board I normally don’t like purchasing from North American and European distributors, because of the potential documentation involved to comply with silly laws, high […]

October 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Qualcomm DragonBoard 410c Board Now Supports Windows 10 IoT Core

Microsoft announced Windows 10 IoT Core for Raspberry Pi 2 and Minnowboard MAX boards a few months, and now the company has added a new ARM board to their Windows 10 IoT program with the soon-to-be-available Qualcomm DragonBoard 410c development board compliant with 96Boards specifications. Windows 10 IoT Core for DragonBoard 410c adds support for onboard WiFi and Bluetooth, as well as DirectX graphics on top of features already supported on the Raspberry Pi 2. To get started, you’ll need a computer running Windows 10, and follow DragonBoard’s Winfows 10 IoT Core guide. I assume most people familiar with Linux operating systems won’t suddenly jump ship to run a Windows operating systems, but Windows developers who got used to work with Visual Studio may be more comfortable with Microsoft’s environment. Out of curiosity, I’ve checked out if anybody had done any project with Windows 10 IoT core, and was surprised […]

September 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Qualcomm Unveils Octa-core Cortex A53 Snapdragon 430 and 617 Processors

Qualcomm has unveiled two new octacore 64-bit ARM processors for mid-range smartphones with Snapdragon 430 and Snapdragon 617 Cortex A53 SoCs, both of which support the recently announced Quick Charge 3.0 standard and embed LTE connectivity. Snapdragon 430 Snapdragon 430 key features and specifications: CPU – 8x ARM Cortex A53 up to 1.2 GHz GPU – Qualcomm Adreno 505 GPU supporting up to OpenGL ES 3.1+ DSP – Qualcomm Hexagon 536 DSP Memory – LPDDR3 800MHz Storage – eMMC 5.1, SD 3.0 (UHS-I) Modem – Snapdragon X6 LTE – LTE Cat 4 (up to 150 Mbps DL/75 Mbps UL) Wireless Connectivity – WiFi 802.11n/ac (Qualcomm VIVE 2-stream with MU-MIMO), Bluetooth 4.1 + BLE, GPS (Qualcomm IZat Gen8C) Display – Up to 1080p on device and output Video – Up to 1080p at 30 FPS; Codecs: H.264 (AVC), H.265 (HEVC) Audio – Fluence HD noise cancellation technology Camera – Up to […]

September 20, 2015September 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm Quick Charge 3.0 Promises to Charge Phones About 3x Faster Than Conventional Devices

Qualcomm has recently announced the latest version of its Quick Charge technology that allows to charge supported smartphones much faster than typical smartphones using a 5V charger. The company claims that Quick Charge 3.0 enabled smartphones can typicallly charge from zero to 80 percent in about 35 minutes compared to almost 90 minutes with conventional devices. Quick Charge 3.0 adds support for Intelligent Negotiation for Optimum Voltage (INOV), a new algorithm developed by Qualcomm Technologies that allows mobile devices to request optimal power transfer (3.6V to 20V in 200mV increments), while maximizing efficiency, which – together with other improvements – increases power efficient by 38% compared to Quick Charge 2.0, and allows charging the device twice as fast as possible with Quick Charge 1.0. That means the voltage and amperage will change during charging between 3.6V to 20V by 200mV increments, instead of 5V, 9V, 12V, and 20V for QC […]

September 12, 2015September 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Inforce 6410Plus Single Board Computer with Snapdragon 600 SoC Sells for $98 (Promo)

Inforce 6410Plus SBC is the successor of Inforce 6410 board, also based on Qualcomm Snapdragon 600 processor (APQ8064), but compared to the first version of the board, it adds GPS/Glonass, some MIPI CSI and DSI interface,and a few others changes. The normal price is $143, but it is currently selling for $98 for a limited period. I’ve reproduced the specifications below as a reminder: SoC – Qualcomm Snapdragon 600 (APQ8064) Quad Core Krait 300 processor @ 1.7GHz + Adreno 320 GPU System Memory – 2GB on-board PCDDR3, up to 533MHz Storage – 4GB eMMC + μSD card connector + SATA interface Connectivity: 802.11 b/g/n WiFi (Atheros QCA6234) Bluetooth 4.0 (Atheros QCA6234) 10/100/1000bps Ethernet (Atheros 8151) GPS/GLONASS Video and Audio Interfaces: μHDMI (1080p) 2x MIPI-CSI2 (4-lane, up to 20MP camera @ 15 fps) Dual MIPI-DSI (4 lane) – Primary : up to QWXGA (2048 × 1536), 60 Hz refresh rate; Secondary: […]

September 3, 2015September 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Qualcomm Snapdragon 820 Promises Twice the Performance & Power Efficiency of Snapdragon 810

Qualcomm has provided more details about Snapdragon 820 processor featuring custom-designed 64-bit ARM Kryo cores, an Adreno 530 GPU and an Hexagan 680 DSP, with claims that it should be twice as fast and consume half the power of Snapdragon 810 processor with Cortex A57 and A53 cores. Based on the chart below, it will also be faster than Snapdragon 620 with Cortex A72 and A53 cores. Snapdragon 820 will feature four Kryo cores (succeeding Krait cores) clocked at up to 2.2 GHz and be manufactured using 14nm FinFET process technology. Adreno 530 GPU is expected to deliver over 40% performance improvement over Adreno 430 GPU while also keeping power consumption 40% lower, a new Spectra camera dual ISP will support 14-bit sensors, and Hexagon 680 DSP adds a separate low power DSP for always-on sensor processing, and support for HVX (Hexagon Vector eXtensions) to be used for advanced imaging […]