poe News - Page 12 of 13 - CNX Software

November 30, 2017August 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MatchBox LoRaWan Gateway Review – Part 1: Unboxing and Teardown

Last spring, I wrote about MatchX.io MatchBox LoRaWAN gateway with GPS, WiFi, and Ethernet connectivity. The gateway is equipped based on a Mediatek WiFi module running Linux (OpenWrt/LEDE), Semtech chips for the LoRa part, and support up to 65,535 nodes, such as the as well as MatchStick, MatchModule, and MatchCore sensors provided by the company. I’ve just received MatchBox gateway for review, but I’m still waiting for 920-925MHz LoRa nodes as they are going through the FCC certification process, and I also have to wait for clarifications regarding local regulations. So in the meantime, I’ll check out the gateway hardware. MatchBox LoRaWAN Gateway Unboxing The gateway is shipped with a power supply, power cord, two antennas, an installation guide,… as well as three screws and pegs to wall mount the gateway and power supply, and in case you want to install the gateway on a pole, as shown below, for […]

October 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Gumstix Expands Raspberry Pi Support with Stepper Motor, Breakout Board, LoRa PoE, and Yocto Linux

Gumstix has recently released of three new expansion boards compatible with Raspberry Pi boards and Compute Modules: Gumstix Pi Stepper HAT for 4-wire stepper motors Gumstix Pi Newgate breakout boards exposing all I/Os of Raspberry Pi Compute Module and Compute Module 3 Gumstix Pi Conduit PoE adding PoE support to their LoRa gateway kit based on RisingHF RHF0M301 LoRa concentrator module. The company also offers a custom Yocto 2.2 (Morty) Linux images with support for their Pi HATs and Compute Module carrier boards. Gumstix Pi Stepper HAT The expansion board is designed with the 40-pin header for Raspberry Pi products, and includes Texas Instruments DRV8846, a 4 – 18V, 1.4A stepper motor driver with 1/32 microstepping providing rotational accuracy below a tenth of a degree, and 6,400 distinct positions. The board supports 6 to 36V batteries via a 3-pin headers, includes 256 kbit serial EEPROM, and can be used for […]

September 8, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Habey EMB-2200 Pico-ITX board is Designed for Industrial IoT Gateways & HMI Panels

Habey USA has sent out an email to announce their EMB-2200 industrial grade Pico-ITX board powered by NXP i.MX6UL processor with up to 512 MB DDR3, WIFi and Bluetooth, optional PoE support, LCD interface, etc…, and designed for IoT gateways, HMI applications, and other embedded applications. Habey EMB-2200 board specifications: SoC- NXP i.MX 6UltraLite single core ARM Cortex-A7 processor at 528/696MHz System Memory – 128, 256 or 512MB RAM Storage – Various options of eMMC, iNAND or SLC NAND flash (Default: 8GB eMMC flash) Display – 1x 24-bit Parallel LCD (RGB) interface up to 1366×768, 4-wire touch interface Audio – 1x 3.5mm Line OUT jack Connectivity – 2x 10/100 Mbps Fast Ethernet ports, WiFi and Bluetooth module USB – 2x USB 2.0 ports I/Os – 5x RS-232 header, 2x CAN Bus, 2x USB2.0, 1x USB OTG Configurable GPIO, SPI, I2C Expansion – 1x full-size mini-PCIe with USB connection for cellular […]

June 22, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Inforce 6309 Snapdragon 410E micro SBC is Now Selling for $89 (Promo)

With its Snapdragon 410E processor, Inforce 6309 single board computer is similar to Qualcomm DragonBoard 410c board, except it adds a Gigabit Ethernet port with optional PoE/RS484 add-on, switches HDMI with micro HDMI, replaces Low and High speed connectors with LVDS, dual MIPI-DSI, and 26-pin IO onnector, as well as offering an extended temperature range. It’s also designed for production, rather than just development, but it normally costs $126 instead of $75 for Qualcomm’s 96Boards compliant board. Inforce is now bringing that price down with a summer promotion allowing you to buy the board for $89 using summer coupon, excluding potential taxes, and shipping. I’ll reproduce the specifications below for reference: SoC- Qualcomm Snapdragon 410/410E (APQ8016/APQ8016E) quad-core ARM CortexA53 @ 1.2 GHz with Adreno 306 GPU and Hexagon QDSP6 @ 700 MHz System Memory – 1GB LPDDR3 @ 533MHz, single-channel 32-bit (4.2GBps) Storage – 8GB eMMC flash (eMCP package with […]

April 28, 2017April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Shuttle NS02E Rockchip RK3368 Android mini PC Supports PoE for Digital Signage and Thin Clients

The market is flooded of octa-core Android mini PCs or TV boxes for the consumer market, but Rockchip RK3368 powered Shuttle NS02E Android mini PC targets a different mark, specifically digital signage and thin clients as it’s been designed for 24/7 nonstop operation, and supports features such as PoE (Power over Ethernet). Shuttle XPC nano NS02E specifications: SoC – Rockchip RK3368 ARM Cortex A53 processor @ up to 1.5 GHz with Imagination PowerVR G6110 “Rogue” GPU System Memory – 2GB RAM Storage – 16GB eMMC flash, 2.5″ SATA bay for 7″ drives (requires one extra optional accessory), SD card reader Video Output – HDMI 2.0 Audio Output – Via HDMI, 3.5mm Line OUT audio jack Connectivity – Gigabit Ethernet (RTL8211-CG transceiver) with PoE support, 802.11 b/g/n WiFi and Bluetooth 4.0 (RTL8723BS module) USB – 3x USB 2.0 host ports Misc – Kensington lock hole, power button, power LED, HDD LED, […]

March 17, 2017March 17, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Dell Edge Gateway 3000 Series Are Powered by Intel Bay Trail-I SoCs for Automation, Transportation, and Digital Signage

Dell has recently introduced Edge Gateway 3000 series with three models powered by Intel Bay Trail-I processor, running Ubuntu Core 16 or Windows 10 IoT, with each model targeting respectively general-purpose automation, transportation & logistics, and digital signage and retail. The specifications for the three models can be found in the table below. Dell Edge Gateway 3001 Model for General-Purpose Automation Dell Edge Gateway 3002 Model for Transportation & Logistics Dell Edge Gateway 3003 Model for Media & Retail Kiosks SoC Intel Atom E3805 dual core processor @ 1.33 GHz (3W TDP) Intel Atom E3815 single core processor @ 1.46 GHz with GPU @ 400 MHz (5W TDP) System Memory 2 GB DDR3L-1066 Storage 8 or 32 GB eMMC flash Industrial-grade Micro-SD card: 8GB / 16GB / 32 GB / 64 GB Connectivity 1 x 10/100 Fast Ethernet (RJ-45) with PoE (15.4W) WiFi 802.11 b/g/n Bluetooth 4.0 LE Optional ZigBee […]

December 13, 2016December 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Samlinking D240 Mediatek MT7620A Router Boards Support Two 4G LTE mini PCIe Modules, PoE for $38 and Up

Samlinking Technologies, a manufacturer of 4G WiFi integrated solution based in Shenzhen, has launched D240 router board powered by Mediatek MT7620A MIPS processor with 128MB RAM, 64 MB flash, four Fast Ethernet LAN ports, one Fast Ethernet WAN port with PoE, as well as two PCIe slots accepting 4G LTE modems.Three Samlinking D240 models are available with D240A1, D240A2, and D240A3 with different combination of LTE module, and 802.11 b/g/n and/or 802.11ac connectivity. SoC – Mediatek MTK7620A MIPS processor @ 580MHz System Memory – 128MB Storage – 64MB flash + micro SD card slot Connectivity 802.11 b/g/n/ac up to 300, or 300 + 867 Mbps depending on model+ 2 u.FL connectors 5x 100 Mbps Ethernet port (RJ45) with 4 LAN ports, 1 WAN port with PoE 802.3af 2x PCIe slot with LTE Cat3 to Cat 6 modem cards 2x SIM card slots Serial – 1x 4-pin header USB – 1x […]

November 2, 2016July 31, 2019 by Jean-Luc Aufranc (CNXSoft) - 80 Comments

Orange Pi Zero Allwinner H2+ Board with WiFi and Ethernet is Up for Sale for $7 and Up

Orange Pi Zero development board powered by Allwinner H2+ quad core Cortex A7 processor with 256 to 512MB RAM, Ethernet, and USB ports is now available for sale on Aliexpress for just $6.99, with shipping adding $3.39 in my case bringing the total to $10.38. Orange Pi Zero specifications: SoC – Allwinner H2(+) quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 256 to 512 MB DDR3-1866 SDRAM Storage – micro SD card slot Connectivity – 10/100M Ethernet + 802.11 b/g/n WiFi (Allwinner XR819 WiFi module) with u.FL antenna connector and external antenna USB – 1x USB 2.0 host ports, 1x micro USB OTG port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and IR receiver signals Debugging – Unpopulated 3-pin header for serial console Misc – 2x LEDs Power […]