poe News - Page 10 of 12 - CNX Software

July 16, 2019July 16, 2019 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

3 Ways to Power Devices with PoE: Wall Plug, Multi-port Injectors, and Injector/Splitter Cables

I regularly browse new arrivals feeds of popular websites to look out for interesting products, and I’ve noticed Banggood has several inexpensive PoE plugs and injectors going for around $6, which is quite cheaper than I would have expected. Apart from MatchX LoRaWAN gateway, I’ve never really used PoE to power devices, but I may soon have another look on Raspberry Pi 4 board with a third-party PoE HAT. PoE is mostly interesting if you need to run long cables to your boards or IP cameras since using a single Ethernet cable for data and power saves on cabling. 24V/48V PoE Plugs for the European market Banggood had three PoE plugs with prongs made for the European market: 48V/0.5A (24W) PoE Wall Plug 12V/1A (12W) PoE Wall Plug 24V/1A (24W) POE Wall Plug All three plugs are visually identical with a LAN port to connect to your router, and a […]

June 26, 2019June 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Banana BPI-P2 Maker SBC with PoE Support Sells for $13 and Up (Promo)

Last year SinoVoIP introduced Banana BPI-P2 Zero board powered by Allwinner H2+ processor with 512MB, 10/100M Ethernet with Power-over-Ethernet, WiFi & Bluetooth, a mini HDMI port, and an 8 GB eMMC flash. They also launched a lower cost version without eMMC flash nor wireless module for $16, and the optional PoE module going for $6 extra. The company is now selling the board at a promotional price of $13 without PoE, and $19 with RT9600 POE module. The shipping fee is not included in those prices however, and in my case, the prices end up at respectively about $25 and $31 with shipping. Banana Pi BPI-P2 Maker specifications: SoC – Allwinner H2+ quad-core Arm Cortex A7 processor with Mali-400MP GPU. System Memory – 512MB DDR3 SDRAM. Storage – microSD card slot Video Output – mini HDMI port Connectivity – 10/100M Ethernet with optional PoE support Camera I/F – Parallel CSI […]

October 8, 2018October 8, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

wESP32 ESP32 Board Supports “Isolated” PoE (Crowdfunding)

Olimex introduced their ESP32-POE board a few months ago, and started selling it for 17.50 Euros last month, but it’s always good to have more options and Silicongnition has designed another ESP32 board with power over Ethernet named wESP32. wESP32 board specifications: Wireless Module – Espressif Systems ESP32-WROOM-32 module with WiFi 802.11n (WiFi 4) and Bluetooth 4.2 LE connectivity Connectivity 10/100M Ethernet (RJ45) with auto-MDIX allowing the use of both straight and cross-over Ethernet cables Wi-Fi 802.11 b/g/n and Bluetooth v4.2 BR/EDR (via ESP32 module ) Expansion – Unpopulated 20-pin header with 3.3 V, V+ power, and 15 of the ESP32 GPIOs Power Supply Default 12 V output setting for V+ provides 12.95+ W of power Optional (bridge solder jumper) 5 V output setting for V+ provides 5 W of power IEEE 802.3at Type 1 Class 0 compliant PoE 3.3 V output with up to 6 W of power (taken […]

September 14, 2018September 14, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Raspberry Pi PoE HAT Launches, But Refunds Offered due to Power Issues

The Raspberry Pi foundation has launched a good number of boards and accessories, and although some people will question some of the design choices, their boards were fairly bug-free hardware-wise at launch, except for minor issues like the board rebooting while taking a photo with a Xenon flash. Recently they also had performance issues with Gigabit Ethernet in the Raspberry Pi 3 B+ board, but that looks like more of a software issue. The Raspberry Pi PoE HAT announced with Raspberry Pi 3B+, but launched at the end of August for $20, however suffers from a more serious issue as it somehow limits USB current to 200mA instead of the usual 500mA, meaning that’s fine with USB keyboard and mouse, but as soon as you connect more power hungry peripherals like a USB hard drive, all hell breaks loose. Let’s check out the specifications first: 802.3af PoE Fully isolated switched-mode […]

August 2, 2018November 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Banana Pi BPI-P2 Zero Board Combines PoE, Camera Interface, and Allwinner H2+ Processor

Allwinner H2+ quad core Cortex A7 processor has enabled some of the cheapest Arm Linux boards on the market with products such as NanoPi Duo or Orange Pi Zero with the latter now selling for about $9 and up. SinoVoIP also had their own inexpensive – and Raspberry Pi Zero compatible – Allwinner H2+ board with Banana Pi M2 Zero, and the company has now been working on another model dubbed BPI-P2 Zero which includes support for PoE (Power-over-Ethernet) as well as a CSI camera interface. Banana Pi BPI-P2 Zero specifications: SoC – Allwinner H2+ quad core Arm Cortex A7 processor with Mali-400MP GPU. System Memory – 512MB DDR3 SDRAM. Storage – 8GB eMMC flash, micro SD card slot Video Output – mini HDMI port Connectivity 10/100M Ethernet with PoE support WiFi & Bluetooth via AP6212 module Camera I/F – CSI camera interface USB – 1x USB OTG port Expansion […]

July 27, 2018July 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Banana Pi BPI-R64 Router Board is Powered by Mediatek MT7622, Supports 802.11ac WiFi, Optional PoE Module

SinoVoIP launched several Banana Pi router boards in the past starting with Allwinner A20 based Banana Pi BPI-R1 in 2014, and followed by Banana Pi BPI-R2 board powered by a Mediatek MT7623 processor last year. Such boards normally include multiple Gigabit Ethernet ports, as well as at least one SATA connector, and in some cases an mPCIe connector for WiFi or LTE cards. THe company also launched Banana Pi BPI-W2 board a few months ago, but that model is more geared towards multimedia router use cases. The company has now unveiled Banana Pi BPI-R64 router board based on Mediatek MT7622 dual core Arm Cortex-A53 processor, five Gigabit Ethernet port, on-board 802.11ac WiFi, one “laptop” SATA port, as well as an optional PoE (Power-over-Ethernet) add-on board.Banana PI RPI-R64 board specifications provided by the company – which has not always shown to be accurate -: SoC – MediaTek MT7622 dual-core Arm Cortex-A53 […]

July 26, 2018September 7, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Olimex Unveils ESP32-POE Board with… PoE Support

One of the differences between ESP8266 and ESP32 is the latter adds an Ethernet MAC, and as a results we have seen a few ESP32 boards with an Ethernet jack offering 10/100M connectivity, including Olimex ESP32-GATEWAY, Olimex ESP32-EVB, or ESP32 Monster Board. ESP32 Ethernet enabled boards are definitely in the minority however, and what’s even more difficult to find is an ESP32 board with Power-over-Ethernet (PoE) support. The good news is that if you’re looking for such type of board, Olimex is working on one based on requirements from their customers. Olimex ESP32-POE board specifications: Wireless module – ESP32-WROOM-32 module with 802.11 b/g/n WiFi and Bluetooth LE External Storage – micro SD card socket Connectivity – 10/100M Ethernet with PoE power management based on Si3402 IEEE 802.3at Type 1-compliant chip Expansion UEXT connector for Olimex modules 2x GPIOs stripes spaced at 1″ on 0.1″ step Debugging/Programming – micro USB port […]

June 28, 2018June 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MintBox Mini 2 Apollo Lake Linux Mini PC Launched for $300 and Up

Mintbox Mini 2 / Mini 2 Pro (MB2M) Linux mini PC based on Intel Celeron J3455 Apollo Lake processor and running Linux mint 19 was first announced in March of this year. Compulab has now announced availability of both models, as well as some extra add-on boards: PoE Ethernet device FACET card, 2.5″ HDD FACET card, and GPIO + serial + CANbus FACET Card. The main specifications have not changed with the main differences between the two models between the memory and storage capacities: SoC – Intel Celeron J3455 quad core processor @ 1.5 / 2.2 GHz with 12 EU HD graphics; 10W TDP System Memory & Storage MB2M – 4GB DDR3L-1866 (upgradeable to 16GB via 1x 204-SO-DIMM slot) + 64GB M.2 SSD + micro SD slot MB2M Pro – 8GB DDR3L-1866 (upgradeable to 16GB via 1x 204-SO-DIMM slot) + 120GB M.2 SSD + micro SD slot Display – mini DP […]