orange pi News - Page 10 of 22 - CNX Software

July 3, 2019July 3, 2019 by Tiwalade Joanna Okedara - 2 Comments

M2M-IoT GW-01 LoRaWAN Gateway is equipped with Orange Pi Zero H2+ SBC

M2M-IoT has developed a new LoRa gateway. The gateway, GW-01, is based on Orange Pi Zero H2+ board. While it is new, it has a lot of useful features. The new GW-01 gateway operates in the 868MHz or 915MHz LoRa frequencies and has -139 dBm sensitivity. Furthermore, the GW-01 is fully functional. It is also an open source low-cost solution to developing a LoRaWAN network. In addition, the gateway supports both OpenWrt, and Armbian distributions, and you’ll find documentation for both on Github. Another great thing about the gateway is that it has two boards. Also, the first board, which is on top, is based on SX1301. This 8 channel LoRa concentrator implements the LoRa physical interface. Now, the second board is at the bottom. It is also the model that the whole gateway was based on. This board is the OrangePi Zero H2+ 256MB (RAM) development board. The gateway […]

June 22, 2019June 28, 2019 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Create Minimal Debian Upstream Images with Debos and Armbian

Debos Armbian Debian Orange Pi Zero Plus 2 H5

[Update June 28: Post updated with correct procedure thanks to Collabora help] Armbian provides lightweight Debian or Ubuntu images for various Arm Linux SBC, and over the years has become the recommended source for stable firmware images for boards part of Orange Pi & Banana Pi families, and others. Uncompressed images are still over 1GB and come with Armbian-specific tools, kernel and bootloader. If you’d like to leverage Armbian images, but instead create a Debian upstream image with only the packages you intend to use, Collabora explains how to do just that with Orange Pi Zero +2 H5 and Libre Computer AML-S905X-CC (aka Le Potato) boards using Debos Debian OS builder. I’ve decided to give a try at the instructions for Orange Pi Zero Plus2 H5 in my laptop running Ubuntu 18.04 to better understand how this all works. I’ll assume you’ve already installed Docker, and made sure you’ve got […]

June 13, 2019June 13, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

New Release (1.3.5) for H3Droid Android OS Optimized for Allwinner H3 & H2+ Processors

H3Droid project provides Android images for Allwinner H3 & H2+ boards and TV boxes in order to improve on the firmware released by manufacturers. Last time we wrote about was in 2017, but the project released H3droid 1.3.5 recently with several improvements.. The good news is that more boards are supported with a bit fix that for example enables H3Droid to work on Orange Pi Zero (256MB RAM) and Libre Computer Tritium H2+ SBC’s, but the bad news is that it’s still based on Android 4.4 Kitkat, so some apps are not working anymore including Kodi, and the default YouTube app had to be removed since it does work not anymore. Workarounds do exist though, as you can install SPMC fork of Kodi, and play YouTube videos in a web browser, or install it manually after updating Google Play Services. Here’s the full changelog provided by the developers: Added: fex/uboot […]

March 2, 2019March 2, 2019 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Orange Pi Software Releases – Android 9.0 Firmware, Linux Source Code for RK3399 / MT6737

Shenzhen Xunlong Software is used to release many different variations of their Orange Pi boards, and more often than not they tend to launch their boards fairly early before the software is fully ready. Many of their boards get supported by the community thanks to Armbian, linux-sunxi, etc… but sometimes the company does release firmware or source code themselves, as they did in the last two days with Android 9.0 firmware for one of their Allwinner H6 board, and Linux source code for Orange Pi 4G-IoT and Orange Pi RK3399. Android 9.0 for Orange Pi One Plus Launched in 2017, Orange Pi One Plus was the very first Allwinner H6 SBC launched on the market, and supported Android 7.0 at the time. But following the release of Android 9.0 for Allwinner H6 TV boxes a few weeks ago, you can now also upgrade your Orange Pi One Plus to Android […]

January 19, 2019January 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Orange Pi 3 Allwinner H6 SBC Comes with GbE, USB 3.0, mPCIe

When Shenzhen Xunlong Software launched their first Allwinner H6 development board, Orange Pi One Plus, many were disappointed as the board did not make use of some of the key features of H6 processor like USB 3.0 or PCIe, and RAM was limited to 1GB. A couple of weeks later, the company introduced Orange Pi Lite2 board with 802.11ac WiFi, a USB 3.0 port, HDMI 2.0a output, but no Gigabit Ethernet, nor PCIe interface, and again only 1 GB LPDDR3 memory. The good news is we now get a full-featured Allwinner H6 SBC thanks to Orange Pi 3 equipped with up to 2GB RAM, an optional 8GB eMMC flash, Gigabit Ethernet, 802.11ac WiFi 5, four USB 3.0 ports, HDMI 2.0a, a mPCIe slot, and more. There are four variants of the Orange Pi 3 board with either 1 or 2 GB RAM, with or without eMMC flash that share the […]

January 15, 2019June 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Orange Pi RK3399 Board Gets 4GB RAM for $100

Orange Pi RK3399 development board launched last year, further crowding the RK3399 space. The board did not target the lower end of the market with a $109 price tag, but still came with only 2GB of RAM. Shenzhen Xunlong has now introduced a 4GB RAM version of the board for $99.96, with the 2GB version now selling for $89.38. Both boards can be purchased on Aliexpress. Apart from the RAM capacity, Orange Pi RK3399 “4G” specifications have not changed: SoC – Rockchip K3399 hexa-core big.LITTLE processor with two ARM Cortex A72 cores up to 2.0 GHz, four Cortex A53 cores, and an ARM Mali-T860 MP4 GPU with support for OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL, and DX 11 System Memory – 4 GB DDR3 Storage – 16 GB eMMC flash, micro SD card, mPCIe (for mSATA/LTE), and SATA interface Video Output/Input & Display Interfaces 1x HDMI 2.0 up to […]

December 26, 2018December 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 4.20 Release – Main Changes, Arm and MIPS Architectures

After Greg K-H handling Linux 4.19 release, Linus Torvalds is back at the helm, and released Linux 4.20 just before Christmas: Let’s face it, last week wasn’t quite as quiet as I would have hoped for, but there really doesn’t seem to be any point to delay 4.20 because everybody is already taking a break. And it’s not like there are any known issues, it’s just that the shortlog below is a bit longer than I would have wished for. Nothing screams “oh, that’s scary”, though. And as part of the “everybody is already taking a break”, I can happily report that I already have quite a few early pull requests in my inbox. I encouraged people to get it over and done with, so that people can just relax over the year-end holidays. In fact, I probably won’t start pulling for a couple of days, but otherwise let’s just […]

December 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Orange Pi 3G-IoT Board Finally Gets a Linux Image

Shenzhen Xunlong has launched several cellular IoT boards over the last few years with Orange Pi 2G-IoT, Orange Pi 3G-IoT and Orange Pi 4G-IoT, but each time, they are launched with Android support only. Linux support on the 2G board has never been great, while the Android 8.1 SDK for Orange Pi 4G-IoT was released earlier this year, but no Linux image are available. This leaves us with Orange Pi 3G-IoT board that just got its first Linux based firmware images released today on both Baidu and Google Drive cloud storage storage services. Four images are available for Orange Pi 3G-IoT-A (256MB DDR2) and Orange Pi 3G-IoT-B (512MB DDR2) boards with images booting from eMMC flash or micro SD card. A shell script (tar_image.sh) is provided to flash the image to the micro SD card since the latter for follow a specific partition layout. Sadly, there’s no mention of the […]