open source News - Page 94 of 101 - CNX Software

January 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Etnaviv Project Vivante GCxxx GPU Open Source Driver

You have most probably heard of Lima, an initiative to provide fully open source Mali-200 & Mali-400 drivers by reverse-engineering the closed source Mali GPU drivers. A separate effort, Etnaviv Project, has now started to offer open source drivers for Vivante GCxxx GPU used in SoC such as Marvell Armada 1500 (notably used in mainly Google TV platforms), Rockchip RK2918 (present in many older tablets), Freescale i.MX6 (used in newer tablets, low cost development boards, some SoMs and GK802/Hi802 mini PCs). The project is called Etnaviv. The introduction of Etnaviv Project reads as follows on the corresponding Github account: Project Etnaviv is an attempt to make an open source user-space driver for the Vivante GCxxx series of embedded GPUs. The current state of the project is experimental. It is currently only of use to developers interested in helping develop open source drivers for the hardware, reverse engineering, or in interfacing […]

January 4, 2013January 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$159 CuBox Pro: Open Source Development Platform Based on Marvell ARMADA SoC

Back in 2011, SolidRun unveiled the CuBox, a miniature open source development platform based on Marvell Armada 510 SoC (88AP510) and aimed at applications such as multimedia, set-top-box, network attached storage (NAS), thin client, digital signage, automation… SolidRun has now announced an upgraded version called CuBox Pro based on the same platform but with 2 GB RAM, and a redesigned casing. Here are the specifications of this development platform: Marvell Armada 510 SoC – 800 MHz dual issue ARM PJ4 processor, VFPv3, wmmx SIMD and 512KB L2 cache. 2GByte DDR3 at 800MHz 1080p Video Decode Engine OpenGL ES 2.0 graphic engine HDMI 1080p Output (with CEC function) Gigabit Ethernet, SPDIF (optical audio), eSata 3Gbps, 2xUSB 2.0, micro-SD, micro-USB (console) Standard Infra-red receiver for 38KHz based IR controllers. No JTAG required. Unbrickable for Developers (i.e. you can’t brick the device to the point you have to physically remove the flash, burn it […]

December 23, 2012December 24, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Toradex Open Sources Oak USB Sensors & Interface Boards

Toradex Oak product family is a range of USB sensors enabling measurement of humidity, temperature, motion, orientation… and USB expansion boards with relays, digital I/O and more. Following feedback from customers who needed to customize the designs, Toradex decided to fully open source those sensors and interfaces by releasing hardware files and the source code under Creative Commons License ‘Attribution CC BY’. This release brings 13 USB sensors to the open source community: Oak USB Sensor Atmospheric Pressure Oak USB Sensor 3 Axes Acceleration Oak USB Sensor Angular Rotation Oak USB Sensor Humidity Oak USB Sensor IR Distance Triangulation (10-60cm) Oak USB Sensor IR Motion Detection Oak USB Sensor Luminosity (LUX) Oak USB Sensor Orientation (3-Axes Accelerometer & Magnetometer) Oak USB Sensor 3 Axes Tilt/Inclination Oak USB Sensor IR Distance Triangulation (10-80cm) Oak USB Sensor 2 Channels Thermocouple Oak USB Sensor 4 Channels Capacitive Proximity Switch Oak USB Sensor RGB […]

December 19, 2012December 19, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

3.95 Euros RPI-UEXT Breadboard & UEXT Adapter for Raspberry Pi is Now Available

Last month, I wrote about an upcoming T-shaped adapter for the Raspberry Pi that can easily plug into a breadboard, and provides a UEXT connector that can bring new features (RTC, GPRS, sensors, relays…) to the Raspberry Pi via low cost external UEXT modules. Olimex has just announced the RPI-UEXT adapter is now available for 3.95 Euros. To connect RPI-UEXT adapter to the Raspberry Pi, you’ll need to purchase a 26-pin ribbon cable and a breadboard if you don’t have these already. Olimex provides those 2 for respectively 2 & 2.95 Euros. That means a complete set would cost 8.90 Euros. As discussed on my first RPI-UEXT post, what makes this little board really interesting are all the existing UEXT modules (over 20) that bring new features at very low cost. Olimex uploaded a video showing the Raspberry Pi, the RPI-UEXT and the MOD-IO UEXT module connected together, with the Raspberry […]

December 16, 2012December 21, 2012 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Build Your Own Freescale i.MX6 Quad Laptop

Andrew Huang (“Bunnie”) and others have been working on an open source laptop based on Freescale i.MX6 Quad processor since June, and they’ve recently got the motherboard. Beside featuring a powerful quad core ARM processor, the design files are also provided, so if you have the right skills and resources you can build it yourself. The open source laptop mainboard (Codename: Novena) has the following specifications: SoC – Freescale iMX6 Quad @ 1.2GHz with Vivante GC2000 GPU System Memory – 64-bit DDR3-1066 SO-DIMM, upgradable to 4GB Storage – microSD boot flash, SATA-II connector for hard drive / SSD, SD card reader and serial EEPROM (for storing crash logs and other bits of handy data). FPGA – Spartan-6 CSG324. It has several interfaces to the CPU, including a 2Gbit/s RAM-like bus. Internal ports & sensors: mini PCI-express slot UIM slot for mPCIx mobile data cards Dual-channel LVDS LCD connector (up to […]

December 10, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Open Hardware System on Module Project

“JM” has started working on a system-on-module project with the goal “to create a whole range of SoM boards and motherboards that can handle a large number of embedded projects”. He has just released schematics and layout files created with Kicad for a dual NXP LPC1764 SO-DIMM module and the baseboard under GPL3 license. The next goal is to release an AllWinner A10 SoM and corresponding baseboard. Kicad is an open source schematics capture and PCB layout software that can run in Windows, Linux and Mac. If you want to read the schematics or try it out, you can freely download it. In Ubuntu you could just use apt-get:

sudo apt-get install kicad fped

1	sudo apt-get install kicad fped

The hardware files for the module and carrier board are available here. JM explains that the LPC module and baseboard have already been manufactured and tested, so it could just be a matter of adapting the module for AllWinner A10/A20. […]

December 8, 2012December 14, 2012 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

HI802 HDMI TV Dongle (Freescale i.MX6) is Now Available

After many delays allegedly due to Freescale i.MX6 CPU delivery issues, Hiapad HI-802 mini PC appears to be now available for purchase on Aliexpress for $99 including shipping. This HDMI dongle features Freescale i.MX6 Quad, 1GB RAM and 8GB Flash. The specs on Aliexpress are similar to the original announcement, except the internal NAND flash size is 8GB instead of 16GB: SoC – Freescale i.MX6 Quad Core Cortex A9 @ 1.2GHz with Vivante GC2000 System Memory – 1GB DDR3 RAM Storage – 8GB Nand Flash + microSD card socket Connectivity 802.11b/g/n Build-in Bluetooth 2.1 No 3G support. Video Output – HDMI (Up to 1080p60) Video Container Formats – 3GP,MPEG4,AVI,RMVB,MKV,FLV etc. support 1080P HD Resolution Audio Formats – MP3/WAV/AMR/AAC; USB – Micro USB 2.0 OTG + USB 2.0 Host Power Supply – 5V/1.5A Dimensions – 102 x 38 x 10 mm Weight – 45 g This Android 4.0 (ICS) mini PC […]

November 27, 2012November 27, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Le Labo Citoyen Gasser – Raspberry Pi Based High Precision Pollution Monitoring System

“Le Labo Citoyen” is a recently founded French non-profit organization aimed at “promoting and experimenting with innovating and free technologies for the citizens and the environment”. Their first project is to gather pollution data (NO2, O3, and SO2 levels) in Paris using 2 (soon to be) open source components: Gasser – Self-contained mobile sensor currently powered by the Raspberry Pi ThingStream – Open source IoT datastore which should be similar to iDigi Cloud, except you can just store data in your own server or on “Le Labo Citoyen” servers. Gasser has four main parts: Sensor(s) – Alphasense B4-series sensors (black and red component in the top left of the main box) with accuracy of up to <10 ppb (parts-per-billion). Cost: ~110 Euros. They currently only use the NO2 (nitrogen dioxide) sensor. ADC & Computer – Raspberry Pi (Cost: ~30 Euros) & Delta-Sigma ADC (Cost: ~30 Euros). Communication Medium – Huawei […]