nvidia News - Page 12 of 20 - CNX Software

August 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

NVIDIA Jetson TX1 Developer Kit SE Offered for $199 (Promo)

Launched in 2015, NVIDIA Jetson TX1 developer kit integrates some serious processing power with a Jetson TX1 module with a 256-core Maxwell GPU, four Cortex A57 cores, 4GB RAM, 16GB eMMC, and plenty of ports and I/Os via a mini-ITX carrier board. The only problem is that it’s quite expensive, as it was launched with an official $599 price tag, and it’s still $579 on Amazon US. The good news is that NVIDIA decided to launch a promotion for Jetson TX1 Developer Kit SE, based on the same $500+ development kit minus USB cable and camera module, and offered for just $199. Let’s refresh our memory with the board’s specifications: Jeston TX1 module NVIDIA Maxwell GPU with 256 NVIDIA CUDA Cores Quad-core ARM Cortex-A57 MPCore Processor 4 GB LPDDR4 Memory 16 GB eMMC 5.1 Flash Storage Connects to 802.11ac Wi-Fi and Bluetooth enabled devices 10/100/1000BASE-T Ethernet NVIDIA Jetson TX1 Carrier […]

May 24, 2017May 24, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Getting Started with OpenCV for Tegra on NVIDIA Tegra K1, CPU vs GPU Computer Vision Comparison

This is a guest post by Leonardo Graboski Veiga, Field Application Engineer, Toradex Brasil Introduction Computer vision (CV) is everywhere – from cars to surveillance and production lines, the need for efficient, low power consumption yet powerful embedded systems is nowadays one of the bleeding edge scenarios of technology development. Since this is a very computationally intensive task, running computer vision algorithms in an embedded system CPU might not be enough for some applications. Developers and scientists have noticed that the use of dedicated hardware, such as co-processors and GPUs – the latter traditionally employed for graphics rendering – can greatly improve CV algorithms performance. In the embedded scenario, things usually are not as simple as they look. Embedded GPUs tend to be different from desktop GPUs, thus requiring many workarounds to get extra performance from them. A good example of a drawback from embedded GPUs is that they are […]

March 9, 2017March 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NVIDIA Shield Android TV Gets Unofficial USB Tuner (ATSC/DVB) Support

NVIDIA Shield Android TV may only be available in a limited number of countries, but if you happen to live in a country where it’s officially sold, it can be one of the best options due its hard-to-beat price to performance ratio, and official Android TV software support from Google & Nvidia. One features it does not support out of the box is support for digital TV tuner, but linux4all has released an unofficial firmware image adding USB TV tuner support to Android TV (7.0) on Nvidia Shield Android TV 2015 and 2017 models. You’ll first need a supported tuner either Hauppauge WinTV-dualHD (DVB-C, DVB-T and DVB-T2), Hauppauge WinTV-HVR-850 (ATSC), Hauppauge WinTV-HVR-955Q (ATSC, QAM, Analog), or Sony PlayTV dual tuner (DVB-T). More tuners may be supported in the future. One you’ve got your tuner connected to Nvidia Shield Android TV, make sure you have the latest Android TV 7.0 OTA […]

March 8, 2017March 8, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

NVIDIA Introduces Jetson TX2 Embedded Artificial Intelligence Computer

NVIDIA has just announced an upgrade to to their Jetson TX1 module, with Jetson TX2 “Embedded AI Computer” with Tegra X2 Parker SoC that either doubles the performance of its predecessor, or runs at more than twice the power efficiency, while drawing less than 7.5 watts of power. The company provided a comparison showing the differences between TX1 and TX2 modules. Jetson TX2 Jetson TX1 GPU NVIDIA Pascal, 256 CUDA cores NVIDIA Maxwell, 256 CUDA cores CPU HMP Dual Denver 2/2 MB L2 + Quad ARM® A57/2 MB L2 Quad ARM® A57/2 MB L2 Video 4K x 2K 60 Hz Encode (HEVC) 4K x 2K 60 Hz Decode (12-Bit Support) 4K x 2K 30 Hz Encode (HEVC) 4K x 2K 60 Hz Decode (10-Bit Support) Memory 8 GB 128 bit LPDDR4 58.3 GB/s 4 GB 64 bit LPDDR4 25.6 GB/s Display 2x DSI, 2x DP 1.2 / HDMI 2.0 / […]

December 20, 2016December 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Second Generation NVIDIA Shield Android TV Box Photos Leaked Ahead of Launch

NVIDIA Shield Android TV box may have launched in the first part of 2015, but even at the end of 2016 it’s still one of the best Android TV boxes with a powerful Tegra X1 processor, 3GB RAM, 4K video support, HD audio pass-through, the fastest GPU found in TV boxes so far, Netflix HD & 4K certified, and more. The company is allegedly preparing to launch a new model, and some photos have been leaked to Android Police. The design of the box looks basically identical to the new model, but it comes in two different sizes maybe because of extra ports and internal storage, and the game controller has been re-designed with a mix of triangular shapes. What we don’t know are the specifications. The company may have done a simple refresh, keeping Tegra X1 processor, increasing the memory and storage capacity, and possibly adding some extra interfaces, […]

September 29, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nvidia Unveils Xavier Automotive & AI Octa-core SoC with 512-Core Volta GPU, 8K Video Decode & Encode

Nvidia has introduced the successor to their Parker SoC mostly targeting self-driving cars and artificial intelligence applications, with Xavier SoC featuring 8 custom ARMv8 cores, a 512-core Volta GPU, a VPU (Video Processing Unit) supporting 8K video decode and encode and HDR (High Dynamic Range), as well as a computer vision accelerator (CVA). The processor will deliver 20 TOPS (trillion operations per second) of performance, while consuming only 20 watts of power, and since it’s designed specifically for autonomous cars, it will comply with automotive safety standards such as ISO 26262 functional safety specification. Anandtech published a comparison table with Tegra X1 (Erista), Parker, and Xavier using currently available information. Xavier Parker Erista (Tegra X1) CPU 8x NVIDIA Custom ARM 2x NVIDIA Denver + 4x ARM Cortex-A57 4x ARM Cortex-A57 + 4x ARM Cortex-A53 GPU Volta, 512 CUDA Cores Pascal, 256 CUDA Cores Maxwell, 256 CUDA Cores Memory ? LPDDR4, […]

August 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Nvidia Provides More Details About Parker Automotive SoC with ARMv8 Cores, Pascal GPU

Nvidia demonstrated DRIVE PX2 platform for self-driving cars at CES 2016, but did not give many details about the SoC used in the board. Today, the company has finally provided more information about Parker hexa-core SoC combining two Denver 2 cores, and four Cortex A57 cores combining with a 256-core Pascal GPU. Nvidia Parker SoC specifications: CPU – 2x Denver 2 ARMv8 cores, and 4x ARM Cortex A57 cores with 2MB + 2 MB L2 cache, coherent HMP architecture (meaning all 6 cores can work at the same time) GPUs – Nvidia Pascal Geforce GPU with 256 CUDA cores supporting DirectX 12, OpenGL 4.5, Nvidia CUDA 8.0, OpenGL ES 3.1, AEP, and Vulkan + 2D graphics engine Memory – 128-bit LPDDR4 with ECC Display – Triple display pipeline, each at up to 4K 60fps. VPU – 4K60 H.265 and VP9 hardware video decoder and encoder Others: Gigabit Ethernet MAC Dual-CAN […]

August 1, 2016August 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Have Your Say with this Android TV Box Survey (and Potentially Win One)

While you probably know what you want in an Android TV box, it’s quite difficult to find out what the market wants exactly, so I’ve been asked to run a short survey about Android TV boxes, the importance of Android apps like Kodi, Plex, or Netflix, brands, and support. It will run for about 7 days, the results will be public, so I’ll post them once they become available. The survey is short – 5 questions -, and anonymous, except if you want to participate in the lucky draw to win one Android TV box, as you have to leave an email address. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com