nougat News - Page 7 of 13 - CNX Software

July 27, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Meizu Pro 7 is a Dual Camera Dual Display Android Smartphone

Smartphones with dual rear cameras are becoming more common, and we’ve see some smartphones in the past with an extra rear display such as Yotaphone 2. Meizu Pro 7 and Pro 7 Plus smartphones combines both features, but instead of using an E-Ink or other e-Paper display for the secondary display, Meizu used an 1.9″ AMOLED display that automatically turns on when you flip the phone, and can be used to check the time or notifications while the main display is still off. Meizu Pro 7 / Pro 7 Plus partial specifications: SoC – Mediatek Helio X30 deca-core processor with 2x cortex A73 cores @ up to 2.6 GHz, 4x cortex A53 cores @ up to 2.2 GHz, and 4x cortex A35 cores @ up to 2.0 GHz, as well as Imagination PowerVR 7XT GPU System Memory Pro 7 – 4GB LPDDR4x Pro 7 Plus – 6GB LPDDR4x Storage Pro […]

July 25, 2017July 25, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

HiMedia Q30 TV Box Review – Part 2: Android 7.0 Nougat Firmware

HiMedia Q30 is an Android Nougat TV box powered by Hisilicon Hi3798MV200 processor, a cost-down version of Hi3798C V200 processor with the same CPU, a lower-end Mali-450MP GPU, about the same media capabilities, and less I/Os. I’ve taken pictures of the device and board if the first part of the review entitled “HiMedia Q30 (Hisilicon Hi3798MV200) Android TV Box Review – Part 1: Unboxing and Teardown“, so today, I’ll report about my experience with the device while running Android 7.0. First Boot, Setup, and First Impressions I’ve connected a USB 3.0 hard drive to the single USB 3.0 port, and filled the two other USB 2.0 ports with a USB keyboard, and a USB hub with two RF dongles for an air mouse and a gamepad. I added Ethernet, HDMI, and power cable to start the device. A typical boot takes around 25 seconds to the Android launcher below. That’s […]

July 24, 2017July 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Rockchip RK3328 based MXR PRO TV Box Boasts 4GB RAM, 32GB Flash

Most users of TV boxes will do just fine with 2 GB RAM, especially with lower end ARM Cortex A53 systems, but if you have somewhat low processing needs, but high memory requirements, MXR Pro TV box powered by Rockchip RK3328 quad core Cortex A53 processor, and running Android 7.1 comes with 4GB RAM, and 32GB storage. MXR PRO 4K TV box specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP2 GPU System Memory – 4GB DDR3 Storage – 32 GB eMMC flash + SD card slot Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite) Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, MPEG-1/2/4, VP6/8 Audio – Via HDMI, AV port (stereo audio), and 3.5mm coaxial S/PDIF jack Connectivity – 10/100M Ethernet, single band 802.11 b/g/n WiFi USB – 3x […]

July 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Phoenix OS 2.1 Android 7.1 based Desktop OS Released for 32-bit and 64-bit x86 Platforms

With Jide’s announcement that they’d stop working on Remix OS for the consumer market, focusing on the enterprise market instead, people who like to use Android as a desktop OS lost an option. Luckily, others have not given up on the concept yet, and Phoenix OS 2.1 based on Android 7.1 with desktop improvements has just been released for computers based on Intel/AMD 32-bit and 64-bit x86 processors. Phoemix OS user interface is a mix between Windows desktop with a desktop, a taskbar, and a start menu, and Android with notifications, and Back/Home/Recent buttons. The OS also supports Android apps, multi-window, window resizing, better multi-tasking, and so on. Changelog for Phoenix OS 2.1: Keyboard mapping updates to version 2.5 with smart casting for Strike of Kings. The bug that window size won’t be saved after restart has been fixed. Enhance the hardware compatibility, including: sound card, network adapter, etc. “Start […]

July 17, 2017July 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Le Potato Development Board Review – Part 1: Hardware and Accessories

Libre Computer launched AML-S905X-CC “Le Potato” board on Kickstarter last month, and since then there have been some updates such as worldwide shipping, so the board will now ship to most countries, not only in Europe or the US, and various designs of the case have been proposed. You can check the updates on Kickstarter for details. Libre Computer Le Potato Kit Unboxing The company also sent me a Le Potato board, but not only, as I received a complete kit… … similar to the $99 “2GB eMMC kit” reward on KS with a board with 2GB RAM, a 64GB eMMC flash module, a HDMI cable, and a 5V/2.5A power supply with on/off switch, but a different case, cooling fan, and corresponding rubber pad and screws. The case exposes all external ports, and has holes on top for the fan. The other side includes the micro SD slot, plenty of […]

July 16, 2017July 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ROCK64 Board Review – Part 1: eMMC Flash Module, Android 7.1 Firmware, Benchmarks, and Kodi

ROCK64 is the second ARM Linux development board by Pine64 that is based on Rockchip RK3328 processor, instead of Allwinner 64 for Pine A64 board, and while both processors comes with four Cortex A53 cores, the Rockchip processor offers a faster GPU, 4K @ 60 Hz video support, as well as USB 3.0 support. I’ve got a sample with an eMMC flash module, and I’m going to test it first with Android 7.1, since those were the only firmware images currently available on the Wiki, but Linux will be available before the board ships publicly at the end of July. Rock64 Linux Ports Status There are now at least three Linux ports in progress: ayufan’s Debian Jessie and Ubuntu Xenial images which are now in pre-release, but should officially be released next week. Arch Linux ARM with no pre-built Rock64 images yet Fedora 25 minimal Image The Yocto Project support […]

July 14, 2017July 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Bqeel MVR9 TV Box Review – Part 1: Specifications, Unboxing and Teardown

All Rockchip RK3328 based 4K TV boxes I’ve seen so far come with Fast Ethernet, not Gigabit Ethernet, with the exclusion of Rock64, which is not a TV box, but a development board. But Nagrace sent me Bqeel MVR9 box that comes with Gigabit Ethernet, in order to write a review. I’ll start by having a look at the hardware first, before experimenting with the firmware in several weeks. Bqeel MVR9 Specifications SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP2 GPU System Memory – 2 GB DDR4 @ 1066 MHz Storage – 16 GB eMMC flash + micro SD card slot Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video) Video Codec – 4K VP9, H.265 and H.264, 1080p VC-1, MPEG-1/2/4, VP6/8 Audio Output – Via HDMI, and AV (stereo audio) ports; optical S/PDIF […]

July 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

H96 Pro Octa Core TV Dongle Runs Android 7.1.1 on Amlogic S912 Processor

That one will be confusing as H96 Pro is already a TV box, but somebody must have thought that model number was so good, it had to be re-used in another products. So I present to your H96 Pro TV dongle powered by the same Amlogic S912 processor running Android 7.1.1 Nougat. It’s not the first octa-core HDMI TV stick, as we’ve seen MeegoPad A02 (Allwinner A83T) and NEXBOX 809VI (Rockchip RK3368) in the past, but AFAICR I have not come across Amlogic S912 sticks before. H96 Pro HDMI TV stick specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 GPU System Memory – 2GB DDR3 Storage – 8 GB eMMC flash, micro SD slot up to 32GB Video & Audio Output – HDMI 2.0a male connector with HDR support Video Codec – 4K H.265 and VP9 @ 60 fps, 4K […]