nfc News - Page 10 of 12 - CNX Software

June 12, 2012August 5, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Adafruit mbed and NFC/RFID Starter Pack with µNFC stack & NFC Mood Lamp Demo

If you are looking for a (relatively) low cost NFC development kit, you may interested in Adafruit mbed and NFC/RFID Starter Pack that sells for 134.99 USD. The kit contains the following items: mbed LPC1768 (Cortex M3) development board with mini-B USB cable and reference cards NFC/RFID breakout board based on PN532 NFC transceiver MiFare RFID card with 1K programmable EEPROM Full-sized breadboard 40 x 3″ (75mm) long male/male jumper wires Standard blue & white 16×2 character LCD + contrast potentiometer + header Diffused 5mm RGB LED + 3 x 560 ohm resistors Analog temperature sensor (TMP36) Piezo buzzer 2 x 10K trim potentiometer 5 x Tactile Pushbuttons On the software side, you can use AppNearMe µNFC stack written in C++ that allows you to use a user interface on NFC-enabled smartphone, removing the need for knobs, buttons, screens on your embedded device. During the initial pairing, the NFC board can […]

June 5, 2012June 5, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Marvell Avastar 88W8897: Wifi 802.11ac, NFC and Bluetooth 4.0 Chip

Marvell has announced the Avastar 88W8897, a low-power radio chip supporting 802.11ac, near field communication (NFC) and Bluetooth 4.0, aimed at mobile and HD multimedia devices such as ultrabooks, tablets, gaming consoles and smart TVs. Marvell claims the 88W8897 SoC enables a rest of bill of materials (RBOM) footprint reduction of 40-to-50 percent and cost reduction of 75 percent compared to previous wireless solutions. Key features of Marvell Avastar 88W8897 chip include: Wi-Fi 802.11ac – This standard increases bandwidth available over the Wi-Fi link (theoretically up to 1 Gb/s) with throughput up to 867 Mbps for the 88W8897. This kind of throughput allows reliable high-definition (HD) video streaming, tunneled direct link setup (TDLS) and high-speed wireless backup and sync for mobile devices. NFC – NFC allows consumers to pay for items with the tap of a phone via mobile commerce and point-of-sale (e-wallet) applications. It can also enable one-tap pairing […]

February 21, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Moneto microSD Card Brings NFC to Android Smartphones and iPhones

NFC (Near Field Communication) is a feature present in many new smartphones that allows wireless payment among other things. Until now, if you had an iPhone or an Android smartphone without an NFC chipset, you would not have been able to take advantage of NFC. But this is about to change thanks to Moneto, a prepaid mobile wallet that works with a microSD card embedding an NFC Chipset. The Moneto Android Kit (29.95 USD) comes with a 1GB microSD card, a Booster Sticker, aPrepaid Debit Card, the Moneto app and 10 USD pre-loaded onto the account. The Moneto iPhone Kit (79.95 USD) comes with a microSD card, an iCaisse case, a Prepaid debit card, the Moneto app and 10 USD pre-loaded onto the account. You’ve got to love the iPhone markup… although there must certainly be a justification for the price difference that I’m missing… There are some caveats to […]

January 20, 2012January 20, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Android Developers Conference 2012 (AnDevCon III) Schedule

The full schedule for AnDevCon III (14-17 May 2012) has finally been released with 42 different classes and several workshops. The sessions will be organized into five subject area: Developer Essentials: These technical classes and workshops are for all Android developers and cover all programming topics. Android Enterprise: These technical sessions cover topics specific to building and managing apps for employees, business customers and partners, such as back-end integration corporate data center communications, ERP or CRM systems. Android Business: These classes and workshops are for entrepreneurial developers who want to learn the most effective ways of distributing and selling Android apps, including how to maximize profit through the Android Market. Android Tablets and beyond: These classes and workshops are specific to commercial devices beyond smartphones, including tablets, Google TV, and other platforms. Embedded Android: These classes and workshops are for developers working close to the hardware, such as on custom […]

December 19, 2011December 19, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Using NFC for Bluetooth Pairing

The NFC Forum and the Bluetooth Special Interest Group (SIG) announced the publication of Bluetooth Secure Simple Pairing Using NFC. This new document provides developers with examples of how to implement Bluetooth Secure Simple Pairing (SSP) using NFC to take maximum advantage of both technologies when they are present in the same device. Bluetooth Secure Simple Pairing Using NFC describes the interaction of Bluetooth technology and NFC during SSP in details and provides examples of both negotiated and static handover in the most feasible use cases involving both technologies. Developers will find the examples useful guides for their own work, including: Pairing devices with little or no user interface (such as headsets and pedometers) to smartphones Pairing devices with extensive user interfaces (such as cars) to smartphones Pairing devices such as TVs and smartphones to share photos or to use the phone as a remote control While studying about this […]

November 16, 2011November 16, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Beyond NFC Payment: Other NFC Use Cases

During CarteS event, NXP has uploaded a video on YouTube showing several NFC applications that are not directly used for payment. In the video below, you’ll see several such applications including: Smart Advertizement: shopping advice, movie promotion, travel info and game Smart Meter for meter reading and real-time power consumption monitoring via an Android device e-Passport with NFC Technology for faster immigration procedure. Secure Online Authentication NFC-Enable motorcycle to prevent theft NFC-enabled figurines to interact with video games. Authentication to unlock door, laptop and more. Gesture enabled smart card where you can use gesture to sign your own card and enable/disable it. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

November 8, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Linux NFC Subsystem – ELCE 2011

Lauro Ramos Venancio, Instituto Nokia de Tecnologia and Samuel Ortiz, Intel give a presentation about the NFC subsystem in Linux at Embedded Linux Conference Europe 2011. Abstract: NFC (Near Field Communication) is a wireless protocol mostly designed for fast information reading and writing from nearby devices and tags. It also allows NFC devices to establish a transport layer link and exchange larger chunks of data. While Android ships with its own multi platform NFC stack writing HCI frames to a raw character device and supporting one single device, Linux is currently missing any kind of generic and clean NFC support, from both kernel and user space (cnxsoft: Since end of last month, this is not the case as Linux 3.1 supports NFC). Therefore, a new socket family for NFC, along with a kernel netlink API for high level NFC commands passing is being developed. An NFC user space daemon abstracts […]

October 25, 2011October 25, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linux 3.1 Release

Linux Torvalds announced the release of Linux Kernel 3.1 yesterday: As promised, the kernel summit has started, and Linux-3.1 is out. The (small) shortlog of changes since -rc10 are appended, we have mostly some sparc and networking changes, along with some radeon and intel iommu fixes (mostly for largepages and integrated graphics issues). Most people probably will not notice the changes. One big change from -rc10 is that there are tar-balls and patches, so if you aren’t a git user (why?) you can download it now in a traditional format. On of the things to note is that the files are now signed by my gpg key, and it’s the *uncompressed* version that the signature is for. And of course, this means that the merge window for 3.2 is open. I’ll do some merging during the KS, but probably most when I get back home – but you can still […]