nas News - Page 8 of 17 - CNX Software

January 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

QNAP TS-251D 2-Bay NAS Comes with an Intel Celeron J4005 SoC, HDMI, PCIe Expandability

QNAP has introduced a 2-bay NAS powered by an Intel Celeron J4005 Gemini Lake SoC coupled with 4 GB SO-DIMM DDR4 memory. QNAP TS-251D also offers the option of getting an extra 5 or 10 Gigabit Ethernet port via PCIe card and supports video playback and output thanks to an HDMI 2.0 port. QNAP TS-251D specifications: SoC – Intel Celeron J4005 dual-core Gemini Lake processor @ 2.0 GHz / 2.7 GHz (Burst) with Intel UHD Graphics 600 System Memory – 2x SO-DIMM DDR4 memory slots (8GB max) fitted with 2GB RAM for TS-251D-2G model 4GB RAM for TS-251D-4G model Storage 4GB flash memory with dual boot OS protection Drive Bay – 2x 3.5-inch SATA 6Gb/s slot compatible with both 2.5″ and 3.5″ drives; hot-swappable M.2 SSD slot available via optional QM2 PCIe adapter for SSD cache acceleration Connectivity 1x Gigabit Ethernet Port (RJ45) Optional PCIe adapter with 5-Gbps or 10-Gbps […]

January 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Kobol Helios64 RK3399K SBC & 5-Bay NAS Pre-Orders to Start Next Week

We covered Rockchip RK3399K processor a few months ago, as a version of RK3399 processor qualified to run at 2.0 GHz, or supporting a wider-temperature range (-20 to +85°C) at 1.8 GHz. We found out about the new processor, as Kobol was working on a Helios64 SBC designed for NAS that featured RK3399K SoC. At the time, we just had a drawing of the board and some specifications, but now the company has announced pre-orders for the board and a complete 5-bay NAS kit will start next week and the actual shipping start in March. Kobol Helios64 SBC Specifications: SoC – Rockchip RK3399K hexa-core processor with 2x Arm Cortex-A72 cores @ 2.0 GHz, 4x Cortex-A53 cores @ 1.6 GHz System Memory – 4GB LPDDR4 Storage – 16GB eMMC 5.1 flash, 5x SATA 3.0, 1x M.2 SATA slot shared with one SATA 3.0 port, MicroSD port Connectivity – 1x 2.5GbE port, […]

June 27, 2019June 27, 2019 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi M4 RK3399 SBC Price Drops to $50 and Up

The launch of Raspberry Pi 4 SBC has generated lots of interest, especially with the extra performance and low $35 price tag that has made most alternatives suddenly less interesting. However, Raspberry Pi 4 benchmarks show it’s not quite the fastest board around, and for example, Rockchip RK3399 platforms are still quite faster, sometimes as much as twice as fast. They do cost much more though, often more than twice, and so far one of the cheapest RK3399 boards was NanoPi M4 going for $65. FriendlyELEC has now decided, certainly in response to Raspberry Pi 4 offering, to lower the price to $50 for the 2GB RAM version which compares to $45 with Raspberry Pi 4 2GB, as well as $75 for the 4GB RAM version (was $95). NanoPi M4 specifications: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 @ up […]

May 16, 2019May 16, 2019 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Blueendless X3 Networked “HDD NAS Case” Runs Ubuntu on Marvell ARMADA 3720 SoC

We’ve previously covered inexpensive Kimax’ Ethernet & WiFi HDD enclosures for 2.5″ SATA drives, powered by MediaTek processor and running OpenWrt. If you need something more powerful and versatile yet still affordable, the easiest way is now likely to go with SBC based solutions such as ODROID-HC1/HC2 or dual SATA NAS enclosure for RockPro64. There may be another interesting option, as I’ve just been informed about another model of those networked HDD enclosure called Blueendless X3 “HDD NAS case” with Ethernet only (no WiFi), and that is equipped with the same Marvel ARMADA 3720 dual core Cortex-A53 processor as found in Marvell ESPRESSOBin board. Blueendless X3 specifications: SoC – Marvell ARMADA 3720 (88F3720) dual core Cortex-A53 processor @ up to 1.1 GHz System Memory – 512 MB DDR3 Storage – 16GB eMMC flash for OS, SATA 3.0 interface for 2.5″ drives based on ASMedia ASM1092R port multiplier Networking – 1x […]

April 13, 2019April 29, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Zidoo Z1000 4K Android Media Player to Feature Realtek RTD1296DD Processor

Zidoo previously introduced several Reatek RTD1296 4K Android media players with their high-end Zidoo X20/X20 Pro models, followed by the lower cost Zidoo Z9S & Z10 units. The company is now about to launch yet another model based on the processor with Zidoo Z1000 4K UHD media player that should offer an option between the higher-end models and the company’s entry-level options. Zidoo Z1000 specifications: SoC – Realtek RTD1296DD quad core Cortex A53 processor with Arm Mali-T820 MP3 GPU System Memory – 2 GB RAM Storage – 16 GB eMMC flash, 1x SATA 3.0 bay for 2.5 or 3.5″ drive, 1x external SATA port Video 1x HDMI 2.0a output up to 4K @ 60 Hz with HDR10 support 1x HDMI 2.0 input supporting PiP, stream recording, and UDP broadcasting 1x RCA composite output Decode – HDR10, 10-bit HEVC / H.265 up to 4K @ 60fps, VP9 up to 4K @ […]

February 19, 2019February 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Design your own NAS with $25 4x SATA HAT for NanoPi M4 Board

NanoPi M4 is one of the many Rockchip RK3399 boards available on the market today. The SBC follows Raspberry Pi form factor, comes with 2 to 4 GB RAM, four USB 3.0 ports, Gigabit Etherent, HDMI 2.0, etc.. and exposes the 2-lane PCIe interface from the Rockchip processor not through a typical PCIe slot or mini PCIe slot, but instead through a 2.54mm pitch header. I feel like an odd choice at first glance, but it now makes complete sense, as the company has launched a 4x SATA HAT for NanoPi M4 board that leverages the header with PCIe 2x signals. 4x SATA HAT for NanoPi M4 key features and specifications: PCIe to SATA Chipset – Marvell 88SE9215 four-port 6Gbps SATA I/O controller USB – 2x 4-pin USB 2.0 host connectors Expansion – NanoPi M4 40-pin header exposed Misc Power key, unpopulated power key jumper Power LED, 4x SATA LEDs […]

January 2, 2019April 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

FOSDEM 2019 Open Source Developers Meeting Schedule

FOSDEM – which stands for Free and Open Source Software Developers’ European Meeting – is a free-to-participate event where developers meet on the first week-end of February to discuss open source software & hardware projects. FOSDEM 2019 will take place on February 2 & 3, and the schedule has already been published with 671 speakers scheduled to speak in 711 events themselves sorted in 62 tracks. Like every year, I’ll create a virtual schedule based on some of the sessions most relevant to this blog in tracks such as open hardware, open media, RISC-V, and hardware enablement tracks. February 2 10:30 – 10:55 – VkRunner: a Vulkan shader test tool by Neil Roberts A presentation of VkRunner which is a tool to help test the compiler in your Vulkan driver using simple high-level scripts. Perhaps the largest part of developing a modern graphics driver revolves around getting the compiler to […]

November 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

QNAP HS-453DX Fanless NAS Features Gemini Lake Processor, 10GbE, HDMI 2.0

Intel Gemini Lake processors are usually found in consumer products such as motherboards, mini PCs, tablets, and laptops, but QNAP has just announced a fanless NAS – QNAP HS-453DX – targeting home users, and equipped with an Intel Celeron J4105 Gemini Lake processor, the same chip as found in the recently launched ODROID-H2 SBC. The NAS comes with 4 to 8GB RAM, supports two 3.5″ hard drives, two M.2 SSD, and includes interfaces like HDMI 2.0 outputs and 10Gb Ethernet, making it not only suitable as a high-speed NAS, but also as a 4K media player. Two versions of the NAS are available: QNAP HS-453DX-4G and HS-453DX-8GB only differing by the amount of RAM. Specifications: SoC – Intel Celeron J4105 quad-core processor @ 1.5 GHz / 2.5 GHz with Intel UHD Graphics 600 System Memory – 4 or 8GB via 2x SO-DIMM DDR4 sockets Storage 4GB eMMC flash for firmware […]