motherboard News - Page 10 of 11 - CNX Software

January 19, 2018January 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

ASRock Unveils J4105-ITX & J4105B-ITX Gemini Lake Mini-ITX Motherboards

We’ve already seen several Intel Gemini Lake mini PCs at CES 2018 from companies such as ZOTAC, MeLE or ECS, but if we exclude LattePanda Delta development board, I had not seen any motherboards with the latest low power Intel processors. But today I found out ASRock had listed at least two Gemini Lake mini-ITX motherboards on their website, namely J4105-ITX & J4105B-ITX, both powered by an Intel Celeron J4105 quad core Desktop processor. Both motherboards have similar specifications, except for some connectors and features: SoC – Intel Celeron J4105 quad core processor @ 1.50/2.5 GHz with 12EU Intel UHD Graphics 600 up to 750 MHz; 10W TDP System Memory – 2x DDR4-2400/2100 SO-DIMM slots up to 8GB (2GB per module not supported) Storage 2x SATA3 6.0 Gb/s connectors, support NCQ, AHCI and Hot Plug 128Mb NOR flash for AMI UEFI BIOS with GUI support J4105-ITX only – 2x SATA3 6.0 Gb/s […]

January 2, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

PICO-APL3 Apollo Lake Pico-ITX Board Comes with an Optional TPM 2.0 Module

AAEON has launched another industrial Pico-ITX board powered by Intel Celeron/Pentium Apollo Lake processors with their PICO-APL3 Pico-ITX single board computer featuring either Celeron N3350 or Pentium N4200 processor together with 2 to 4GB soldered DDR3L memory, and 16 to 64 GB eMMC flash. The company explains that one of key differences against other similar board is the option for a TPM module / hardware security that would allow applications such as payment processing for retailers or on the go. AAEON PICO-APL3 board specifications: SoC Intel Celeron N3350 dual core Apollo Lake processor @ up to 1.10/2.40GHz with 12EU Intel HD Graphics 500; 6W TDP Intel Pentium N4200 quad core Apollo Lake processor @ up to 1.10/2.50GHz with 18 EU Intel HD Graphics 505; 6W TDP System Memory – 2GB DDR3L on-board (Option to 4GB) Storage – 16GB eMMC flash (32/64 GB as option), 1x SATA III port (5V/12V power), […]

December 4, 2017April 14, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Top 5 Most Powerful Arm SBCs & Development Boards in 2017 / Early 2018

Raspberry Pi, Orange Pi, and NanoPi boards among others are all great and inexpensive Arm Linux development boards that do good enough job for many tasks, but they may not cut it if you have higher requirements either in terms of CPU power, GPU capabilities and performance, I/O bandwidth, and in some cases software and support. So I’ve decided to make a list of 5 single board computers or development boards that I consider to be the most powerful in 2017, early 2018. I have limited the price to $1,000 maximum, the board must be easy to purchase for most people (e.g. you don’t need to be a tier-1 automotive supplier, or operate your own datacenter), and in case the board is not quite available yet, the likeliness of actual launch must be reasonably high. Those criteria for example exclude Intrinsyc Open-Q 835 development kit since it costs $1.149 and […]

November 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Colorful C.J1900A-BTX Plus V20 Bay Trail Motherboard Takes 8 Graphics Cards for Cryptocurrency Mining

Intel Bay Trail processors are mostly found in tablets, 2-in-1 hybrid laptops, and mini PCs, and they’ve often give placed to Cherry Trail processors, and in some cases Apollo Lake ones. x86 compatibility, low cost and low power are the main selling points of the Bay Trail processor family. Colorful has found a different use case, as they designed a motherboard with 9 PCIe x16 slots, one for a card powered by an Intel Celeron J1900 processor, and 8 to add graphics card in order to mine cryptocurrencies. The blue PCI slot takes a PCI CPU card with an the following specifications: SoC – Intel BayTrail J1900 quad core processor @ up to 2.42 GHz with 2M Cache, integrated Intel HD graphics; 10W TDP Memory – 1×DDR3L SO-DIMM, DDR3L 1333MHz/1066MHz Storage – 1x mSATA slot, 1x SATA 3.0 connector, 1x 4-pin SATA connector Video Output – HDMI Connectivity – Dual […]

October 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

CHUWI LapBook 14.1 Laptop Manufacturing Changes – Hardware at Launch vs Several Months Later

Products may evolve over time due to parts becoming phased out (EOL), so company often issues PCN (product change notices) to the company for example to replace eMMC flash that’s not manufactured anymore by a new one. They won’t change any advertised features, so the product specifications should remain the same. Reviewers normally get product from one of the first batch of production, and if you purchase the product a few months later, after carefully reading reviews, you may end up with a device slightly different. But in some cases, the company makes major changes, while still delivering the same advertised hardware specifications. That’s apparently the case for CHUWI LapBook 14.1 laptop. The photo below shows how it looked internally for the sample I reviewed. If you zoom on the photo, you’ll find an M.2 slot on the bottom of the right PCB, potentially allowing you to add an SSD […]

July 5, 2017July 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Supermicro A2SDi-2C-HLN4F Server Mini-ITX Motherboard is Based on Intel Atom C3338 “Denverton” Processor

Almost exactly one year ago, I wrote about Intel Atom C3000 Series “Denverton” processor based on the same Goldmont architecture used in Apollo Lake processor, and used in an early GIGABYTE MA10-ST0 server motherboard prototype. The latter is not out yet, but according to a YouTube video, the 16-core motherboard should be launched in H2 2017. In the meantime, Supermicro also made their own Denverton motherboard based on a lower-end Atom C3338 dual core processor. Supermicro A2SDi-2C-HLN4F board specifications: Processor – Intel Atom C3338 dual core Denverton processor @ 1.50 / 2.20 GHz with 4 MB cache; 9W TDP System Memory Up to 64GB Register DIMM RDIMM and DDR4-1866MHz Up to 32GB Unbuffered ECC/non-ECC UDIMM, DDR4-1866MHz, in 2 DIMM slots Storage – 4x SATA 3 ports, but up to 8x SATA 3 (6 Gbps) ports are configurable; N.B.: total combined PCI-E lanes and SATA ports is up to 8 Connectivity […]

April 18, 2017April 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

GIGABYTE GA-J3455N-D3H Apollo Lake Mini-ITX Motherboard Comes with 2x Gigabit Ethernet Interfaces, 4x SATA Ports

GIGABYTE has introduced an update to Bay Trail based GA-J1900-D3V and Braswell based GA-N3150N-D3V motherboards with the launch of GIGABYTE GA-J3455N-D3H mini-ITX motherboard powered by an Intel Celeron J3455 Apollo Lake processor, and equipped with two Gigabit Ethernet ports, four SATA interfaces, and support for up to 16GB RAM. GA-J3455N-D3H specifications: SoC – Intel Celeron J3455 quad core processor @ 1.50 / 2.3 GHz with 12EU Intel HD Graphics 500, 2 MB Cache; 10W TDP System Memory – 2x DDR3L SO-DIMM sockets supporting up to 16 GB RAM; Dual channel; DDR3L 1866/1600/1333 MHz non-ECC memory modules supported Storage 2x SATA 6Gb/s connectors (SATA3 0 & 1) via SoC, 2x SATA 6Gb/s connectors (SATA3 2 & 3) via ASMedia ASM1061 chip 1x 64 Mbit flash for licensed AMI UEFI BIOS with PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Video Output 1x D-Sub port (VGA) supporting a maximum […]

March 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

$100 Qotom Q1900G4-M Nano-ITX Board Powered by Intel Celeron J1900 SoC is Equipped with Four Gigabit Ethernet Ports

Qotom Q1900G4-M is a motherboard designed for networking applications thanks to four Gigabit Ethernet ports connected to an Intel Celeron J1900 quad core “Bay Trail” processor. The board supports up to 8GB DDR3 RAM via a SO-DIMM slot, storage through a SATA port and an mSATA connector, and WiFi or cellular connectivity through a mini PCIe slot and SIM card slot. Qotom Q1900G4-M board specifications: SoC – Intel Celeron J1900 quad core “Bay Trail” processor @ 2.0 GHz / 2.41 GHz (Burst) with Intel HD graphics (10W TDP) System Memory – 1x SO-DIMM sockets for up to 8GB DDR3 memory Storage – 1x SATA 3.0 port + power (14 & 15), 1x mini PCIe connector for mSATA SSD (16) Video Output – VGA (5) Connectivity 4x Gigabit Ethernet ports (3) with Wake-on-LAN support SIM card socket (17) USB only mini PCIe connector for WiFi, 3G or 4G (18) USB – 3x […]