module News - Page 14 of 17 - CNX Software

September 9, 2021September 15, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

LILYGO T-32C3 – A small ESP32-C3 WiFi & BLE IoT module with 4MB flash

We’re slowly starting to see more hardware-based on ESP32-C3 RISC-V processor, and LILYGO T-32C3 is a compact module based on the WiFi & Bluetooth LE processor that includes 4MB flash and a PCB antenna. I’d expect T-32C3 to be eventually found in the company’s smartwatches and development boards, and it joins other ESP32-C3 modules from AI Thinker. LILYGO T-32C3 module specifications: SoC – Espressif ESP32-C3 RISC-V processor @ 160 MHz with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, 2.4 GHz WiFi 4, Bluetooth 5.0 LE & Mesh Storage – 4MB flash On-board PCB antenna I/Os – 22x castellated holes with GPIO, 3x ADC, SPI, UART, I2C, Boot, Reset, 5V, 3.3V, GND Dimensions – 23 x 11 x 3.5 mm (4-layer PCB) Note the USB interface is not listed in the specs, but USB DN and DP signals are located on GPIO18 and GPIO19 so USB should also be […]

September 3, 2021October 8, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

M5Stamp Pico ESP32-PICO-D4 module ships with a heat-resistant plastic shell

Most WiFi IoT modules are designed to be integrated into products with an enclosure, but the M5Stamp Pico module based on ESP32-PICO-D4 SiP comes with a removable heat-resistant plastic shell that protects the 3D antenna and components, while leaving space to solder headers and/or a Grove connector. The tiny module also comes with a button and RGB LED, and like other ESP32-based M5Stack hardware, M5Stamp Pico is programmable with UIFlow graphical programming platform and compatible with Arduino, MicroPython, and the ESP-IDF. M5Stamp Pico specifications: System-in-Package – Espressif Systems ESP32-PICO-D4 SiP with dual-core processor @ 240MHz, 520KB SRAM, 4MB flash, and 2.4 GHz Wi-Fi 4 up to 150 Mbps and Bluetooth 4.2 BR/LE connectivity Antenna – 2.4 GHz 3D antenna I/Os – 2.54mm pitch header with ADC, DAC, touch sensor, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, PWM, UART, I2C, I2S, IR remote controller, up to 12x GPIO, pulse counter […]

August 24, 2021September 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Coin cell-powered OpenThread sensor board can send data every 20 seconds for three years

Monkey Store’s Thread Sensor Tag is a pressure, humidity, temperature, and light sensor that connects to the OpenThread network, and is capable of transmitting MQTT/UDP data every 20 seconds over a period of around three years from a single coin cell battery. As a reminder, OpenThread is an implementation of the Thread IoT network protocol that was unveiled in 2016 by Nest Labs (now Google/Alphabet). This has not been widely used so far, but we did write about MKR SharkyPro development board with OpenThread support via STMicro STM32WB5MMG wireless module earlier this year, and Monkey Store is telling us both Google and Apple are working on devices with support for the IoT protocol. Thread Sensor Tag specifications: Wireless module – Minew MS88SF2 based on Nordic Semi nRF52840 multi-protocol 2.4GHz wireless Cortex-M4 microcontroller Sensor VEMLS6030 I2C light sensor MS8607 pressure, humidity, and temperature sensor I/Os – 7x through holes with Tx/Rx, […]

August 17, 2021August 17, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Offline speech recognition MCU module comes with speaker, microphone, and UART connectors

We found out about Unisound US516P6 RISC microcontroller inside an offline voice assistant module last May. The module offers offline speech recognition for just $2 to $4, with good performance, and excellent privacy since no cloud service nor Internet connection is needed. That module requires some soldering, but if you’d prefer something easier to connect the “SU-10A” offline speech recognition MCU module comes with connectors for a speaker, a microphone, as well as UART connectivity to a host MCU if needed. “SU-10A” module specifications: MCU – Unisound US516P6 RISC microcontroller @ 240 MHz with FPU, DSP instruction, FFT accelerator, 242KB SRAM, 2MB flash Audio Built-in 3W mono Class AB power amplifier. 2mm pitch connector for speaker (4 Ohms up to 2.9W, 8 Ohms up to 1.8W) 2mm pitch connector for electret microphone Debugging/programming – UART port for serial console (5V or 3.3V supported) Host interface – 2mm pitch 4-pin connector […]

August 5, 2021September 26, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

BL-63B – A smaller BL602 IoT module that sells for $1.5

Bouffalo Labs BL602 is a low-cost, low-power RISC-V microcontroller that offers 2.4 GHz WiFi and Bluetooth 5.0 LE connectivity for IoT projects for about the price of ESP8266. We first discovered it last year, together with a development board. Pine64 created its own PineCone board fitted with the $2 PineNut module, and some reverse-engineering work has started on BL602 SDK. But there’s now another smaller BL602 module with “Machine Intelligence” (that’s the company name) BL-63B that sells for $1.5 on Taobao in China, as well as on LCSC Electronics albeit you’d need to purchase 1000 pieces to get that price, and single-unit pricing is currently $2.5. BL-63B WiFI & BLE module specifications: SoC – Bouffalo Labs BL602 32-bit RISC-V processor @ up to 192 Mhz with 276KB RAM, 128KB ROM, 1Kbit eFuse, WiFi and BLE Storage – 2MB flash Wireless 2.4GHz 802.11b/g/n WiFI 4 1×1 SISO up to 65 Mbps […]

August 3, 2021August 3, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Express-TL Tiger Lake-H COM Express module offers 8K video, PCIe Gen4 x16 connectivity

We just noticed some Intel Tiger Lake-H Xeon/Core/Celeron processors for embedded systems last week, and at the time it was not clear when they’d be announced and/or become available. It turns out it did not take long, as ADLINK has just unveiled their TL-Express COM Express Basic Size Type 6 module with the new processors. The new computer-on-module offers a more powerful alternative to the company’s cExpress-TL Tiger Lake UP3 COM Express Compact module, with up to 8 cores/16 threads, 128 GB memory, 8K video output, support for -40°C – 85°C industrial temperature range, and the company also claims it is the first COM Express module to support PCI Express Gen 4 x16, doubling the bandwidth of previous COM Express modules in the market. Express-TL COM Express Compact 6 CPU module specifications: Tiger Lake-H Embedded SoC (one or the other) Intel Celeron 6600HE dual-core processor @ 2.6GHz with 8MB L3 […]

July 16, 2021July 16, 2021 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

$6 RAK3172 WisDuo LoRaWAN module features STMicro STM32WL LoRa SoC

RAK3172 WisDuo is a LoRaWAN module smaller than most coins with 15.5×15 mm dimensions made possible thanks to STMicro STM32WL Cortex-M4 LoRa SoC, which we previously found in Seeed Studio’s $10 LoRa-E5 module and corresponding development boards. But while Seeed Studio relies on STM32WLE5JC SoC with 256KB flash and 64KB RAM in a 73-pin UFBGA package, RAKwireless RAK3172 Wisduo is powered by STM32WLE5CC with the same amount of memory or storage, but in a 48-pin UFQFPN package, and an even lower price at just $5.99 in single units. RAK3172 Wisduo specifications: SoC – STMicro STM32WLE5CC55 Arm Cortex‐M4 MCU @ 48 MHz with 256 KB flash memory with ECC, 64 KB RAM, and a sub-GHz radio based on Semtech SX126x LoRaWAN 1.0.3 specification compliant Supported bands – EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, and AS923 LoRaWAN Activation by OTAA/ABP LoRa Point to Point (P2P) communication Range – Greater than […]

July 6, 2021July 6, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

RAKwireless announces 14 new WisBlock modules for IoT prototyping

Rakwireless has added 14 new Wisblock modules to the WisBlock IoT modular system introduced last year, plans to soon release a Raspberry Pi RP2040 based LoRaWAN Wisblock Core module, and will give away some Wisblock starter kits this week. As a reminder WisBlock IoT modular system is comprised of four block types: WisBlock Base – A carrier board with connectors for other block types, power supply, some ports WisBlock Core – Module with a microcontroller/processor WisBlock Sensor – Modules with environmental sensors, motion sensors, ambient light sensors, or others WisBlock IO – Adds more inputs, outputs, or connectivity options including LTE-M / NB-IoT, cellular and Wi-Fi modules, NFC reader, and interfaces for I2C, UART, ADC, and GPIO. New WisBlock IO and Sensor modules Some modules are available right now, while others have been announced, but just coming soon Here’s a list of the 10 modules available now: RAK12002 – RTC […]