mitac

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on MiTAC introduces Intel Elkhart Lake & Comet Lake thin Mini-ITX motherboards

MiTAC introduces Intel Elkhart Lake & Comet Lake thin Mini-ITX motherboards

Comet Lake Thin-mini ITX motherboard

MiTAC has unveiled three industrial thin mini-ITX motherboards based on Elkhart Lake and Comet Lake processors with respectively MiTAC PD10EHI with a choice of low-power Intel Atom, Celeron and Pentium Elkhart Lake processors, and two more powerful motherboards with MiTAC PH11CMI & PH12CMI based on up to an Intel Core i9 Comet Lake processor, and which are virtually identical except for a different chipset allowing vPro features and RAID support. MiTAC PD10EHI Elkart Lake thin mini-ITX motherboard Specifications: Elkhart Lake SoC (one or the other) Intel Atom x6413E quad-core processor @ 1.5 GHz / 3.0 GHz (Turbo) with 16EU Intel UHD graphics; 9W TDP Intel Celeron N6210 dual-core processor @ 1.2 GHz / 2.6 GHz with 16EU Intel UHD graphics; 6.5W TDP Intel Celeron N6211 dual-core processor @ 1.2 GHz / 3.0 GHz with 16EU Intel UHD graphics; 6.5W TDP Intel Celeron J6413 quad-core processor @ 1.8 GHz / 3.0 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Fanless Linux embedded system makes a compact IoT gateway

Fanless Linux embedded system makes a compact IoT gateway

Mitac ME1-108T Linux imx8mm embedded system

ICP Germany has recently introduced the MiTAC ME1-8MD series family of compact, fanless Linux embedded systems powered by NXP i.MX 8M processor and designed to be used as IoT gateways, data acquisition and processing systems, and mini servers. Three models have been launched with a choice of dual or quad-core processors, up to 4GB LPDDR4 RAM, and 32GB eMMC flash storage. The embedded computers also come with up to two Ethernet ports, support up to two displays, and include an internal Raspberry Pi compatible 40 pin GPIO header. MiTAC ME1-8MD specifications and key features: SoC – NXP i.MX 8M Dual or Quad with two or four Cortex-A53 @ 1.3GHz, Cortex-M4 MCU, Vivante GC7000 Lite GPU, and 4K video processing unit System Memory – 1 to 4GB LPDDR4 800 Mhz RAM Storage – 8, 16, or 32GB eMMC flash, 1x MicroSD card slot up to 256GB Video Output HDMI 2.0 Optional […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Intel Elkhart Lake Processors To Succeed Gemini Lake Processors in 2020

Intel Elkhart Lake Processors To Succeed Gemini Lake Processors in 2020

Intel Elkhart Lake Tablet

Intel Gemini Lake processors were highly anticipated as soon as they were first reported in September 2016, and even more so before launch since Gemini Lake products promised to be about as expensive as their older Apollo Lake counterparts. Interest somewhat fizzled despite a clear performance advantage over the previous generation, as prices did not match initial expectations, likely due to a shortage of Intel cheaper processors. In recent weeks, we started to read about Intel Elkhart Lake processors that are meant to be the successors of Gemini Lake processors, based on Tremont microarchitecture, and featuring Intel “i915” Gen11 graphics. The new processor should be manufactured using a 10nm process, but it’s still unclear whether some Elkhart Lake processors will be part of Intel Foveros which combines a fast Sunny Cove core with several Atom class Tremont cores. That’s about all we know from the technical side so far. A […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on MiTAC Announces 7-Star 64-Bit ARM Server Powered by Applied Micro X-Gene Server-on-Chip

MiTAC Announces 7-Star 64-Bit ARM Server Powered by Applied Micro X-Gene Server-on-Chip

After unveiling their GFX servers based on Marvell ARM Cortex A9 SoC at Computex 2012, Mitac announced their new 7-Star server at Computex 2013. This new server is based on Applied Micro X-Gene SoC featuring ARMv8 architecture, and is one of the first, if not the first, 64-Bit ARM server ever. The key features of Mitac Server are as follows: 18x Front-loaded Computing Blades in 4U (176mm x 440mm x 650mm) Server Blade Spec SSI uModule v1.0 complaint (1) ARMv8 compliant 64-bit SoC /blade (2) DDR3 DIMM slots, and (2) 2.5” SATA 3.0 HDD support (1) 10G SFP+ and (1) GbE port IPMI V2.0 compliant Pass-through Ethernet Module Chassis Management Hot-swap FAN and (2+1) RPSU support It will be available by the end of the year. That’s about all I know for now, but more information should eventually come up on Mitac 7-Star page. Via PC Perspective. Jean-Luc Aufranc (CNXSoft)Jean-Luc […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Mitac Unveils ARM Based GFX Server at Computex 2012

Mitac Unveils ARM Based GFX Server at Computex 2012

MiTAC International announced their first ARM server (MiTAC GFX) based on Marvell ARMADA XP SoC and running Ubuntu 12.04 LTS at Computex 2012, in Taipei. This solution appears to be similar to Dell “Copper” ARM server announced last week, which also uses Marvel ARMADA XP and runs Ubuntu 12.04, except its intended to be a real product rather than just a prototype. The MiTAC GFX with ASX-1 module is intended for deployment as a general purpose server where real estate, efficiency and throughput at a realistic price are key factors and typical applications include web hosting, web browsing, email, chat, social media and networking, etc. Later,  MiTAC will introduce an ASX-HP (High Performance) module for compute intensive workloads that can be add to GFX system, and ASX modules featuring 64-bit SoC are under development. MiTAC showcased a GFX System with 64 nodes (that’s 256 Cortex A9 cores) at Computex 2012, […]

Exit mobile version
EmbeddedTS embedded systems design