mini pc News - Page 87 of 145 - CNX Software

July 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Review of Vorke V1 mini PC Powered by Intel Celeron J3160 Processor

After checking out Vorke V1 mini PC hardware in the first part of the review, it’s now time to publish the review starting with system information, benchmarks, and user testing. The device competes with similarly priced devices based on Intel Atom x7 processor such as Voyo V3 and Beelink BT7, so I’ll also include some comparisons to those in the review. Setup and System Information I connected USB keyboard and mouse, an Ethernet cable, HDMI and VGA cables to check dual display support, as well as the power supply. I did not connect my USB 3.0 hard drive since, I’ve already fitted the mini PC with an internal 1TB hard drive. Pressing on the large power button on the top of the device will boot it, and after a few seconds, you’ll get to go through Windows 10 setup by first accepting the EULA. The next steps are Custom or […]

July 1, 2016July 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Stress Testing Windows mini PCs with OCCT Overclock Checking Tool

I’m mostly a Linux user, but the marketplace has chosen Windows 10 as its preferred operating systems for mini PCs, so I’ve been reviewing fanless (or not) mini PCs running Windows 10 for around two years since Intel decided to provide low cost and low power processors. I normally run some benchmarks such as PCMark 8 or 3DMark, as well as typical user tasks, while monitoring CPU temperature and throttling using HWInfo64 utility, but those benchmarks are not really pushing the device to its limits. However, I’ve just learned out about OCCT “Overclock Checking Tool” that’s just doing that, and installed OCCT 4.4.2 on Vorke V1 to check it out. The tool has four taps: CPU: OCCT, CPU: Linpack, GPU: 3D, and Power Supply to stress test different part of the system. I just let it run for over 3 hours after pressing the ON buttons, and you can see […]

June 30, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Open Source, Modular and Upgradeable EOMA68 CPU Card, Laptop and Micro Desktop Launched (Crowdfunding)

Rhombus Tech has been working on EOMA68 standard for CPU modules based on PCMCIA at least since 2012, and after previous difficulties, they showcased a laptop prototype taking OEMA68 CPU cards at the beginning of the year, and they’ve now launched a CrowdSupply campaign selling an EOMA68 CPU card based on Allwinner A20 processor, as well as corresponding laptop and micro desktop housings that are both open source, and upgradeable with faster EOMA68 CPU card once/if they become available. Current EOMA68 CPU card specifications: SoC – Allwinner A20 dual core ARM Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 2GB RAM Storage – 8GB NAND flash + micro SD slot Video Output – micro HDMI Interface (for 2nd monitor) USB – micro USB OTG port Compliant with EOMA68 standard Two versions of the CPU card are offered with different pre-installed firmware: “Libre Tea Computer Card” […]

June 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Diginnos Docking Station Adds USB Ports and Ethernet to HDMI TV Sticks

Android, Windows, and/or Linux based HDMI TV sticks are great, except they usually come with few USB ports, and lack wired connectivity. A couple of years ago, Measy created a dock adding USB ports and an SD card slot with their Measy U2C Android TV box mostly to allow user to used the built-in camera, but a Japanese company has now released another docking station for TV sticks adding USB ports and Ethernet. Diginnos DG-STKLC docking station specifications: Video output – HDMI Connectivity – 10/100M Ethernet port (RJ45) USB – 3x USB 2.0 ports, 1x micro USB port for power Misc – Integrated cables to connect to TV stick micro’s USB power port, USB host port, and HDMI Power Supply – 5V via micro USB port Dimensions – 128 x 60 x 57 mm Weight – 157grams The docking station has been designed to work with Diginnos own TV sticks, but […]

June 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Dreamcade Replay is a Retro Gaming Console Powered by Intel Braswell or Cherry Trail Processor (Crowdfunding)

If you are old enough to have played with Sega or Atari game console, and feel nostalgic about playing retro games, Dream Arcades Inc. plans to launch a vintage gaming console powered by Intel Braswell or Cherry Trail processor, running Windows 10 and preloaded with licensed retro games such as Pacman, Asteroids, Canyon Bomber, Slot Machine, Warlords, and many other. The console also has Sega/Atari ports to be used with your old game controllers. Three main products will be offered: Wireless Arcade Controller, Replay Classic game console, and Replay Mobile arcade machine, with the last two using the same hardware with the following preliminary specifications: SoC – Intel Atom x7-Z8700 Cherry Trail quad core processor, or Intel Celeron J3160 (or other) Braswell quad core processor with Intel HD graphics System Memory – 4GB Storage – 64GB eMMC flash + micro SD and SD slots Video Output – HDMI Display (Arcade […]

June 23, 2016June 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TVPRO HD6 is an Intel Bay Trail mini PC Designed for Video Conference

Intel Atom Z3735F processor has been one of the most popular low power Intel Atom processor, and has been found in tablets, mini PCs, TV sticks running Windows, Android or Linux operating systems. TVPRO HD6 is still marketed as a mini PC, but the form factor is a little different as it includes a high-definition camera, and has been designed to be placed on top of the television to be used as a video conferencing system with Skype, Google Hangout, or other similar applications. TVPRO HD6 specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz / 1.83 GHz with Intel HD graphics System Memory – 2 GB DDR3 Storage – 32 GB eMMC flash + micro SD card slot up to 128GB Video Output – 2x HDMI output Audio – 2x HDMI, 3.5mm headphone jack, 3.5mm microphone jack, dual microphone up to 5 meters range, […]

June 20, 2016July 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Partaker B4 Intel Celeron N3150 Barebone mini PC Sells for $131

This week-end I received Vorke V1 mini PC powered by Intel Celeron J3160 processor, and with upgradable memory, storage and WiFi as explaining in the first part of the review, and with a $160 price tag after coupon I found it to be pretty good value (Normal price is $200). But still, one person commented that it was too expensive, while another mentioned that some people may prefer to buy extra components such as SO-DIMM RAM, mSATA SSD, and wireless modules locally in order to benefit from a local warranty. So I went on aliexpress to find barebone mini PCs based on Intel Celeron J3160 processor, and I had no luck probably because the processor is relatively recent, so I refocused my search on Intel Celeron N3150 processor which has roughly the same performance, and the one of the cheapest options I could find was Partaker B4 mini PC selling […]

June 18, 2016July 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Vorke V1 Braswell mini PC Unboxing and Teardown

Vorke V1 is a Braswell mini PC pre-loaded with Windows 10, powered by an Intel Celeron J3160 quad core with 4GB RAM, 64 GB internal storage, and two important features if you want to use it as a desktop PC: support for internal 2.5″ hard drive, and dual display support via HDMI and VGA ports. GeekBuying sent me a sample for review, and I’ll do a two part review, starting with pictures of the device, and its internal, before publishing the second part testing the performance, stability and features of the mini PC. Vorke V1 Unboxing There’s not much to say about the package, as it’s just a bland carton box with a sticker with Vorke V1 name, processor and memory info. The mini PC ships with a 19V/2.1A power supply and a power cord, as well as a mounting bracket and 5 screws for 2.5″ SATA SSD or HDD. […]