marshmallow News - Page 10 of 14 - CNX Software

August 1, 2016August 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

QINTAIX Q912 Android TV Box is Powered by Amlogic S912 Octa-core SoC

I published pictures of Amlogic S912 TV box boards just over a month ago, and it appears companies have started to take orders from resellers for Amlogic S912 TV boxes with products such Videostrong KM8 Pro, or the one I’m going to cover in this post: QINTAIX Q912. QINTAIX Q912 specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 8GB or 16GB eMMC flash + micro SD slot Video Output – HDMI 2.0 and AV ports Audio Output – HDMI, AV, and optical S/PDIF Video codecs – VP9 profile 2 up to 4K @ 60 fps, H.265 MP-10@L5.1 up to 4K 60fps, H.264 AVC up to 4K @ 30 fps, H.264 MVC up to 1080p60, MPEG-4, WMV/VC-1 SP/MP/AP, AVS-P16(AVS+)/AVS-P2 JiZhun Profile, MPEG-2 MP/HL, MPEG-1 MP/HL, and RealVIDEO 8/9/10 all up to […]

July 31, 2016January 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Amlogic S905 vs S905X Benchmarks Comparison

We’ve already compared the main features between Amlogic S905, Amlogic S905X and Amlogic S912, with Amlogic S905X being an upgrade of Amlogic S905 with the same quad core Cortex A53 cores and Mali-450MP GPU but adding VP9 hard ware decoding, HDR support, and integrating 10/100 Ethernet PHY and audio codec to lower the cost. The CPU frequency was also said to be lowered to 1.5 GHz in early document, but TV manufacturers keep promoting Amlogic S905 as a 2.0 GHz processor, and I noticed CPU-Z and Antutu also reported the maximum frequency to be 2.02 GHz. In that case the performance should be about the same for both processors. Let’s find out by comparing benchmark results between Amlogic S905 based MINIX NEO U1 (Android 5.1) and Amlogic S905X powered MINI M8S II (Android 6.0) using Antutu 6.x, Vellamo 3.x, and 3DMark Ice Storm Extreme 1.2. A ratio greater than one […]

July 30, 2016February 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 174 Comments

Mini M8S II TV Box (Amlogic S905X) Review – Part 2: Android 6.0 Firmware

Mini M8S II is one of the first Amlogic S905X TV box to hit the market, with the new processor adding 4K VP9 hardware video decoding and HDR support compared to Amlogic S905 processor. I’ve already taken pictures of the device and torn it apart to check its hardware & thermal design in the first part of the review, and in the second part, I’ll boot it up, check performance, features, and video playback capabilities. First Boot, Settings and First Impressions I plugged-in a USB hard drive into one USB port, but since the device only fetures two ports, I had to use a USB hub to connect two RF dongles for MINIX NEO A2 Lite air mouse, and Tronsmart Mars G01 gamepad, as well as a USB keyboard to take screenshots. I completed the hardware setup by connecting HDMI & Ethernet cables before starting the device by connected the […]

July 27, 2016July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Jiayu S3 and S3 Plus Smartphones Get Android 6.0 Firmware Releases with Source Code

Jiayu S3 and S3 Plus are your typical Android smartphones powered by Mediatek MT6752/MT6753 octa core Cortex A53 processor with 3GB RAM, 16GB flash, and a 5.5″ touch screen display. The news here is that Jiayu Germany (a reseller, not the manufacturer), and Team M.A.D (Mediatek Android Developers) comprised of XDA members, have releasing three custom ROMs based on Android 6.0.1 for the smartphone: Cyanogenmod13, Paranoid Android (AOSPA) and AICP (Android Ice Cold Project), which contrast with my Iocean MT6752 smartphone still stuck on Android 4.4.4. I’ll reproduce the technical specifications of Jiayu S3+ phone for reference: SoC- Mediatek MT6753 Octa-core 64-bit ARM Cortex A53 processor @ 1.3 GHz, with ARM Mali-T720 GPU System Memory – 3GB RAM Storage – 16 GB eMMC + micro SD slot up to 64GB Display – 5.5” IPS capacitive touchscreen display; 1920×1080 resolution Connectivity – 802.11 b/g/n/ac Wi-Fi , Bluetooth 4.0, GPS / A-GPS, FM Radio Cellular […]

July 22, 2016August 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

NEXBOX A95X (S905X) Android TV Box Review – Part 1: Unboxing and Teardown

NEXBOX A95X is an Android TV box that first launched with Amlogic S905 processor, the company thought it was a good idea to make multiple models with the same name with a combination of memory capacity (1 or 2GB), storage capacity (8 or 16GB), and even processor, as you may get a box with Amlogic S905, or Amlogic S905X processor adding 4K VP9 and HDR support. So you should be careful befoire your place an order, and check you got the right model when you receive it. The company now sent me their “high-end” A95X Android 6.0 model with Amlogic S905X processor, 2GB RAM, and 16GB storage, as well as Fast Ethernet and dual band WiFi 802.11 b/g/n support. In the first part of the review I’ll check out the hardware, including the board itself, before testing the firmware in more details in the second part. NEXBOX A95X Unboxing The […]

July 18, 2016July 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

MXQ Pro (G9CX) Android 6.0 TV Box Review – Part 1: Specs, Unboxing and Teardown

Most people probably don’t know Shenzhen Shiningworth Technology, but if you’ve ever bought a low cost Android TV box, it may have been made by them. Companies such as Eny Technology, Acemax, Shenzhen Tomato and other are relying on Shenzhen Shiningworth for some of their products, including the popular MXQ series (although other companies are also using MXQ “brand”), and in the past I often found their MAC address in products I reviewed. But this time, the company decided to send their latest product for review directly with MXQ Pro G9CX. I’ll write a two part review starting with specs and pictures, before testing the firmware and providing the second part of the review in a few weeks. G9CX Specifications Let’s start with the technical specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU up to 750MHz+ System Memory – 1GB DDR3 […]

July 13, 2016July 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 52 Comments

Mini M8S II TV Box (Amlogic S905X) Review – Part 1: Unboxing and Teardown

Amlogic S905X powered TV boxes have now hit the market, and compared to existing Amlogic S905 devices add VP9, and provided your TV can handle it, HDR (High Dynamic Range) support. GearBest sent me one of the cheapest S905X TV Box with Mini M8S II, and in the first part of the review, I’ll take some picture of the device, and tear it down, while the second part will be posted later, and focus on testing the firmware. MINI M8S II Unboxing The package was slightly damaged, but nothing to bad. The top reads “Mini TV Box” with some icons describing the main feaures like 4K & H.265/HEVC support, WiFi, and so on. I’ve recently realized that logos and trademarks may cause problems with customs in some countries, and the package does have several potentially problematic trademarks like HBO and Netflix, as well as logos for Twitter, Facebook, Yahoo…. In […]

July 12, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

BPI-M64 Development Board is the first 64-bit Banana Pi Board

Sinovoip has gone on the Allwinner A64 and 64-bit ARM bandwagon, announcing a Pine A64+ competitor, with Banana Pi BPI-M64 (or just Banana Pi M64) with 2GB RAM, 8GB eMMC flash, Gigabit Ethernet, and more. Banana Pi BPI-M64 board specifications: SoC – Allwinner A64 quad core ARM Cortex A53 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC flash (16, 32 and 64GB options), micro SD slot up to 256 GB Video Output / Display interface – HDMI 1.4 up to 4K resolution @ 30 Hz, MIPI DSI interface Audio – HDMI, 3.5 mm headphone jack, built-in microphone Connectivity – Gigabit Ethernet + 802.11 b/g/n WiFi & Bluetooth 4.0 (AP6212) USB – 2x USB 2.0 host ports, 1x micro USB OTG port Camera – MIPI CSI interface (which I guess you support parallel cameras via some kind of bridge) Security – Hardware security […]