lpwan

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Elecrow LR1262 development board combines Raspberry Pi RP2040, SX1262 LoRaWAN module, and 1.8-inch LCD

Elecrow LR1262 development board combines Raspberry Pi RP2040, SX1262 LoRaWAN module, and 1.8-inch LCD

LoRaWAN LR1262 Raspberry Pi RP2040 Development Board

Elecrow LR1262 development board combines a Raspberry Pi RP2040 microcontroller with the company’s LR1262 LoRaWAN module based on STM32WL LoRa SoC with support for 868 and 915 MHz frequency bands, and a 1.8-inch LCD. The board also offers an RS485 terminal block to connect sensors and actuators, plenty of connectors and headers for further expansion, several buttons for user control, and LEDs for debugging/monitoring. Elecrow LR1262 development board specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex-M0+ @ 133MHz built-in 264KB SRAM Storage – 4MB flash Display – 1.8-inch 128×160 TFT LCD using ST7735S 4-wire SPI driver Wireless – Elecrow LR1262 LoRaWAN module MCU – STMicro STM32WLE5CCU6 Arm Cortex-M4 32-bit, 256 KB Flash, 64KB RAM RF transceiver – Semtech LX1262 Frequency band – 150 MHz to 930 MHz (Note: the board itself is advertised as supporting 803MHz to 930MHz: IN865, EU868, AU915, US915, KR920, RU864, and AS923) LoRaWAN protocol – […]

Posted on by Tomisin Olujinmi - 18 Comments on The S5 Trekker is a compact Meshtastic communication device for hikers and preppers

The S5 Trekker is a compact Meshtastic communication device for hikers and preppers

s5 minitrekker trekker

The S5 Trekker Bravo and the S5 Trekker Mini are two Meshtastic-enabled radios designed by SpecFive LLC, a team of engineers based in the United States. Both devices are based on the Heltec Wireless Tracker from Heltec Automation. The Wireless Tracker integrates Espressif’s ESP32-S3 system-on-a-chip, a 160 x 80 TFT LCD, a SemTech SX1262 LoRa chip, and a Unicore UC6580 GNSS chip. The MiniTrekker is much lighter than the Trekker Bravo and features a built-in attachment hook for connecting it with other gear. Both radios are built to be durable enough to resist the rigors of outdoor exploration. They come pre-flashed with the open-source Meshtastic software and are ready to be used out of the box. The S5 Trekkers are intended to be used when hiking, trekking, and partaking in other outdoor activities that take one away off the well-trodden path. It is also useful for setting up a reliable […]

Posted on by Tomisin Olujinmi - No Comments on SB Components LoRaWAN gateways and nodes are made for Raspberry Pi and ESP32 boards (Crowdfunding)

SB Components LoRaWAN gateways and nodes are made for Raspberry Pi and ESP32 boards (Crowdfunding)

lorawan product series

UK-based hardware developer, SB Components, has designed a new LoRaWAN product series (gateways and nodes) for the Raspberry Pi SBCs, Raspberry Pi Pico, ESP32, and other hardware, based on RAKWireless RAK5146 and RAK3172 modules. The products are available in up to five variants (plus two relay boards) and are built to cater to hobbyists with different needs. They support several LoRaWAN server platforms including The Things Stack, Chirpstack, and Helium, with adaptive spreading factors, coding rates, and bandwidth configurations. The LoRaWAN products include: Gateways – RAK5146 LoRaWAN Gateway HAT and RAK3172 LoRaWAN Gateway HAT for the Raspberry Pi SBCs Nodes – RAK3172 LoRaWAN Module (Powered by Raspberry Pi Pico), Raspberry Pi RP2040 USB Dongle, RAK3172 LoRaWAN Module (powered by ESP32), LoRaWAN Breakout, GatePi LoRaWAN 4-Ch Relay, GatePi LoRaWAN 8-Ch Relay LoRaWAN (long-range wide access network) uses the LoRa modulation technique to transmit data over large distances. In a LoRAWAN network, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on RAKwireless launches SX1303 based M.2 LoRaWAN concentrator modules and full-duplex gateway

RAKwireless launches SX1303 based M.2 LoRaWAN concentrator modules and full-duplex gateway

Wislink M.2 2242 2280 LoRaWAN SX1303 concentrator modules

RAKwireless has recently introduced two new LoRaWAN products with the RAK5166/67 WisLink M.2 3042/2280 concentrator module based on the Semtech SX1303 RF transceiver and the RAK7285 WisGate Edge Ultra Full-Duplex gateway for high-density network deployments, particularly for smart city infrastructure, metering applications, and other scenarios requiring reliable two-way communication at scale. RAK5166 and RAK5167 M.2 3042 and 2280 LoRaWAN concentrator modules RAK5166/RAK5167 specifications: Wireless Semtech SX1303 baseband processor with 8 x 8 channels LoRa packet detectors, 8x SF5-SF12 LoRa demodulators, 8x SF5-SF10 LoRa demodulators, one 125/250/500 kHz high-speed LoRa demodulator, and one (G)FSK demodulator Tx power up to 27 dBm Rx sensitivity down to -139 dBm @ SF12, BW 125 kHz Supports global license-free frequency band (EU868, IN865, RU864, US915, AU915, KR920, AS923-1, AS923-2, AS923-3, AS923-4) Listen Before Talk (LBT) support Fine Timestamp Built-in ZOE-M8Q GPS module (optional) 2x MHF4 IPEX connectors for the LoRa and GNSS (optional)  antennas Host […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Murata Type 2GT tiny LoRa module features Semtech LR1121 with Sub-GHz ISM, 2.4GHz, satellite S-Band support

Murata Type 2GT tiny LoRa module features Semtech LR1121 with Sub-GHz ISM, 2.4GHz, satellite S-Band support

Murata LR1211 LoRa module

Murata Type 2GT module is a tiny multi-band, low-power radio LoRa module based on the Semtech LR1121, the successor of the LR1120, that supports 860 to 930 MHz and 2.4GHz ISM bands, as well as the 2.1 GHz Satellite S-Band meaning it can work globally. The Type 2GT module measures just 9.98 x 8.70 x 1.74mm and is built on a PCB housed in a metal case and packaged as a land grid array. It combines the Semtech LR1121 RF transceiver IC, a thermally compensated crystal oscillator (TCXO), a second 32KHz crystal, an RF switch, and an RF matching network. Murata Type 2GT module (LBAA0XV2GT-001) specifications: Transceiver – Semtech LR1121 LoRa transceiver LoRa frequencies 860 to 930 MHz (ISM) 2.4 GHz ISM 2.1 GHz satellite S-Band Technology – LoRa, LR-FHSS (Long Range – Frequency Hopping Spread Spectrum) 32 MHz TCXO for maximum frequency accuracy Peripheral I/F – SPI and GPIOs […]

Posted on by Debashis Das - No Comments on Quectel KG200Z LoRa module is now secured by The Things Stack

Quectel KG200Z LoRa module is now secured by The Things Stack

LoRa KG200Z with The Things Industries LoRa Support

In January of this year, Quectel launched the KG200Z LoRa Module, an Arm Cortex-M4-based module boasting a self-proclaimed range of 2-5 kilometers in urban settings and 10-15 kilometers in suburban areas. At that time, it was just another LoRa module with some additional features. However, in the latest development, Quectel and The Things Industries have announced a partnership that ensures this LoRa module comes integrated with “Works with The Things Stack” and “Secured by The Things Stack” certifications, enhancing its value and utility. In simpler terms, it’s been tested and proven to operate smoothly within The Things Stack ecosystem. Earlier this year, we saw STMicro and  Particle Industries release their LoRa-based modules and devices. Feel free to check those out if you are interested. KG200Z LoRa Module Specification: Arm Cortex-M4-based standalone LoRa module (STM32WL) Frequency support – 470–510MHz and 862–928MHz bands Low power – 1.7 μA in deep sleep mode […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on RAKwireless open sources RUI3 multi-target IoT development platform

RAKwireless open sources RUI3 multi-target IoT development platform

Rakwireless RUI3 open source IoT development platform

RAKwireless has made its RUI3 IoT software development platform open-source so that customers or users can implement “nice-to-have” features on top of the features already implemented by the company which could make it even more versatile in a wider range of IoT scenarios. Introduced in 2022, the RAK Unified Interface v3, or RUI3 for shorts, is a modular IoT platform based on the Arduino SDK with additional functions for IoT connectivity and low power that supports a variety of devices and applications. So developers can learn the language, code once, and use the same software on multiple WisBlock core platforms including Nordic Semi nRF52, STM32, ESP32, and Raspberry Pi RP2040 instead of having to juggle between different the Arduino BSP, the ESP-IDF framework, Nordic nRF Connect SDK, or Raspberry Pi C SDK. Users could already use the RUI3 firmware with the RAK3172 (STM32), RAK4630/RAK4631 (nRF52), or RAK11720 (Apollo3) WisBlock Core […]

Posted on by Debashis Das - No Comments on Blues Starnote – An affordable satellite IIoT module with 18 KB of data for Skylo service

Blues Starnote – An affordable satellite IIoT module with 18 KB of data for Skylo service

Blues Satellite IIoT Module

Last month, we wrote about the new Quectel CC660D-LS IoT-NTN module, built in collaboration with Quectel and Skylo. before that, we wrote about Qualcomm 212S and 9205S satellite modems which were also developed in collaboration with Skylo. Those modules support IoT NTN (Non-Terrestrial Networks) which makes them very useful for a variety of applications including sending texts, making voice calls, and providing emergency services, particularly in remote areas. But in a recent development, Skylo partnered with Blues to launch Starnote, a complete backup satellite module that just cost $49. It provides a backup satellite connection for times when cellular or Wi-Fi isn’t available, designed to work seamlessly with the Notecard API. The module features an M.2 E-Key edge connector and a six-pin JST connector (on the backside of the PCB) for easy setup, plus options for external antennas through u.FL connectors. It includes 18KB of Skylo satellite data without any […]

UP 7000 x86 SBC