lpwan News - Page 12 of 23 - CNX Software

April 11, 2020April 11, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

n-Fuse SX1302 Mini PCIe LoRaWAN Concentrator Card to Sell for 100 Euros

Semtech SX1302 LoRa transceiver was announced in Q3 2019 as an updated to the company’s SX1301 LoRaWAN gateway chip with improved efficiency, lower BoM costs, and the ability to handle more traffic. At the time, the company also showcased a mini PCIe LoRaWAN concentrator card reference design pairing SX1302 with SX1250 sub-GHz RF front end, and that could be connected to a Raspberry Pi board via an interface board. n-Fuse has now come up with a commercial product adapted from the reference design with LRWCC2-MPCIE SX1302 Mini PCIe concentrator card designed for LoRaWAN gateways. n-Fuse LRWCC2-MPCIE key features and specifications: MCU – STMicro STM32 (no details provided) LoRa Connectivity Semtech SX1302 digital baseband processor with 2xSX1250 and 1xSX1261 Tx/Rx front-ends Frequency Range – 863 to 870 MHz or 915 to 928 MHz Sensitivity <= -124dBm at SF7, BW 125KHz <= -138dBm at SF12, BW 125kHz <= -125dBm at SF7, BW […]

April 6, 2020April 6, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MIOTY Silicon Vendor Agnostic, Scalable LPWAN Standard to Take on LoRaWAN, NB-IoT

[April 6th update: The article was updated to reflect Fraunhofer invented the technology] There are plenty of LPWAN (Low Power Wide Area Networks) standards designed for low power, low bitrate and long-range connectivity with the most popular currently being NB-IoT and LoRaWAN. But Texas Instruments has joined other smaller companies (Fraunhofer, Ragsol, STACKFORCE, WIKA…) to form the MIOTY alliance in order to develop and promote a new LPWAN standard operating in the sub-GHz range called MIOTY. Texas Instruments explains MIOTY was born due to a lack of scalability and robustness (interferences issues) of current LPWAN solutions. But just like other similar low power WAN standards, it aims to support long-range while achieving long battery life, but MIOTY is also supposed to help IoT developers mitigate performance degradation in high-node-count networks. MIOTY works in the same license-free bands (868 MHz, 915 MHz …) as LoRa radios with no costs involved to […]

March 11, 2020September 2, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Meshtastic Mesh Networking Project Combines ESP32, LoRa and GPS Radio

Meshtastic is a project using off-the-shelf, inexpensive ESP32-based hardware with GPS & LoRa connectivity to create mesh networks helping hikers. skiers, paragliders, or people exercising other outdoor activities communicate short messages such as their GPS location. This allows each member of a private mesh network to see the location and distance of all other members and read/or any text messages sent to a group chat. No phone is required unless you have an ESP32 LoRa board without GPS in which case it would get the GPS coordinates from your phone over Bluetooth. A phone is also needed to send a message. The project currently works on three different boards TTGO T-Beam, TTGO LORA32 and Heltec LoRa 32. The T-Beam is recommended as it sells for around $26 plus shipping and features a 18650 battery holder so you can source the battery easily locally. Just make sure to purchase the right […]

March 9, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Thundercomm Announces Qualcomm based Modules for Smart Speakers, LTE IoT, Smart Retail, and 5G Applications

Based in California in the US, Thundercomm Technology Co., Ltd. (aka Thundercomm) is a provider of IoT products & technologies for OEM/ODMs, enterprises and developers. The company introduced several Qualcomm based “TurboX Systems-on-Module” for smart speakers, LPWAN IoT devices with NB-IoT and LTE Cat M1 connectivity, smart retail applications, and 5G powered devices. TurboX C404 and C405 SOMs for Smart Speakers and Soundbars Key features and specifications: SoC – Qualcomm Snapdragon C404 / C405 with CPU – Quad-core Arm Cortex-A53 @, 1.4 GHz GPU (C405 Only) – Qualcomm Adreno 306 GPU @ 600 MHz DSP -2x Hexagon QDSP6 v66 – Low Power Audio Subsystem & Audio Compute DSP System Memory & Storage – 1GB LPDDR3 + 8GB eMMC flash in eMCP package; SD card signals Connectivity 2×2 MIMO WiFI 5 802.11 a/b/g/ac + Bluetooth 5.0 + FM via WCN3999 Gigabit Ethernet (RGMII) Display Interfaces (C405 Only) 4-lane MIPI DSI port […]

February 21, 2020 by Dejan Petrović - No Comments

The Things Industries Launches Global Join Server for Secure LoRaWAN

Co-Founder and CEO of The Things Industries Wienke Giezeman announced the launch of Global Join Server (GJS) which is a secure component of the LoRaWan server. As an ecosystem, Global Join Server allows activating devices of any LoRa network from anywhere on the World. According to Giezeman, it works with the Things Network, the Community Network, cloud hosting solutions, etc. It works no matter if it is a part of a network server outside the Things Industries, as long it uses LoRa standard interfaces. The Global Join Server’s role is to store root keys, generate session keys and send them securely to the Network Server and Application Server. There is no more need to send keys by email or to print them on the boxes, they are already in a secure place. The Things Industries offers to device makers, module makers and distributors, access to a network-agnostic Join Server of […]

February 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

$99 RAK7246 LoRaWAN Developer Gateway Features Raspberry Pi Zero W SBC

Outdoor LoRaWAN gateways meant to be deployed in the field usually cost several hundred dollars, so companies also offer cheaper gateways for indoor use that can be used by developers. RAKWireless offers this type of gateway with products such as Pilot Gateway Pro RAK7243 based on Raspberry Pi 3 Model B+ board, or RAK7244 LoRaWAN Developer Gateway featuring the more recent Raspberry Pi 4 board and sold for $212 and up with price depending on options such as cellular connectivity. The company has now worked on providing much cheaper indoor/developer gateways with their RAK7246 and RAK7246G LoRAWAN developer gateways with the latter adding GPS. RAK7246 is available. RAK7246 key features and specifications: SBC – Raspberry Pi Zero W board with Broadcom BCM2835 ARM11 processor @ 1GHz, 512MB RAM Storage – 16GB MicroSD card Connectivity 802.11 b/g/n WiFi and Bluetooth 4.0 via Cypress CYW43438 module found on RPi Zero W board […]

February 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MikroTik wAP LoRa8/LoRa9 LoRa Gateway Kits Launched for $169

Last year, MikroTik announced they had worked on several LoRa products including R11e-LoRa8EU mini PCIe LoRaWAN Gateway/concentrator card, wAP LoRa8 kit (LoRa & WiFi gateway) with the mini PCIe card, as well as a 6.5 dBi Omni antenna kit to extend the range provided by the 2 dBi internal antenna. All three products are now available with R11e-LoRa8EU mini PCIe selling for $89, wAP LoRa8 kit going for $169, and the optional antenna kit adding $49. The company also introduced wAP LoRa9 kit with R11e-LoRa9 mini PCIe card geared towards markets (like the USA) using the 902-928 MHz frequency band and selling for the same price. MikroTik wAP LoRa8 kit (RBwAPR-2nD&R11e-LoRa8) specifications: SoC – Qualcomm Atheros QCA9531 MIPSBE (Big Endian) processor @ 650 MHz System Memory – 64 MB RAN Storage – 16 MB flash Connectivity Wired – 10/100M Fast Ethernet WLAN – 2.4 GHz 802.11b/g/n WiFi 4 @ up […]

January 30, 2020September 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Gateworks GW16122 IoT mPCIe Card Comes with Long Range Sub-GHz and 2.4GHz Radios

Gateworks GW16122 Dual-Band IoT mPCIe Card

Gateworks GW16122 is a mini PCIe card that adds sub-GHz and 2.4GHz radio to the company line of Ventana and Newport Linux SBC’s, and is meant for industrial IoT (IIoT) applications as an alternative to LoRa and Sigfox. The second generation of the card is based on Texas instruments CC1352P dual-band wireless SoC that supports Wireless M-Bus, IEEE 802.15.4g, 6LoWPAN, KNX RF, and Wi-SUN at sub-GHz frequencies (EU: 868MHz, US: 915MHz), and Bluetooth 5 Low Energy, Thread, and Zigbee at 2.4 GHz. Gateworks GW16122 key features and specifications: MCU – Texas Instruments CC1352P Arm Cortex-M4F MCU @ 48 MHz with 352KB flash, 80KB SRAM, dual-band wireless radio transmitter/receiver Radios Sub-1 GHz Radio 868MHz EU, 915 MHz US (default) Low Power, sensor nodes can run on a coin-cell battery -121dBm Receive Sensitivity for long-range communication 20dBm Output Power Texas Instruments TI-RTOS and TI-15.4 Stack M-Bus, IEEE802.15.4g, Contiki 6LoWPAN, Wi-SUN, KNX RF […]