lora News - Page 27 of 27 - CNX Software

April 18, 2016April 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

LoRaONE is a Small LoRa IoT Development Board Based on Atmel SAMD21 MCU, Microchip LoRaWAN Module (Crowdfunding)

While there are many long range LPWAN standards, LoRa appears to be one of the most popular with boards such as LoPy, and now SODAQ LoRaONE module hitting crowdfunding campaigns. LoRaONE is powered by an Atmel Cortex M0+ micro-controller, features Microchip RN2483 or RN2903 LoRaWAN module, GPS, and various sensors. LoRaONE board specifications: MCU- Atmel ATSAMD21G18 ARM Cortex M0+ micro-controller @ 48 MHz with 256 KB flash memory, 32KB SRAM, and up to 16 KB EEPROM (by emulation) Connectivity LoRa via Microchip RN2483 (433/868 MHz) or RN2903 (915 MHz) module depending on your region GPS via u-blox EVA 7M USB – 1x micro USB port for power and programming Expansion headers (unpopulated) 14x digital pin, 12x for analog and 8x for PWM, plus UART, SPI and TWI (I2C) Analog output pin – 10-bit DAC External Interrupts: Available on all pins DC Current per I/O pin: 7 mA Operating Voltage – […]

February 23, 2016February 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Canonical Introduces SoDeRa Software Defined Radio Solution for Base Stations and IoT Gateways

Canonical and Lime Micro have jointly announced SoDeRa low-cost software defined radio (SDR) which can be programmed to support any type of wireless standard including UMTS, LTE, LoRa, Bluetooth, Zigbee, RFID, Digital Broadcasting, and more, and aiming at helping operators reducing costs & complexity, while speeding up time to market and providing greater flexibility. The kit will include a board with the following specifications: FPGA – Altera Cyclone IV EP4CE40F23 Altera FPGA (compatible with EP4CE30F23) System Memory – 256 MB DDR2 SDRAM RF Lime Microsystems LMS7002M Transceiver with continuous Frequency range of 100 kHz – 3.8 GHz 4 x TxOut and 6 x RxIn U.FL connectors for RF cables Power Output (CW): up to 6.5 dBm Wi-Fi, 2G, 3G, LTE, any other air interfaces USB – 1x micro USB3 via CYUSB3014-BZXC Cypress Microcontroller for control, data transfer and power Misc – Status LEDs, RGB LEDs, 4x switches Dimensions – 100 mm x […]

February 10, 2016March 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

LoPy Tiny IoT Developer Board Runs MicroPython, Supports LoRa, WiFi and Bluetooth (Crowdfunding)

Pycom launched WiPy last year, a WiFi IoT board based on Texas Instruments CC3200 ARM Cortex M4 SoC, and a few months after sending rewards to their Kickstarter backers, they are back on the crowdfunding platform to launch LoPy, another IoT development board that runs MicroPython and offers LoRa, WiFi and Bluetooth LE connectivity. LoPy board hardware specifications: SoC – Dual processor @ 160 MHz with WiFi & BLE radio with 400 kB RAM, 1MB flash External Storage – 4MB flash Connectivity 802. 11b/g/n @ 16Mbps with WEP, WPA/WPA2 WiFi security; SSL/TLS support; AES encryption engine. Bluetooth Classic and Low Energy LoRaWAN Semtech LoRa transceiver SX1272 @ 868 MHz (Europe) or 915 MHz (North America). Range – Node: Up to 40km; Nano-Gateway: Up to 5 km Nano Gateway Capacity – Up to 100 nodes. Internal chip antenna and u.fl connectors for external antennas Headers – 2x 14-pin headers for: Up […]

January 20, 2016January 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

WAVIoT LPWAN Technology Powers Low Cost Smart Water and Electricity Meters

With the rise of IoT and M2M applications, more and more Low Power Wide Area Network (LPWAN) standards have been launched or being worked on, such as Sigfox, LoRa, 802.11ah “Hallow”, Weightless, etc… with all promising long range, low power consumption, and support for a high number of nodes. WAVIoT, a US startup founded in 2011, has decided to create its own solution called WAVIoT Nb-Fi (Narrowband Fidelity) that works in ISM bands, offers up to 50km line-of-sight range, supports up to 2 million nodes by gateway, lasts over 20 years on a small battery, and with WAVIoT said to cost as low as $2 per node. The technology is already available in smart electricity and water meters, and modules as shown in the picture below. Here are some of WAVIoT Nb-Fi technical specifications: DBPSK on physical layer of signal transmission; End-nodes transmit radio signal in 10-500 kHz bandwidth Minimum […]

January 14, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

CYCLONE F100 Tegra K1 Fanless Embedded Computer Supports up to 8GB RAM, SATA, and Various Networking Options

Calao Systems has added a new member to the their rugged embedded computers family with Cyclone F100 powered by Nvidia Tegra K1 quad core Cortex A15 processor with up to 8GB RAM, optional industrial grade SATA Nandrive, and mSATA, dual Gigabit Ethernet, and mPCIe connectivity options for IoT and M2M with LoRA, WiFi, RF radios, etc… Target applications include surveillance, identification, transport, robotic, graphic enhanced digital signage, and medical equipment. Cyclone F100 specifications: SoC – Nvidia Tegra K1 quad-core ARM Cortex A15 processor @ 2.3 GHz with 192-core Kepler GPU supporting OpenGL 4.4, OpenGL ES 3.1 and CUDA/GPGPU System Memory – 2 GB DDR3L (Options for 4 and 8GB on request) Storage – 8 GB eMMC, 8 MB SPI flash and micro SD card slot. Optional: Industrial grade SATA Nandrive, mSATA socket Video Output – HDMI, options: LVDS and DisplayPort Audio I/O – HDMI, optical S/PDIF out, Mic In / […]

December 15, 2015November 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Microchip Introduces $11 RN2483 & RN2903 LoRa Modules and $70 LoRa Evaluation Kits for IoT & M2M Applications

LoRa is one of those long range low power WAN standards used for the machine to machine (M2M) and Internet of things (IoT) applications. I already featured a Semtech Lora module here with a line-of-sight range of up to 20 to 30km, and the company has just partnered with STMicro to deploy LoRa solutions, but today, I’m going to have a look at Microchip Lora modules and development kits that I discovered in the company’s Micro Solutions Nov/Dec 2015 publication. The company has launched two modules for the European and North American markets with respectively RN2483 LoRa 433/868 MHz R&TTE Directive Assessed Radio Modem and RN2903 915 MHz North American modem. Apart from the different frequencies, both modules have similar features: On-board LoRaWAN Class A protocol stack Tx/Rx Power RN2483 – 40 mA (14dBm, 868MHz) Tx, and 14.2 mA Rx @ 3.6V RN2903 – 124 mA Tx max, and 13.5 mA […]

October 7, 2015October 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Archos Introduces Free PicoWAN IoT Gateway, Costing 75 Cents Per Year Per Connected Device

The Internet of Things is promising billions of connected devices in the next few years, and while devices at home can usually connect through your broadband connection at no extra cost, devices on the field may need to use cellular connectivity and cheap 2G network are being phased out by Telcos. Weightless, operating over white space frequencies, is one of several solutions proposed to connect IoT objects over longer distances, but Archos has their own project with PicoWAN pico-gateways using LoRa(WAN) protocol which allows for several kilometers range. PicoWAN would plug into your wall socket, connect to your broadband network over WiFI and offer connectivity to various “things” over LoRa. Creating a cellular network is expensive, due to the costs of base stations, but PicoWAN is so cheap, 100 times cheap than traditional base stations, that Archos plans to giveaway 200,000 gateways across Europe to create an IoT network. That […]

September 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Comparison Table of Low Power WAN Standards for Industrial Applications

WiFi, Bluetooth and Zigbee are commonly found in consumer devices part of the “IoT ecosystem”, but the range, cost, power consumption, and/or scalability of these wireless standards are not suitable. For example, agricultural and forestry applications normally require long distance, and smart parking or city lighting may requires scalability to a great number of nodes, so alternatives are needed. EDN wrote a thorough article comparing 10 alternative wireless standards: Weightless-W, Weightless-N, Weightless-P, SigFox, LoRaWAN, LTE-Cat M, IEEE P802.11ah, Dash7, Ingenu RPMA, and nWave. The table includes the frequency band, channel width, range, transmit power, packet size (minimal or maximal), downlink and uplink data rates, maximum number of connected devices, topology, roaming capability, and status. If you had to implement something today, four to five solutions are “in deployment”: SigFox, Ingenu RPMA, nWave, LoRa, and possibly Dash7, while the other are only starting to get deployed, or will be finalized in […]