lora News - Page 17 of 28 - CNX Software

November 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$10 HelTec CubeCell LoRa Board Features Cypress PSoC 4 MCU

HelTec CubeCell is an Arduino-compatible LoRa module based on Semtech SX1262 transceiver and a Cypress PSoC 4 mixed-signal MCU. The module itself currently sells for $6.90, but you’ll also find a more convenient board for $9.90, as well as a $13.90 IP67 “capsule” housing a battery, an antenna, and a sensor board. All three are available on the same Aliexpress page. CubeCell LoRa board specifications: SoC – ASR Microelectronics ASR6501 with MCU – Cypress PSoC 4 Arm Cortex-M0+ @ 48 MHz with 128KB flash, 16KB SRAM LoRa Transceiver – Semtech SX1262 LoRa Connectivity Bands – EU433, CN470-510, EU863-870, US920-928 Output Power – 21 dB +/- 1 dB max LoRaWAN standard protocol support USB – 1x Micro USB port for power and programming Expansion – 2x 11-pin headers with GPIO’s, UART, I2C, SPI, ADC, Reset, and VIN, 5V, 3.3V, and GND power signals Misc – User and boot buttons, RGB LED […]

October 21, 2019 by Ayo Ayibiowu - 4 Comments

STMicroelectronics Introduces Affordable LoRa Development Packs For All User Types

STMicroelectronics has recently announced the launch of a new set of LoRa Development packs, which are not only affordable, but they are aiming to a large pool of users from big organizations, small companies, hackers, engineers, students, and hobbyists. The ready-to-use development packs are aimed for applications bent on leveraging LoRa ’s long-range, low-power wireless IoT connectivity for tracking, positioning, metering, and many related applications. STMicroelectronics is releasing the P-NUCLEO-LRWAN2 pack and P-NUCLEO-LRWAN3 pack. Both packs provide a complete LoRaWAN development kit, and they include gateways, end-nodes, and ST tools, which are all based on the STM32 Nucleo evaluation boards. The LoRa gateway on both packs is based on the STM32 Nucleo-144 development board, NUCLEO-F746ZG. The STM32 Nucleo-144 development board with STM32F746ZG MCU supports Arduino, ST Zio, and Morpho connectivity. The Gateway header pins are exposed out to facilitate more development, and they support interfacing with LoRaWAN network-server providers LORIOT, Actility, myDevices Cayenne for LoRa […]

October 18, 2019October 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

RAKWireless RAK4260 is a Tiny LoRAWAN Module based on Microchip SAMR34 LoRa SiP

Rakwireless has just announced a new module part of their LPWAN family: RAK4260 LoRaWAN module based on Microchip ATSAMR34J18B LoRa SiP and at just 15x15x1.2 mm, one of the smallest LoRaWAN modules in the market. The new module is cheaper than the company’s earlier RAK811 module and consumes less power at just 790 nA in sleep mode. The company also provides a RAK4260 evaluation board with easy access to GPIOs and serial interfaces. RAK4260 LoRaWAN Module Specifications: SiP – Microchip ATSAMR34J18 SiP with SAM L21 Arm Cortex M0+ MCU @ 48 MHz, up to 40 KB RAM, up to 256 KB Flash LoRa Connectivity Frequency Range – 862 to 1020 MHz High level of accuracy and stability (32MHz TXCO) Max Tx Power: 20dBm; Max Sensitivity: -148dBm; Rx Current: 17mA (typical) Compliant with LoRaWan 1.0.2 Expansion – Castellated holes with I2C, SPI, ADC, UART, GPIOs Power Consumption Low RX current of […]

October 16, 2019October 16, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Semtech SX1302 LoRa Transceiver to Deliver Cheaper, More Efficient Gateways

After our interview with Rak Wireless CEO, we received a comment inquiring about the availability of SX1302 gateways. Semtech so far had two LoRa transceivers for gateways namely SX1301 and SX1308, but I had never heard about a third one. Semtech SX1302 is brand new, the latest generation of baseband LoRa chip for gateways that is said to reduce current consumption in order to simplify the thermal design of gateways, as well as the BoM (bill of materials) costs), while being capable of handling a higher amount of traffic. Semtech SX1302 LoRa Transceiver Key features: Up to -141 dBm sensitivity with SX1250 Tx/Rx front-end 125 kHz LoRa reception with: 8 x 8 channels LoRa packet detectors 8 x SF5-SF12 LoRa demodulators 8 x SF5-SF10 LoRa demodulators 125 /250 / 500 kHz LoRa demodulator (G)FSK demodulator Direct interface to Semtech transceivers SX1255, SX1257 and SX1250 SPI host interface Single 32 MHz […]

October 16, 2019October 16, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Dragino LHT65 is a $30 LoRaWAN Temperature & Humidity Sensor

LHT65 LoRaWAN Temperature & Humidity Sensor

If you’d like to monitor temperature and/or humidity in remote locations, one way is to get a LoRaWAN gateway, and setup a few LoRaWAN nodes connected to your own temperature & humidity sensors, and add a battery and enclosure. But if you’d like to save some time, and get a turnkey solution, Dragino LHT65 LoRaWAN temperature & humidity sensor may be an option. The sensor comes with an internal SHT20 sensor, and as well as an external DS18B20 waterproof temperature sensor. Features & specifications: LoRa Connectivity Frequency Bands – CN470, EU433, KR920, US915, EU868, AS923, AU915 LoRaWAN Class A protocol Sensors Sensirion SHT20 (internal) Temperature – Range: -40 ~ 125 °C; 0.1°C resoultion; +/-0.3°C accuracy; long term drift < 0.02 °C/yr Relative Humidity – Range: 0 to 100%; resolution: 0.04%; accuracy +/-0.3%; DS18B20 (external) – Range: -55 °C~ 125 °C; resolution: 0.0625 °C; +/-0.5°C accuracy from -10°C to +85°C; +/-2°C […]

October 15, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

LPWAN Market Update – An Interview with RAK Wireless CEO

CNX Software interviews Ken Yu, RAK Wireless’ founder & CEO, to learn more about the company and the current & future state of the LPWAN (Low Power WAN) market especially with regards to NB-IoT and LoRaWAN. CNXSoft: We’ve already covered several products from RAK Wireless on CNX Software, starting with WiFi IoT boards several years ago, and more recently LPWAN products based on NB-IoT or LoRa. But for readers who may not be familiar with RAK Wireless yet, could you provide a short description of what the company does? Ken Yu: RAKwireless was founded in 2014. The core founder team consists of professionals coming from established leaders in the Networking industry as Qualcomm, H3C, etc. Because our engineers have more than 10 years of experience designing Wi-Fi solutions, this was the core of our business in the beginning. RAKwireless is working towards a vision of a connected world and In […]

October 11, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arduino MKR WAN 1310 LoRa Board Gets HW Security, Longer Battery Life and a 2MB SPI flash

Two year ago Arduino launched MKR WAN 1300 board powered by Arduino Zero compatible Microchip Atmel SAMD21 32-bit ARM Cortex M0+ MCU and a Murata CMWZ1ZZABZ LoRa module based on Semtech SX1276 and STMicro STM32L microcontroller. The company has now announced a new improved LoRa board – MKR WAN 1310 – with lower power consumption thanks to a new battery charger , a 2MB SPI flash which enables data logging and other OTA (Over-the-Air) functions, and a crypto chip that can securely store credentials and certificates. Specifications: MCU – Microchip Atmel SAMD21 32-bit ARM Cortex M0+ MCU @ 48 MHz with 32 KB SRAM, 256 KB flash (8KB for bootloader) External Storage – 2MB SPI flash Digital I/O Pins – 8x digital I/Os, 12x PWM, UART, SPI, and I2C, 8x external interrupts Analog Pins – 7x analog inputs (8/10/12-bit ADC), and 1x analog output (10-bit DAC) DC Current per I/O […]

August 18, 2019August 17, 2019 by Tiwalade Joanna Okedara - 4 Comments

RAKWireless Introduces RAK7200 LoRa Tracker | Features & Specifications

RAK7200 is a LoRa Tracker node built around the AcSIP S76G chip. It integrates the ultra-low-power STM32L073 micro-controller, the SX1276 LoRa long range modem, and the CXD5603GF GPS receiver. The RAK7200, being a fully functioning LoRaWAN device, is particularly suited for IoT applications. Such as asset tracking, smart vehicle management, location-based service, etc. According to the device manufacturers, RAKWireless, a leading Chinese IoT solutions company, based in Shenzhen, RAK7200 requires minimal setup. Just pop in the included battery, close the housing and you can start sensing your GPS data over LoRaWAN. Furthermore, there are sensors built-into the board: a 9-axis accelerometer and pressure sensor. The new GPS Tracker node is an upgrade over the company’s earlier offering in the GPS tracker space, the RAK7205. Now, the earlier version, the RAK7205, was mostly aimed at developers, with its larger more robust casing and solar panel. But the RA7200 is more of […]