Linux News - Page 91 of 457 - CNX Software

October 21, 2022October 25, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

WisGate Connect Raspberry Pi CM4 gateway supports 2.5GbE, WiFi 6, BLE, LoRaWAN, 4G, 5G, and more

RAKwireless has just introduced the WisGate Connect gateway based on Raspberry Pi CM4 system-on-module with support for Gigabit and 2.5Gbps Ethernet plus various optional wireless connectivity option that can be added through Mini PCIe or M.2 sockets as well as expansion through WisBlock IO connectors. Wireless options include LoRaWAN, 4G LTE, 5G, WiFi 6, Zigbee, WiFi HaLoW, and more, while WisBlock modules enable features such as methane sensor, motor current sensor, temperature sensor, pressure control, and valve control among many others. WisGate Connect (RAK7391) specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5GHz, 1 to 8Gb DDR4, optional 8 to 32GB eMMC flash, optional WiFi 5 and Bluetooth 5.0 LE Storage – MicroSD card socket for CM4 Lite modules only Video Output – HDMI 2.0 up to 4Kp60, 22-pin MIPI DSI connector Camera I/F – 2x 22-pin MIPI CSI connectors Networking Wired – Gigabit Ethernet […]

October 20, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

ZPE Nodegrid mini SR Intel Linux cloud gateway targets IoT and OT applications

ZPE Systems Nodegrid Mini SR is a compact cloud-orchestrated gateway designed for the secure management of Internet of Things (IoT) and Operational Technology (OT) infrastructures. Power by a dual-core Intel processor, the Linux-based device is equipped with 4GB RAM, a 16GB encrypted storage device, and whose hardware looks to be very similar to the Compulab Fitlet2 mini PC with two Gigabit Ethernet ports, four USB 3.0/2.0 ports, and optional support for WiFi 6 and 4G LTE. ZPE Nodegrid mini SR specifications: SoC – Unnamed Intel x86 64-bit dual-core processor, most likely Intel Atom x5-E3930 dual-core Apollo Lake processor (upgrades can be provided) System Memory – 4GB DDR3 Storage – 16 GB Self Encrypted Disk (SED), MicroSD card slot Video Output – HDMI Connectivity 2x Gigabit Ethernet RJ45 ports with PoE Optional 802.11ax WiFi 6 and Bluetooth with two external antennas Optional 4G LTE cellular connectivity with a single SIM card […]

October 20, 2022October 20, 2022 by Leo Zachary - 16 Comments

BIGTREETECH CB1 – A Raspberry Pi CM4 compatible Allwinner H616 system-on-module

The BIGTREETECH CB1 core board is an Allwinner H616 quad-core Arm Cortex-A53 system-on-module (SoM) that follows the Raspberry Pi CM4 form factor and was designed by BIGTREETECH, a company whose main business is related to 3D printer motherboards and their peripherals. The BIGTREETECH CB1 comes with 1GB RAM, an HDMI output interface, 2.4GHz WiFi, and 100Mbps Ethernet. The CB1 has better multimedia capability than the CM4 with support for 4Kp60 H.265/H.264 video decoding and 1080p60 H.264 video encoding, while the Broadcom BCM2711 processor on the CM4 can only handle 4Kp60 H.265 and 1080p60 H.264 video decoding, and 1080p30 H.264 video encoding. Some disadvantages include the lack of CSI and DSI interfaces on the Allwinner H616 system-on-module and the presence of only one video output interface against two for the Raspberry Pi CM4 module. BIGTREETECH CB1 specifications: SoC – Allwinner H616 quad-core Cortex-A53 @ 1.5GHz with Mali-G31 MP2 GPU with OpenGL 3.2, […]

October 19, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MaxLinear unveils MxL31712 & MxL31708 Wi-Fi 7 chips for gateways, routers and access points

MaxLinear has unveiled its first Wi-Fi 7 SoCs with the MxL31712 and the MxL31708 single-chip solutions targeting service provider gateways, Wi-Fi routers, and access points, and delivering more than 70% higher tri-band throughput compared to Wi-Fi 6. The MxL31712 aims at the premium 4×4 tri-band market with a throughput of up to 18.6 Gbps and up to 12 spatial streams, while the MxL31708 will be integrated into mid- to high-range 4×4 dual-band access points and gateways with a throughput of up to 17 Gbps, and up to 8 spatial streams. MaxLinear MxL31712 and MxL31708 share the following features: Single-chip WFA Wi-Fi 7 R1 certifiable Based on IEEE 802.11be (aka WiFi 7 or Extremely High Throughput “EHT”) backward compliant to IEEE 802.11a/b/g/n/ac/ax WiFi 6 Wi-Fi 7 features: Bandwidth up to 320MHz 4096 QAM modulation Multi-Link Operation (MLO) Multi Resource Unit (MRU) Dedicated antenna for Zero Wait DFS (ZWDFS) Enhanced Network […]

October 18, 2022December 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

UP 4000 x86 SBC review with Ubuntu 22.04

The UP 4000 is a credit-card / Raspberry Pi-sized single board computer based on an Intel Apollo Lake processor. AAEON sent me the model with an Intel Atom x7-E3950 quad-core processor, 4GB RAM, and a 64GB eMMC flash, and in the first part of the review, I installed Ubuntu 22.04 since the board would initially only boot to the UEFI shell out of the box. I’ve now spent more time with the board, and in this article, I will report my experience with the UP 4000 SBC running Ubuntu 22.04 checking out features, performance, video playback, power consumption, and so on. Ubuntu 22.04 System info Let’s check out some information after I’ve upgraded the system to the latest packages:

jaufranc@UP-4000-CNX:~$ lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 22.04.1 LTS
Release:	22.04
Codename:	jammy
jaufranc@UP-4000-CNX:~$ uname -a
Linux UP-4000-CNX 5.15.0-48-generic #54-Ubuntu SMP Fri Aug 26 13:26:29 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
jaufranc@UP-4000-CNX:~$ inxi -Fc0
System:
  Host: UP-4000-CNX Kernel: 5.15.0-48-generic x86_64 bits: 64
    Console: pty pts/1 Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
Machine:
  Type: Desktop Mobo: AAEON model: UP-APL03 v: V1.0
    serial: <superuser required> UEFI: American Megatrends v: UPAPBM11
    date: 07/01/2022
CPU:
  Info: quad core model: Intel Atom E3950 bits: 64 type: MCP cache: L2: 2 MiB
  Speed (MHz): avg: 1099 min/max: 800/2000 cores: 1: 1109 2: 1009 3: 1114
    4: 1165
Graphics:
  Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated
  Graphics
    driver: i915 v: kernel
  Display: server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:
    loaded: modesetting unloaded: fbdev,vesa gpu: i915 tty: 80x24
    resolution: 1280x800
  Message: GL data unavailable in console. Try -G --display
Audio:
  Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
    driver: snd_hda_intel
  Sound Server-1: ALSA v: k5.15.0-48-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 00:07:32:a2:cd:17
Drives:
  Local Storage: total: 58.24 GiB used: 12.69 GiB (21.8%)
  ID-1: /dev/mmcblk0 vendor: SanDisk model: DA4064 size: 58.24 GiB
Partition:
  ID-1: / size: 56.53 GiB used: 12.68 GiB (22.4%) fs: ext4
    dev: /dev/mmcblk0p2
  ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat
    dev: /dev/mmcblk0p1
Swap:
  ID-1: swap-1 type: file size: 3.96 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
  System Temperatures: cpu: 6280.4 C mobo: N/A
  Fan Speeds (RPM): cpu: 6553500
Info:
  Processes: 215 Uptime: 2h 20m Memory: 3.68 GiB used: 1.09 GiB (29.5%)
  Init: systemd runlevel: 5 Shell: Bash inxi: 3.3.13

jaufranc@UP-4000-CNX:~$ lsb_release -a

No LSB modules are available.

Distributor ID: Ubuntu

Description: Ubuntu 22.04.1 LTS

Release: 22.04

Codename: jammy

jaufranc@UP-4000-CNX:~$ uname -a

Linux UP-4000-CNX 5.15.0-48-generic #54-Ubuntu SMP Fri Aug 26 13:26:29 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

jaufranc@UP-4000-CNX:~$ inxi -Fc0

System:

Host: UP-4000-CNX Kernel: 5.15.0-48-generic x86_64 bits: 64

Console: pty pts/1 Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)

Machine:

Type: Desktop Mobo: AAEON model: UP-APL03 v: V1.0

serial: <superuser required> UEFI: American Megatrends v: UPAPBM11

date: 07/01/2022

CPU:

Info: quad core model: Intel Atom E3950 bits: 64 type: MCP cache: L2: 2 MiB

Speed (MHz): avg: 1099 min/max: 800/2000 cores: 1: 1109 2: 1009 3: 1114

4: 1165

Graphics:

Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated

Graphics

driver: i915 v: kernel

Display: server: X.org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:

loaded: modesetting unloaded: fbdev,vesa gpu: i915 tty: 80x24

resolution: 1280x800

Message: GL data unavailable in console. Try -G --display

Audio:

Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster

driver: snd_hda_intel

Sound Server-1: ALSA v: k5.15.0-48-generic running: yes

Sound Server-2: PulseAudio v: 15.99.1 running: yes

Sound Server-3: PipeWire v: 0.3.48 running: yes

Network:

Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet

driver: r8169

IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 00:07:32:a2:cd:17

Drives:

Local Storage: total: 58.24 GiB used: 12.69 GiB (21.8%)

ID-1: /dev/mmcblk0 vendor: SanDisk model: DA4064 size: 58.24 GiB

Partition:

ID-1: / size: 56.53 GiB used: 12.68 GiB (22.4%) fs: ext4

dev: /dev/mmcblk0p2

ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat

dev: /dev/mmcblk0p1

Swap:

ID-1: swap-1 type: file size: 3.96 GiB used: 0 KiB (0.0%) file: /swapfile

Sensors:

System Temperatures: cpu: 6280.4 C mobo: N/A

Fan Speeds (RPM): cpu: 6553500

Info:

Processes: 215 Uptime: 2h 20m Memory: 3.68 GiB used: 1.09 GiB (29.5%)

Init: systemd runlevel: 5 Shell: Bash inxi: 3.3.13

Everything looks good with an Intel Atom E3950 processor detected together with 3.68GB RAM and a 56.53GB rootfs EXT-4 partition. UP 4000 features testing There may also be some issues […]

October 17, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Zynq UltraScale+ SoM with up to 12GB RAM targets LiDAR applications

iWave Systems iW-RainboW-G30M is a system-on-module (SoM) based on AMD Xilinx Zynq UltraScale+ ZU4/ZU5/ZU7 FPGA MPSoC specially geared towards LiDAR applications for scientific and military applications. The module comes with up to 12GB of RAM, 4GB for the programmable logic (PL) and 8GB for the Arm Cortex-A53/R5-based Processing System (PS), two 240-pin high-density, high-speed connectors with 142 user I/Os, 16x GTH transceivers up to 16.3Gbps, and four GTR transceivers up to 6Gbps. iW-RainboW-G30M specifications: FPGA MPSoC – AMD Xilinx Zynq Ultrascale+ ZU4, ZU5, or ZU7 MPSoC with Processing System (PS) featuring 2x or 4x Arm Cortex-A53 core @ 1.5 GHz, two Cortex-R5 cores @ 600MHz, H.264/H.265 Video Encoder/Decoder (VCU), ARM Mali-400MP2 GPU @ 677MHz, and Programming Logic (PL)/FPGA with up to 504K Logic cells & 230K LUTs System Memory 4GB DDR4 64-bit RAM with ECC for PS (upgradeable up to 8GB) 2GB DDR4 16-bit RAM for PL (upgradeable up to […]

October 17, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

$858 Linux mini PC features NVIDIA Jetson Xavier NX 8GB module, 128GB NVMe SSD

Seeed Studio is now selling the “A203 Mini PC” industrial Linux mini PC based on an NVIDIA Jetson Xavier NX module with 8GB RAM, and a 128GB SSD loaded with JetPack 5.0.2 (Ubuntu 20.04). If the name is familiar it’s because it is based on the Leetop A203 carrier board introduced about a year ago, with HDMI, two USB 3.0 ports, RS232, and other I/Os. The mini PC also offers Gigabit Ethernet, WiFi, and Bluetooth connectivity, and is designed to operate in the -20°C to 80°C temperature range for embedded, industrial, and functional safety applications. A203 mini PC specifications: System-on-Module – NVIDIA Jetson Xavier NX with hexa-core Armv8 processor, 384-core Volta GPU, 8K/4K video decoder and 4K video encoder, up to 21 TOPS of AI performance, and 8GB LPDDR4x Storage – 128GB M.2 NVMe SSD, MicroSD slot Display – HDMI 2.0 Type-A port up to 4Kp60 Camera – 1x MIPI […]

October 16, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Juno tablet runs Manjaro Linux or Mobian on a Celeron N5100 Jasper Lake CPU

The Juno tablet is a 10.1-inch Linux tablet that ships with Manjaro Linux or Mobian, and is powered by an Intel Celeron N5100 quad-core Jasper Lake mobile processor. The Linux tablet comes with a 1920×1200 resolution IPS touchscreen display, 8GB LPDDR4 soldered on the main board, and a choice between a 256GB, 512GB, or 1TB SSD. Customers can select one of the three Linux distributions with Mobian, as well as Manjaro Linux with either Phosh or Plasma mobile environments. Juno tablet specifications: SoC – Intel Celeron N5100 quad-core Jasper Lake processor @ 1.1GHz / 2.8GHz (Turbo) with 24EU Intel UHD graphics @ 350 / 800 MHz (Turbo); 6W TDP System Memory – 8GB LPDDR4 Storage – 256GB, 512GB, or 1TB SSD; MicroSD card socket Display – 10.1-inch IPS display with 1920×1200 resolution, 60Hz refresh rate, 10-point capacitive touchscreen Video Output – Mini HDMI up to 4Kp60, USB-C DisplayPort up to […]