Linux News - Page 88 of 457 - CNX Software

November 13, 2022November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 765 Comments

Giveaway Week – Mekotronics R58 mini PC

Let’s end Giveaway Week 2022 with a bang, and more exactly a rather powerful Rockchip RK3588 mini PC: Mekotronics R58 (mini). The device comes with 8GB RAM and 64GB flash storage, two 8K capable HDMI 2.0 output ports, one DisplayPort output, one HDMI input, Gigabit Ethernet and WiFI 6 connectivity, as well as a few USB 3.0/2.0 ports, plus support for a SATA drive. I reviewed the Rockchip RK3588 mini PC with Android 12 last July, and I was impressed by the CPU and GPU performance, 4K video playback capabilities, except for AV1 which was not stable at the time, and support for HDMI audio passthrough. Android 12 was quite stable at that early stage as well. Some downsides included the lack of a useful HDMI input app and USB 3.0 performance that could be improved. I always test samples before adding them to the giveaway, and I initially thought […]

November 12, 2022March 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

NanoPi R6S Review – Part 1: Unboxing, Teardown, OpenWrt 22.03, and iperf3

NanoPi R6S is a Rockchip RK3588S powered device that can not only work as a router with two 2.5GbE ports, but also as a mini PC with HDMI and USB ports, and an Edge AI computer thanks to the 6 TOPS NPU found in the processor. FriendlyElec has just sent me two samples of the NanoPi R6S for review. Today, I’ll start with an unboxing, a teardown, and install OpenWrt 22.03 to run some iperf3 benchmarks. I’ll try other features with either Debian or Ubuntu Desktop in a few weeks. NanoPi R6S unboxing The router/mini PC ships with 6 rubber feet (3M), and nothing else. The front panel comes with four LEDs for the system and Ethernet ports, a USB 2.0 port and a USB 3.0 port, as well as an IR receiver “window” (under the USB 3.0 port). The rear panel includes a USB Type-C port that supports 5V […]

November 11, 2022November 11, 2022 by Jean-Luc Aufranc (CNXSoft) - 134 Comments

Orange Pi 5 Rockchip RK3588S SBC launched for $60 and up

Orange Pi 5 (LTS) is a single board computer powered by Rockchip RK3588S cost-down octa-core Cortex-A76/A55 processor that offers one of the best cost/performance ratios on the market with pre-order pricing starting at just $60. The SBC was initially unveiled with up to 32GB RAM and 32GB eMMC flash, but at launch, Shenzhen Xunlong Software offers models with 4GB and 8GB RAM, and no flash storage. The board supports dual 8K display setups thanks to HDMI 2.1 and DisplayPort 1.4 Type-C video outputs and also features up to two MIPI DSI display interfaces, three camera interfaces, Gigabit Ethernet, and WiFi 6 connectivity, and a few USB ports plus a GPIO header. Orange Pi 5 LTS specifications: SoC – Rockchip RK3588S octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ up to 1.8 GHz, Arm Mali-G610 MP4 GPU, 6 TOPS AI accelerator System Memory – […]

November 10, 2022November 10, 2022 by Ian W MORRISON (Linuxium) - 2 Comments

Weibu N10 Review – An OEM Mini PC tested with Ubuntu 22.04, Windows 11

Weibu is a B2B company offering total solutions and OEM/ODM services. Their target clients are computer manufacturers like Acer and Hisense as they don’t sell directly to end users. With their products both the specifications and accessories can be customized according to their customer’s requirements. One of their product lines is mini PCs and they have sent a pre-production sample of their N10 design to showcase their capabilities. In this review, I will look at the various options available for the N10 and briefly look at performance running both Windows and Ubuntu. Weibu N10 hardware overview The key selling feature of this mini PC is the wide range of ports suitable for commercial/industrial usage together with various options for the processor. The N10 is an actively cooled mini PC and the device is 145 x 128 x 54mm (5.71 x 5.04 x 2.13 inches) large with a metal top that […]

November 9, 2022April 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

GL.iNet GL-MT2500A security gateway review – Part 1: Unboxing and teardown

The Brume 2 security gateway/router is powered by a MediaTek MT7981B (Filogic 820) dual-core processor @ 1.3 GHz and is available as the GL-MT2500A with a metal enclosure or the GL-MT2500 with a plastic case. GL.iNet sent me the GL-MT2500A for review. In the first of the review, we’ll have a look at the device and accessories, and tear it down to check out the hardware design and main components. I’ll then need some time to test OpenWrt 21.02 and features such as WireGuard and OpenVPN, AdGuard Home, Tor Anonymity, and soon. GL.iNet GL-MT2500A (Brume 2) unboxing The router ships with a short Ethernet cable, a 5V/2A USB Type-C power supply with EU, US, and UK plug adapters, and some minimal documentation that points to the users to more detailed online documentation and support on the company’s Facebook page. There’s not much too see on the front panel and right […]

November 9, 2022March 17, 2024 by Leo Zachary - 1 Comment

AXERA AX620A 4K AI SoC delivers up to 14.4 TOPS for computer vision applications

AXERA AX620A is a high-performance, low-power AI SoC with a quad-core Arm Cortex-A7 processor and a 14.4TOPs @ INT4 or 3.6TOPs @ INT8’s NPU that is slightly inferior to the Amlogic A311D, and mainly used for AI vision applications. With high computing power and built-in image processing capabilities, the AX620A can support a wide range of AI workloads. It also offers low power consumption with low standby power and fast wake-up, so the chip can be integrated into battery-powered products. AXERA AX620A specifications: CPU – Quad-core Arm Cortex-A7 @ 1.0 GHz with 32KB L1 I-cache + 32KB L1 D-cache per core, 256KB L2 cache, FPU and NEON NPU – 14.4 TOPS @ INT4, 3.6 TOPS @ INT8 with support for Imagenet, AlexNet, VGG, ResNet, GoogLeNet, Faster R-CNN, SSD, FPN, Yolo V3, and other neural networks. ISP Proton AI-ISP up to 4Kp30 4 channels of camera support up to 4x 1080p30 Support […]

November 8, 2022November 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 48 Comments

ODROID-N2L is a smaller, low-cost variant of ODROID-N2+ Arm SBC

ODROID-N2L SBC is a smaller and cheaper version of the ODROID-N2+ single board computer powered by an Amlogic S922X hexa-core Cortex-A73/A53 processor and offered with 2GB or 4GB single-chip LPDDR4X memory. While the ODROID-N2+ is the most popular board from Hardkernel, it’s also fairly larger than most hobbyist SBCs on the market, and following requests from customers, the company designed the ODROID-N2L with a compact form factor that is smaller than Raspberry Pi Model B SBCs and sold at a lower price at the cost of missing some of the features of its big brother. ODROID-N2L specifications: SoC – Amlogic S922X hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 2,208/2,400 MHz, 2x Arm Cortex A53 cores @ 1,908/2,016GHz, Arm Mali-G52 GPU @ 846MHz; 12nm manufacturing process System Memory – 2GB or 4GB LPDDR4 @ 3216 MT/s Storage – eMMC flash module socket up to 128GB, microSD […]

November 8, 2022November 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 123 Comments

Giveaway Week – e-con Systems e-CAM20_CURB camera

Today, we’re giving away the e-con Systems e-CAM20_CURB is a 2.3MP color camera with a global shutter that is designed to work with Raspberry Pi 4 SBC. The camera is based on ON Semiconductor AR0234CS CMOS sensor and supports uncompressed video at 1920 x 1200 (2.3MP) up to 60 fps, 1920 x 1080 (Full HD) up to 65 fps, and 1280 x 720 (HD) up to 120 fps. I just completed the e-CAM20_CURB camera review with Raspberry Pi 4 last weekend and found the video smoothness and quality to be much better than most cameras I’ve tried when there is motion, even in relatively dark scenes, since motion blur and artifacts are reduced. The company provides Yocto Linux and Raspbian/Raspberry Pi OS images with V4L2 drivers and Gstreamer tools, and the camera was fairly easy to use with the Yocto image thanks to the useful documentation provided with the kit. […]