Linux News - Page 85 of 477 - CNX Software

May 25, 2023May 24, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

iW-RainboW-G55M is an OSM-LF compliant module based on TI AM62A Cortex-A53 processor

iWave Systems iW-RainboW-G55M is an OSM Size L compliant system-on-module based on Texas Instruments AM62A single to quad-core Cortex-A53 processor with up to 8GB RAM, 128GB eMMC flash, and a wireless module with WiFi 6, Bluetooth 5.2, and 802.15.4 radios. The iW-RainboW-G55M can leverage the vision processing and deep learning accelerator and the Arm Cortex-R5F real-time cores for control and device management found in the AM62A processor, as well as its display and camera interfaces, peripheral and networking options, to develop products for “man-machine applications at the edge”. iW-RainboW-G55M SoM specifications: SoC – Texas Instruments AM62A SoC (AM62A3, AM62A3-Q1, AM62A7, or AM62A7-Q1) Application processor – Up to four Arm Cortex- A53 cores @ 1.4GHz Real-time cores 1x Cortex-R5F @ 800MHz (MPU Channel with FFI) 1x Cortex-R5F @ 800MHz to support Device Management C7xV-256 Deep Learning Accelerator up to 2 TOPS System Memory – 2GB (default) to 8GB LPDDR4 RAM Storage […]

May 22, 2023May 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$25 Sipeed Tang Nano 20K FPGA board can simulate a RISC-V core, run Linux, retro games

The Sipeed Tang Nano 20K is a low-cost FPGA development board based on Gowin GW2AR-18 FPGA with 20,736 logic cells and 64Mbit RAM, which coupled with 64MBit QSPI flash provides enough resources to simulate a 32-bit RISC-V core booting Linux or playing retro games in an emulator. The FPGA board comes with a USB-C port for power and to load the FPGA bitstream through a BL616 microcontroller that also acts as a USB to serial chip, an HDMI port and an RGB LCD interface for video output, two user buttons, and two rows GPIOs to connect peripherals such as gamepads (through adapters). Sipeed Tang Nano 20K specifications: FPGA – Gowin GW2A-LV18QN88C8I7 with 20,736 logic units (LUT4) 15,552 flip-flops (FF) RAM 41,472 shadow SRAM (S-SRAM) 828K block SRAM (B-SRAM) Numbers of B-SRAM – 46 64Mbit 32-bit SDR SDRAM 48x 18×18 multipliers 2x PLLs 8x I/O Bank Onboard debugger – Bouffalo Labs […]

May 21, 2023May 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Using BTT Pad 7 touchscreen display with Raspberry Pi CM4

The BTT Pad 7, or BIGTREETECH Pad 7 in full, is a 7-inch touchscreen display that ships with the CB1 Allwinner H616 system-on-module compatible with Raspberry Pi CM4. The display is mostly designed for 3D printers with its SPI and CAN Bus interfaces, but it can also be used as a standard tablet PC. So today, I’ll switch the CB1 with a Raspberry Pi CM4 Lite module and report my experience doing the conversion and using it as a Raspberry Pi CM4 tablet PC running Raspberry Pi OS, and test it with a 3D printer with Klipper in another post later on. Installing a Raspberry Pi CM4 (Lite) module in the BTT Pad 7 We’ll need the Pad 7, a Raspberry Pi CM4, and a few tools. The first step is to remove the red heatsink by loosening four screws with a 2.0mm hex key, as well as the cover […]

May 20, 2023May 20, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Intel NUC 13 Rugged “Bravo Canyon” fanless Alder Lake-N mini PC is designed for 24/7 operation

The Intel NUC 13 Rugged, codenamed “Bravo Canyon, is an upcoming fanless and dust-resistant mini PC powered by an Alder Lake-N processor and designed for 24/7 operation suitable for business and industrial applications, albeit just in a 0°C to 40°C or 50°C temperature range. The rugged computer is offered with either an external or internal heatsink, supports up to 16GB DDR5 memory, comes with 64GB eMMC flash, M.2 sockets for NVMe and/or SATA SSDs, two 4Kp60 capable HDMI 2.1 ports, two 2.5GbE networking interfaces, four USB 3.2/2.0 ports, and optional support for WiFi 6, 4G LTE cellular connectivity, and an internal expansion bay. Intel NUC 13 specifications: Alder Lake-N SoC (one or the other) Intel Atom x7425E quad-core processor up to 3.4 GHz with 6MB L3 cache, Intel UHD Graphics; 12W TDP Intel Atom x7211E dual-core processor up to 3.2 GHz with 6MB L3 cache, Intel UHD Graphics; 6W TDP […]

May 19, 2023May 18, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cincoze DX-1200 fanless Alder Lake-S embedded computer targets machine vision, industrial automation

Cincoze DX-1200 is a fanless embedded computer powered by a choice of 12th gen Intel Core (Alder Lake-S) Celeron up to Core i9 CPUs whose mainboard is housed in a rugged and compact chassis designed for industrial edge AI and machine vision applications. The DX-1200 supports up to 64GB of 4800MHz DDR5 memory with ECC, and the Intel Xe architecture of the UHD 770 graphics chip is said to deliver image classification inference performance that is 2.8 times the speed of the Comet Lake-S platform. The embedded computer also offers a wide range of I/Os and as well expansion capabilities for up to four 10GbE, DIO, and COM ports, and M.2 and mPCIe sockets for WiFi, GNSS, 4G, and Bluetooth connectivity. Cincoze DX-1200 specifications: Alder Lake-S SoC (one or the other) Intel Core i9-12900E 16 cores up to 5 GHz with Intel UHD Graphics 770; TDP: 65W Intel Core i7-12700E […]

May 18, 2023May 18, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

BeepBerry handheld Linux computer drives 2.7-inch display with Raspberry Pi Zero W

Good news! The PocketCHIP handheld Linux computer is back! OK, not quite but that’s what the Raspberry Pi Zero-powered BeepBerry reminds me of with a Blackberry-like keyboard, a small 2.7-inch display, and a 2,000mAh LiPo battery for power. The BeepBerry is another open-source hardware design from SQFMI, who previously did the Watchy ESP32 E-Ink smartwatch, that runs Raspberry Pi OS Lite on the Raspberry Pi Zero/Zero W, and also includes a Raspberry Pi RP2040 to handle the keyboard and peripherals. BeepBerry specifications: SBC – Raspberry Pi Zero board with a Broadcom BCM2835 ARM11 processor @ 700 MHz, VideoCore IV GPU, or Raspberry Pi Zero W with WiFi and Bluetooth Storage – MicroSD card slot Display – Ultra-low power high contrast 2.7-inch Sharp Memory LCD with 400 x 200 resolution User input – QWERTY tactile keyboard w/ backlight and touchpad based on Solder Party BB Q20 Keyboard USB – USB-C programming […]

May 17, 2023July 3, 2024 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Pocket-sized 2.8-inch mini PC features an Intel N100 processor, 12GB RAM, up to 2TB storage

Pocket-sized mini PC Intel Processor N100

A pocket-sized 2.8-inch (72 x 72 x 45mm) mini PC based on an Intel Processor N100 SoC with 12GB LPDDR5, and up to 2TB storage has started to show up on Aliexpress for $154 and up under the names ZX01 Plus and Topton M6S. This is the most compact Alder Lake-N mini PC we’ve seen so far, yet it still comes with two HDMI 2.0 ports, a 3.5mm audio jack, Gigabit Ethernet and WiFi 5 connectivity, and three USB 3.2 ports, plus a non-standard 12V USB-C port that’s now common for this type of mini PC. ZX01 Plus / Topton M6S specifications: SoC – Intel Processor N100 Alder Lake-N quad-core processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24 EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – 12GB LPDDR5 @ 4800 MHz Storage Optional 128GB to 2TB M.2 2242 SATA SSD, but […]

May 16, 2023July 8, 2023 by Ian W MORRISON (Linuxium) - 56 Comments

Beelink EQ12 Review – An Intel Processor N100 mini PC tested with Windows 11, TrueNAS, pfSense, Ubuntu, and more

Beelink’s new EQ series of mini PCs form their base product range and feature low-powered Jasper Lake and Alder Lake-N processors with relatively basic port and memory/storage configurations. Perhaps more importantly, they are also the cheapest mini PCs they offer. Having recently announced the EQ12 mini PC featuring an Intel Processor N100 ‘Alder Lake-N’ CPU with up to 16GB RAM, Beelink have now sent one for review. Whilst I’ll cover the basic Windows operation and performance, I’ll also explore how this new mini PC performs when used as an integrated router and NAS. Beelink EQ12 specifications Beelink list the EQ12 specifications as: It is worth noting that the Processor N100 processor only supports a single memory channel and that according to Intel’s specification for the processor, the maximum memory supported is only 16 GB. Intel’s specification for the number of graphical execution units (EUs) also states 24 however software such […]