MangoPi MPi-GW1 RISC-V router will support dual GbE, dual USB 2.0, CAN bus, RS485, and more

RISC-V router

MangoPi is working on the first RISC-V router I’ve seen. The MPi-GW1 is based on the ArtInChip D213ECV 64-bit RISC-V processor with 128 MB DDR3 on-chip, 256MB SPI NAND flash, two Gigabit Ethernet ports, two USB 2.0 ports, MIPI DSI+touch connector,  support for CAN Bus and RS485, and expansion through a 22-pin GPIO header. Routers used to be mostly based on MIPS processors, then Arm processors took over, and maybe RISC-V is next, as MangoPi has just unveiled photos of the first RISC-V router on Twitter, and leaked some tidbits of information over the last two weeks or so on the social media platform. MangoPi MPi-GW1 RISC-V router specifications (preliminary): SoC – ArtInChip D213ECV 64-bit RISC-V (RV64IMAFDC) processor System Memory – 128MB 16-bit DDR3 @ 672 MHz (SiP) Storage – 256MB (2Gbit) SPI NAND flash (Winbond 25N02KVZEIR), microSD card slot (bottom side of the board) Networking – 2x Gigabit Ethernet […]

Link Pi ENC5 v2 video encoder supports up to 5 4Kp30 HDMI inputs

Link Pi ENC5 v2

The Link Pi ENC5 v2 is a video encoder with five HDMI inputs up to 4Kp30, one HDMI output, two audio jacks, Gigabit Ethernet, and a USB 3.0 port that supports RTSP, ONVIF, SRT, and NDI streaming protocols. The system appears to be based on the Hisilicon Hi3531DV200 quad-core Cortex-A53 processor and features 8GB eMMC flash for the OS, plus 4GB RAM. The USB port can be used to record videos to an external hard drive or flash drive or add WiFi or 4G/5G cellular connectivity. Link Pi ENC5 v2 specifications: SoC – Unnamed, but some of the specs are matching the Hisilicon Hi3531DV200 SoC CPU – Arm Cortex A53 quad-core processor @ 1.2GHz with 32KB l-Cache, 32KB D-Cache VPU Decode – H264, H264, MJPEG Encode – Up to 4Kp30 / 1080p60 H.264 Main/Baseline/High/ profiles, H.265 Main profile, MJPEG/JPEG Max Bitrate – 20Mbps Bit rate control – CBR, VBR, AVBR, […]

Orange Pi Zero 3 Allwinner H618 SBC ships with up to 4GB RAM

Orange Pi Zero 3

The Orange Pi Zero 3 is a compact Allwinner H618 quad-core Arm Cortex-A53 SBC with 1GB to 4GB RAM, 16MB SPI flash, micro HDMI output, Gigabit Ethernet, WiFi 5 and Bluetooth 5.0, a USB 2.0 port, and two headers for expansion. It provides an update to the Allwinner H616-powered Orange Pi Zero 2 SBC quadrupling the maximum memory to 4GB and embedding a larger SPI flash. The new board basically offers the same ports but in a different layout and a slightly smaller form factor. Orange Pi Zero 3 specifications: SoC – Allwinner H618 quad-core Arm Cortex-A53 processor @ up to 1.5GHz with 1MB L2 cache and Arm Mali-G31 MP2 GPU with support for OpenGL ES 1.0/2.0/3.2, OpenCL 2.0, Vulkan 1.1 System Memory – 1GB, 1.5GB, 2GB, or 4GB LPDDR4 Storage – 16MB SPI flash, microSD card socket Video Output Micro HDMI 2.0 up to 4Kp60 Video composite (CVBS) via […]

Firefly’s Rockchip RK3588 SBCs are now available with 32GB RAM

ROC-RK3588-PC 32GB RAM

The Rockchip RK3588 datasheet clearly states the processor supports up to 32 GB RAM, and many vendors claimed their board supports up to 32GB RAM at launch, but none were to be found once you accessed a shop, and the maximum was 16GB RAM so far, likely due to availability and the high price of of the two 16GB RAM chips needed to get 32GB of RAM. But Firefly has now discreetly started to sell boards with 32GB RAM including the ROC-RK3588-PC, ROC-RK3588S-PC, and ITX-3358J mini-ITX motherboard. I’ve just noticed I never covered the former, so I’ll have a closer look at it today. Firefly ROC-RK3588S-PC specifications: SoM – Core-3588J system-on-module SoC – Rockchip RK3588 octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, four Cortex-A55 cores, Arm Mali-G610 MP4 quad-core GPU with OpenGL ES3.2 / OpenCL 2.2 / Vulkan 1.1 support, 6 TOPS NPU, and an 8Kp60 […]

$26 WiFi 6 router board features Triductor TR6560 & TR5220 chips

Banana Pi BPI WiFi 6 board

Banana Pi BPI-Wifi 6 is an ultra-low-cost WiFi 6 router board with five Gigabit Ethernet ports based on Triductor Technology TR6560 dual-core Cortex-A9 router SoC and TR5220 WiFi 6 chipset and that sells for just $26.32 plus shipping on Aliexpress, or $39.99 as part of a kit with the board, four antennas, and a 12V power supply. The board is equipped with 512MB RAM and a 128MB SPI flash for OpenWrt, comes with four antenna connectors for WiFi, and can also take an optional 12V PoE module for power instead of relying on a 12V power adapter via a DC jack. Banana Pi BPI-WiFi 6 board specifications: SoC – Triductor TR6560 dual-core Arm Cortex-A9 processor @ 1.2 GHz with LSW (Line-Card Switching) and hardware NAT up to 5 Gbps WiFi chipset – Triductor TR5220 WiFi 6 chipset System Memory – 512 MB DDR3 Storage – 128MB SPI NAND flash Networking […]

64-core RISC-V motherboard and workstation enable native RISC-V development (Crowdfunding)

64-core RISC-V motherboard

There’s now a microATX motherboard and workstation for native RISC-V development based on the SOPHON SG2042 64-core RISC-V C920 processor with up to 128GB DDR4 memory, various SATA and M.2 NVMe interfaces for storage, three PCIe x16 slot for expansion and more. I remember a few years ago, there was a lot of talk about making a workstation for native Arm development instead of relying on x86 machines, cross-compilation, and emulation. So we got hardware like the HoneyComb LX2K, Ampere eMAG, and more recently the ADLINK Ampere Altra Dev Kit to achieve this goal. The RISC-V ecosystem is now getting something similar thanks to the Milk-V Pioneer microATX motherboard and the Pioneer Box that provides a complete 64-core RISC-V workstation with DIMM memory, SATA and NVMe storage, a graphics card, 10GbE networking, a 350W power supply, and more. Pioneer board specifications: SoC – Sophgo SOPHON SG2042 64-core RISC-V processor (T-Head […]

Popcorn Computer PopStick – A $29 USB Linux computer powered by an Allwinner F1C200s ARM9 processor

PopStick USB Linux computer

Popcorn Computer’s Popstick may look like a USB flash drive, but it’s actually a USB computer running Linux on an Allwinner F1C200s ARM9 processor with 64MB RAM on-chip. The PopStick support USB gadget mode so it can appear as all sort of USB devices such as a scriptable USB Keyboard and Mouse, a mass storage device, or even an Ethernet-connected computer using USB Ethernet which you can access with SSH. PopStick specifications: SoC – Allwinner F1C200s ARM926EJ-S (ARMv5TE) processor @ 533 MHz with 64 MB Embedded DDR1 Storage 128 MB SPI NAND Flash for OS Micro SD Card Slot Both storage devices are bootable USB 1x USB Type-A connector with support for USB Gadget mode, so the board can be seen as a USB Ethernet, Serial, Mass Storage, HID (keyboard/mouse), etc… 1x micro USB connector for serial Console Power Supply – 5V via USB Type-A port Dimensions – N/A If […]

Qualcomm IPQ9574 “AL02” router board support WiFi 7 modules, 10GbE networking

Wallys DR9574 WiFi 7 board

The recent Linux 6.4 release included initial support for the AL02 WiFi 7 router board powered by a Qualcomm IPQ9574 quad-core Cortex-A73 processor part of the Qualcomm Networking Pro 1620 platform with the board featuring 2GB DDR4 RAM and 256MB NAND flash. A couple of weeks ago, I was contacted by Wallystech about their DR9574 WiFi 7 board based on the IPQ9574 processor, but I ended up not writing about it due to the lack of information and low-quality photos. But it turns out it’s actually the Qualcomm AL02 reference board that’s also provided by Compex. Both companies are world-leading in the sense they offer low-quality and blurry pictures in a way that’s unmatched in the industry, but we do have some specifications, so let’s have a closer look. AL02 / DR9574 board specifications: SoC – Qualcomm IPQ9574 quad-core Arm Cortex-A73 processor @ 2.2GHz processor System Memory – 2GB DDR4 […]

Exit mobile version
Youyeetoo X1 x86 SBC