Linux News - Page 71 of 457 - CNX Software

April 14, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Embedded Open Source Summit 2023 schedule – Zephyr OS, Security, IoT, Embedded Linux, and more

The Linux Foundation has just announced the full schedule for the Embedded Open Source Summit, which will take place on June 27-30, 2023 in Prague, Czech Republic, as well as virtually starting on June 26. Over 175 sessions, birds of a feather (BoF) tracks, and workshops related to embedded and open-source innovation will be presented at the event itself comprised of six micro conferences: Automotive Linux Summit Europe, Embedded IoT Summit, Embedded Linux Conference, LF Energy Embedded Summit, Safety-Critical Software Summit, and Zephyr Project Developer Summit. Even though I’m not going to attend personally, I’ve gone through the schedule to create my own little virtual schedule with some sessions relevant that should be interesting to me and hopefully to CNX Software readers. Monday, June 26 (Virtual sessions) The first day of the event will have a Yocto Dev training in the morning, and a bunch of virtual sessions that are […]

April 13, 2023April 13, 2023 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

$7 DongshanPI-PicoW is a small Arm Linux board with SSW101B USB WiFi chip, four 12-pin headers

Based on its name, the DongshanPI-PicoW board/module aims to be an Arm Linux alternative to the Raspberry Pi Pico W with a SigmaStar SSD210 dual-core Cortex-A7 processor with 64MB RAM, an SSW101B USB WiFi 4 chip, plus a good amount of I/Os thanks to four 12-pin headers. The module also comes with a 128MB SPI flash to run Linux, takes 5V power input, and offers a display interface up to 1280×800, USB 2.0, audio interfaces, and more in a small 31×31 mm form factor with 48 through and castellated holes that should be easy to integrate into compact devices. DongshanPI-PicoW specifications: SoC – SigmaStar SSD210 dual-core Arm Cortex-A7 at up to 1.0GHz with FPU, NEON, MMU, DMA, 2D graphics accelerator, 64MB on-chip DDR2 RAM Storage – 128MB SPI NAND flash (Winbond W25N010) Connectivity – Sigmastart SSW101B 802.11b/g/n 2.4GHz 1T1R WiFi 4 module + u.FL antenna connector USB switch – Onsemi […]

April 12, 2023April 12, 2023 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Cool Pi CM5 evaluation board features Rockchip RK3588/RK3588J system-on-module

Cool Pi CM5 is a system-on-module based on Rockchip RK3588 or RK3588J (industrial temperature range) octa-core Arm Cortex-A76/A55 processor with up to 32GB RAM, 256GB eMMC flash, offered with a development board with dual GbE, two 8K HDMI 2.1 ports, a PCIe 3.0 x2 slot, M.2 NVMe and SATA storage, and more… At the end of last year, we wrote about the Cool Pi 4 as a much faster alternative to Raspberry Pi 4 SBC, and the company has now launched a Raspberry Pi Compute Module 4 and Radxa CM5 alternative with the Cool Pi CM5 MXM 3.0 system-on-module that they offer along with a feature-rich evaluation board (EVB). Cool Pi CM5 EVB specifications: System-on-Module SoC – Rockchip RK3588(J) octa-core processor with 4x Cortex‑A76 cores @ up to 2.4GHz, 4x Cortex‑A55 core @ 1.8GHz Arm Mali-G610 MP4 “Odin” GPU Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 […]

April 11, 2023April 14, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Firefly Station P3D is a modular Rockchip RK3588 mini PC with swappable cards

Powered by the Rockchip RK3588 processor, Firefly Station P3D modular AI mini PC comes with two swappable layers, namely the top one with the main board and default ports such as two HDMI output ports, one HDMI input, Gigabit Ethernet, two USB 3.1 ports, etc…, and the bottom layer that can be configured with various ports depending on your specific application. The top layer is basically the new Station P3 mini PC with RK3588 octa-core Cortex-A76/A55 processor, up to 32B RAM, 256GB eMMC flash, an M.2 2280 NVMe SSD socket, and dual-band WiFi 6 & Bluetooth 5.0 plus all the ports mentioned above. Fire Station P3D specifications: SoC – Rockchip RK3588 octa-core processor with CPU – 4x Cortex-A76 cores @ up to 2.4 GHz, four Cortex-A55 cores @ up to 1.8 GHz GPU – Arm Mali-G610 MP4 quad-core GPU with OpenGL ES3.2 / OpenCL 2.2 / Vulkan1.1 support AI accelerator […]

April 10, 2023March 13, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

IP67-rated CM4 AI camera uses Raspberry Pi Compute Module 4 for computer vision applications

EDATEC ED-AIC2020 is an IP67-rated, Raspberry Pi CM4-based industrial AI camera equipped with a fixed or liquid lens and LED illumination that leverages the Raspberry Pi Compute Module 4 to run computer vision applications using OpenCV, Python, And Qt. We’ve previously written about Raspberry Pi Compute Module-based smart cameras such as the Q-Wave Systems EagleEye camera (CM3+) working with OpenCV and LabVIEW NI Vision and the StereoPi v2 (CM4) with stereo vision. But the EDATEC ED-AIC2000 is the first ready-to-deploy Raspberry Pi CM4 AI camera we’ve covered so far. EDATEC “CM4 AI camera” (ED-AIC2020) specifications: SoM – Raspberry Pi Compute Module 4 up to 8GB RAM, up to 32GB eMMC flash Camera 2.0MP global shutter or 5.0MP rolling shutter Acquisition rate – Up to 70 FPS Aiming point – Red cross laser Built-in LED illumination (optional) Scanning field Electronic liquid lens Fixed focal length lens Networking Gigabit Ethernet M12 port Communication protocols – Ethernet/IP, PROFINET, Modbus […]

April 9, 2023April 11, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cytron CM4 Maker Board review – Part 2: NVMe SSD, RTC, Buzzer, Grove modules, ChatGPT…

We’ve already checked out Cytron’s CM4 Maker Board kit with a Raspberry Pi CM4 system-on-module and booted the system with the included 32GB “MAKERDISK” Class 10 microSD card preloaded Raspberry Pi OS in the first part of the review. For the second part of the CM4 Maker review, I’ve mostly used the 128GB NVMe SSD provided by the company and played with other features of the board including the RTC, the buzzer, some Seeed Studio grove modules, and even got help from ChatGPT for one of the Python programs I used. Booting Cytron CM4 Maker Board with the “MAKERDISK” NVMe SSD I connected several Grove modules with GPIO and I2C interfaces, a Raspberry Pi Camera Module 3, an Ethernet cable, two RF dongles for a wireless keyboard and mouse, an HDMI cable to a monitor, and finally inserted the provided 5V/3.5A USB-C power adapter. The MAKERDISK SSD comes with Raspberry […]

April 7, 2023April 7, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Beelink EQ12 mini PC features Processor N100 “Alder Lake-N” CPU, up to 16GB RAM

Beelink EQ12 is a mini PC powered by an Intel Processor N100 “Alder Lake-N” quad-core processor offered with 8GB or 16GB DDR5 memory, a 512GB NVMe SSD for storage, as well as two 2.5GbE ports, and a WiFi 6 & Bluetooth 5.2 wireless module. The actively cooled computer also comes with two 4K capable HDMI ports, three USB 3.2 ports, and a 10Gbps USB Type-C that also supports DisplayPort Alternate Mode enabling the EQ12 to drive up to three 4K displays. Beelink EQ12 specifications: SoC – Intel Processor N100 Alder Lake-N quad-core processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24 EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – 8GB or 16GB DDR5 4800 MHz RAM Storage 500GB M.2 2280 NVMe SSD upgradeable up to 2TB Support for 2.5-inch SATA SSD / HDD (CNXSoft: not shown in the specs, but a “scalable […]

April 6, 2023April 11, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

PineTab-V RISC-V tablet devkit is based on StarFive JH7110 SoC, PineTab2 design

The PineTab-V is a RISC-V tablet, or rather a tablet development kit, based on StarFive JH7110 quad-core RISC-V SoC, and with the same design as the upcoming Arm-based PineTab2 tablet that’s scheduled to launch on April 11. Pine64 just launched the Star64 single board computer to help with software development on Linux-capable RISC-V hardware, and they took the opportunity to lay out a tablet board based on the same JH7110 to replace the Rockchip RK3566 board found in the PineTab2, so eventually, a working sample should look like that… PineTab-V preliminary specifications: SoC – StarFive JH7110 with CPU – Quad-core 64-bit RISC-V (SiFive U74 – RV64GC) processor @ up to 1.5 GHz GPU – Imagination BXE-4-32 GPU @ up to 600 MHz supporting OpenGL ES 3.2, OpenCL 1.2, Vulkan 1.2 VPU 4Kp60 H.265/H.264 video decoder 1080p30 H.265 video encoder System & Storage Option 1 – 4GB LPDDR4, 64GB eMMC flash […]