Linux News - Page 400 of 451 - CNX Software

June 19, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Cubieboard2 Powered By AllWinner A20 is now Available for $59

Cubieboard is a low cost board based on AllWinner A10 with lots of ports and expansion pins, that supports Linux and Android. There’s now a new version called Cubieboard2 based on the same board but powered by AllWinner A20 dual core Cortex A7 processor instead, and still with 1GB RAM and 4GB Flash. As you can see the specifications are the same as the original Cubieboard except for the SoC: SoC – AllWinner A20 Dual core ARM Cortex-A7 processor with Mali-400 MP2 GPU System Memory – 1GB DDR3 Storage – 4GB internal NAND flash, up to 64GB on micro SD slot, and up to 2TB on 2.5″ SATA disk Video Output – HDMI Connectivity – 10/100M Ethernet, plus optional Wi-Fi module USB – 2x USB 2.0 HOST, 1x USB 2.0 OTG Expansion headers – 96 pins including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more Misc […]

June 19, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

F&S armStoneA9 is a Pico-ITX Board Powered by Freescale i.MX 6 with up to 4GB RAM

F&S Elektronik Systeme GmbH has announced the armstoneA9, a pico-ITX board featuring Freescale i.MX 6 Solo/Dual or Quad Cortex A9 processor with up to 4GB DDR3 SDRAM, and 128 MB flash (1GB+ flash optional) that available in both commercial and industrial temperature range. Here are the specifications of the board: SoC – Freescale i.MX 6 Cortex-A9 (Quad-/ Dual-/ Single-Core) @ 800 MHz to 1 GHz with Vivante GPU System Memory – 1GB (standard version) to 4 GB DDR3 SDRAM Storage – 128MB Flash (1GB+ optional), micro-SD Card Slot, and SATA interface Display: up to SVGA (800 x 600, 65536 colors) via RGB up to WUXGA (1920 x 1200, 18Bit/ 24Bit) via 2x LVDS up to FullHD (1920 x 1080, 24Bit) via HDMI Touch Panel – 4-wire, analogue resistive and PCAP-Touch Interface via I2C Interfaces: 1x 10/100/1000MBit Ethernet 3x Serial (2x RS232, 1x TTL 3.3V Level) 1x USB 2.0 Host, 1x […]

June 15, 2013May 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 50 Comments

Ubuntu 12.04 Now Boots on Rockchip RK3188 mini PCs (T428, MK908, Rikomagic MK802 IV…)

After the release of the RK3188 Linux kernel source code last week, Ian Morrison (Linuxium) has managed to boot Ubuntu 12.04 with XFCE desktop on Tronsmart T428. However, as Tronsmart refused to release their source code, further Linux development is likely to happen on Rikomagic MK802 IV, because Rikomagic released the code for their device, so development work will be easier. AFAIK, this is the first time Linux boots natively on RK3188 devices, so it’s still early stage (no Wi-Fi, Bt or graphics acceleration), but if you still want to give it a try here are the instructions (for T428):] Create a SDCARD with an Ubuntu 12.04 root file system on it and ensure it is labeled as “linuxroot” (Visit Slatedroid for details) Flash your RK3188 minipc with rooted stock 4.1.1 ROM. (May not be needed if you ROM is already rooted) Boot Android, and install Android Terminal Flash t428-3.0.36-linuxium-test+-kernel.img […]

June 13, 2013June 13, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Variscite DART-4460 SoM is Small, Very Small, and Powered by TI OMAP4460

Variscite announced DART-4460, a new system-on-module based on Texas Instruments OMAP4460, with up to 1GB LPDDR2 RAM and 8GB eMMC flash. The key differentiating point of this module is its size (17 mm x 52 mm), which could make it the world smallest dual core module, although Logic PD’s DM3730 / AM3730 Torpedo SOM might be the smallest of all in single core configuration. DART-4460 system-on-module specifications: SoC – Texas Instruments OMAP4460 dual core cortex A9 @ 1.5 GHz max + PowerVR SGX540 GPU System Memory – 512 to 1024 MB LP-DDR2 Storage – Up to 8 GB eMMC + 2x SD / MMC Video – 1080p30 H.264 Encode / Decode Camera Interfaces – 2x CSI, 1x CPI Display HDMI 1.3a 1920 x 1080 24-bit RGB 1400 x 1050 24-bit DSI 1400 x 1050 4-wire resistive touch Connectivity Wi-Fi 802.11 b/g/n Bluetooth 4.0 Audio – Headphone, digital microphone, S/PDIF, Line […]

June 12, 2013June 12, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux / FreeBSD Netboard A10 SBC Powered by AMD G-Series SoC

AMD announced the G-Series SoC, AFAIK the first x86 SoC including CPU, GPU and chipset (ala ARM), at the end of April, and a few products are already available such as Win Enterprises MB-60830. One of those new SoCs, GX-416RA, is especially designed for headless applications, and does not features GPU. Deciso decided to use this processor in the standard version of their Netboard A10, a single board computer that can be used for network based appliances such as IP-PBX, Firewall & UTM or Load Balancer. The company also provides 2 other versions of the board that includes AMD G-Series SoCs with Radeon GPU. Netboard A10 Specifications: SoC: AMD Embedded GX-416RA G-Series SoC (4x 1.65GHz Jaguar cores, 2MB L2 cache, 15W TDP, no GPU) Option 1: AMD Embedded GX-415GA G-Series SoC (4 x 1.5GHz Jaguar cores, 2MB L2 cache, 15W TDP, Radeon HD 8330E GPU) Option 2: AMD Embedded GX-210HA […]

June 12, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Compulab CM-T335 CoM with TI Sitara AM335x Sells for $27

Compulab, an Israeli company specialized in embedded computing, has just released CM-T335, a family of low cost computer-on-module powered by Texas Instruments Sitara AM335x SoC, and sells for as low as $27 per unit for the AM3352 version (no GPU) for 1k orders. The module is available in commercial, extended and industrial grades, and features up to 512 MB RAM, and 1 GB Flash. Specifications: SoC – Texas Instruments AM3352 CPU @ 275MHz, or AM3354 @ 600MHz + PowerVR SGX530 GPU System Memory – 128MB to 512MB DDR3-1066, 16-bit bus width Storage – 128MB to 1GB on-board NAND flash, 8bit, SLC Display – 24-bit Parallel display interface – up to 1366 x 768 Touchscreen – 4/5/8-wire resistive touch-screen support, capacitive touch-screen support through SPI interface Connectivity: Ethernet – 1000Base-T Ethernet interface implemented with AM335x integrated MAC and the Atheros AR8033 RGMII PHY WiFi – 802.11b/g/n implemented with TI WL1271 chipset […]

June 11, 2013June 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Wandboard Dual Benchmarks, Serial Console Fun, and Distributions List

Since last time I tried Android and Ubuntu on the Wandboard, a few things happened. I’m not talking about Wandboard Quad announcement, but instead I received a Class 10 SD card, which makes the system so much responsive, and a RS232 to USB adapter so that I can access the serial console. So today, I’ll publish some benchmark results on Wandboard Dual since none appear to be available, and play a little with the serial console. A few things also happened on the operating systems side with more distributions now available for the board. Prerequisites I ran benchmark in Android, so I installed the latest Android 4.1.2 image (11th of April 2012) to my new SD card (ADATA 16 GB Class 10), and contrary to my poor experience on a 4GB Class 4 micro SD, everything was very fluid. I’ve also installed Google Play in order to install the applications. […]

June 7, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Geniatech Releases ATV510B Source Code, Teases Dual and Quad Core ATV130 and ATV180 mini PCs

XBMCHUB (not affiliated with XBMC) reports that Geniatech has released the Android and Linux source code for ATV510B, one of Geniatech set-top boxes based on AML8726-M3 Cortex A9 processor. ATV510B is the design used by devices such as Pivos XIOS DS, Jynxbox Android HD, Sumvision Cyclone Nano M3, and MyGica ATV510B Enjoy TV Nano 3, among others. Pivos has made U-boot, Linux and XBMC source code available in github for a little while now, but this new release is a pretty large file (2.39 GB) called xbmcandroid_com-ics-base-M3-20121212.tar.bz2 that includes Android 4.0 source including the kernel and the bootloader. This source code should work with “stvmc” hardware, as found in build.prop’s ro.product.name or ro.product.device keys. I haven’t looked into details, but here’s the content of the root directory of the archive: On a separate note, Geniatech also showed the picture below on their Facebook page, with 2 new Android TV Sticks: […]