Linux News - Page 398 of 457 - CNX Software

August 28, 2013 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

iWave Systems Introduces RainboW-G16M µMXM SoM Powered by Freescale Vybrid ARM Cortex A5 / M4 SoC

iWave Systems has unveiled new microMXM system-on-modules powered by Freescale Vybrid dual core ARM Cortex-A5 @ 500Mhz and Cortex-M4 @ 167 Mhz SoC. Rainbow-G16M modules target applications that can leverage the Cortex M4 MCU for real-time tasks, and the Cortex A5 core for application processing such as industrial process control & kiosks , smart grid, medical / healthcare devices, smart connected devices, and battery operated handheld devices. Here are the module specifications: SoC – Vybrid VF6x Series Controller with ARM Cortex A5 core @ 500Mhz, and Cortex M4 core @ 167 MHz System Memory – 256 MB DDR3 (Expandable upto 1GB) Storage 256MB NAND Flash (Expandable up to 2GB) QSPI Flash (Optional) EEPROM (Optional) On Board peripherals support: On module 10/100 Ethernet PHY JTAG Header for processor (Optional) Open SDA Header (Optional) DIP Switch for boot settings (Optional) 314-pin MXM PCB Edge Connector Interfaces: 10/100 Ethernet PHY interface 2nd RMII […]

August 24, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Habey EMB-3700 Embedded Board Features AMD G-Series SoC

AMD recently announced their G-Series SoC family that combines a CPU, a GPU, and a controller hub into a single chip, as ARM has been doing for a while, and more products based on the platform are entering the marketplace. I’ve already written about Win Enterprises MB-60830 and Netboard A10 single board computers, and today I’ll introduce another option with Habey EMB-3700, a 3.5″ embedded board that targets applications such as digital signage, point-of-sale (PoS), industrial automation, machine to machine, in-vehicle telemetry, and medical technology. Habey EMB-3700 Specifications: SoC: GX-420CA quad core @ 2.0GHz (25W TDP) with Radeon HD8400E or GX-415GA quad core @ 1.5GHz (15W TDP) with Radeon HD8330E or GX-210HA dual core @ 1.0GHz (9W TDP) with Radeon HD810E System Memory – 1x 204-Pin DDR3 SODIMM, up to 4GB (ECC) RAM Storage – 2x 6Gb/s SATA 3.0 connectors Video Output: HDMI up to 1920 x 1200 VGA up […]

August 22, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

LinuxCon Europe 2013 Schedule – Web Technologies, Debugging Techniques, Wayland, and More

I’ve just received an email from the Linux Foundation saying the schedule for LinuxCon and CloudOpen Europe 2013 had been made available. The conference will take place for 3 days (October 21-23, 2013) in the Edinburgh International Conference Center, Edinburgh, United Kingdom. There will be over 100 conference sessions, and several co-located events including: Automotive Linux Summit, the Embedded Linux Conference, Gluster Workshop, KVM Forum, Tizen Summit, Xen Project Developer Summit. As I’ve recently done with LinuxCon North America 2013 and ARM TechCon 2013, I’ll make a virtual schedule with selected developer sessions using the event’s schedule builder. You may find out several sessions will also be given in LinuxCon North America. Monday – 21st of October 11:00 – 11:50 – Bluetooth Smart Devices and Low Energy Support on Linux by João Paulo Rechi Vita, INdT This presentation will cover a brief introduction on how the Bluetooth Low Energy technology […]

August 22, 2013June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$59 Iteaduino Plus ARM Linux Board Features Raspberry Pi and Arduino Compatible Headers

Iteaduino Plus is a development platform designed by ITEAD studio, a Shenzhen based company, powered by AllWinner A10 with 1GB RAM, a micro SD card slot, expansion header, etc… Overall features are very similar to the Cubieboard, but the platform is comprised of a baseboard and a CPU module. The baseboard features a 26-pin GPIO header compatible with the one on the Raspberry Pi, and you can add an expansion board to connect Arduino Shields. Iteaduino Plus specifications: SoC – AllWinner A10 Cortex A8 @ 1GHz with Mali400 GPU System Memory – 1GB DDR3 @480MHz Storage – 1x micro SD slot, 1x SATA Video Output – HDMI Connectivity – 10/100M Ethernet USB – 2x USB Host, 1x USB OTG Audio – 3.5mm Audio in and out jacks Expansion headers (see pin assignment) 2x 2×36-pin (Total 144, but not all used) – I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, […]

August 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

KVM on 64-Bit ARM with AppliedMicro X-Gene Developement Platform

Applied Micro announced X-Gene 64-Bit ARMv8 Server-on-Chip at ARM Techcon 2011, and later in 2012, they showcased Apache2 on an FPGA implementation of the chip. More recently, they showcased KVM (Kernel-based Virtual Machine) on their X-C1 hardware platform with an actual X-Gene SoC at Linaro Connect Europe 2013, and Linaro has just uploaded the video of the demo. The development board features 8 ARMv8 64-bit processors, PCI network, up to 6 SATA drives (but only one used in the demo), and they also have hardware fitted into a 1U rack. The demo below runs 4 SMP Linux virtual machines (with 2 VCPUs), including 2 ARMv7 32-bit, and 2 ARMv8 64-bit guests, running web servers concurrently on each VM using VirtIO-based network virtualization. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and […]

August 21, 2013August 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$200 Direct Insight Triton-TXEK EvalKit for iMX6 Features Freescale i.MX 6Quad Processor

With Wandboard Quad, SABRE Lite, Nitrogen6X, and UDOO, we already have some choices when it comes to low cost Freescale i.MX 6Quad development platforms. Direct Insight, a British company, has developed another called TRITON-TXEK EvalKit for iMX6 that includes the company’s Triton-TX6Q SoM, for 130 GBP (about $200). TRITON-TXEK for iMX6 Specifications: Specifications listed for the Triton-TXEK evaluation kit include: SoC – Freescale i.MX 6Quad quad core Cortex-A9 @ 1GHz with Vivante GC2000 GPU System Memory – 1GB DDR3 Storage – 128MB NAND flash + SD card slot Display – TFT panel via 40-pin LCD flat cable header Connectivity – 10/100M Ethernet USB – USB 2.0 host + mini USB 2.0 host/device Serial – RS232on D-Sub connector Audio – 3.5mm headphone jack Power Supply – 5V Dimensions – Module: 68mm × 31mm, Baseboard: Who knows… Operating temperature – -20 to 70°C Since the only easily accessible display option is the […]

August 19, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

MEN Mikro Elektronik BL50W is an Embedded PC For Wireless Applications with up to 9 Antennas

MEN Mikro Elektronik Gmbh, a German company specialized in industrial embedded boards and systems, has recently unveils BL50W, an embedded PC powered by AMD G-Series APU targeting wireless applications for transportation: trains, buses, construction and agricultural machines or airplanes. The rugged device provides nine antenna slots, with support for up to 8 SIM cards and a GPS interface. BL50W Specifications: Processor – AMD G-Series single or dual core APU from AMD T24L to AMD T56N (13 Processor options). The standard version comes with AMG G-series T48N Dual Core processor @ 1.4 GHz with AMD Radeon HD 6310 GPU System Memory – 2GB DDR3 SDRAM (4GB optional) Storage – SD card slot, mSATA slot (Up to 3Gb/s), and SATA 3.0 (Up to 6Gb/s) Graphics – Radeon HD 6310 GPU by default with dual independent display support, dual DisplayPorts, and 2560×1600 maximum resolution. Video – Dedicated hardware (UVD 3) for H.264, VC-1 […]

August 17, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Texas Instruments OMAP5432 EVM Benchmarked Against ODROID-U2, BeagleBone Black, GK802… and an Intel Core i7-2600K based PC

Texas instruments and SVTronics announced an OMAP5 evaluation board a couple of months ago. The board features OMAP5432 dual Cortex A15, dual Cortex M4 SoC, 2GB RAM, a 4GB eMMC module, USB 3.0, SATA and more. SVTronics sent a board to Linux.com, where they wrote a short review, followed by an article benchmarking the OMAP5 EVM against AllWinner A10, Freescale i.MX6, Exynos 4412 Prime, and TI Sitara platforms, namely Cubieboard, GK802, ODROID-U2, and BeagleBone Black, all running Linux. Ben Martin, the writer, also benchmarked the board against a Linux PC powered by an Intel Core i7-2600K processor (4 cores, 8 thread, clocked at 3.4GHz, with a turbo frequency up to 3.8GHz). The board used was an early version, clocked at 800MHz, and later in September, all boards will be clocked at 1.5Ghz, so for benchmarks that stress the CPU, you could expect almost double the performance. With that in mind, […]