Linux

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Texas Instruments Releases Zigbee Home Automation Gateway Reference Design Based on BeagleBone Black

Texas Instruments Releases Zigbee Home Automation Gateway Reference Design Based on BeagleBone Black

Texas Instruments has recently release a complete Linux based Zigbee home automation gateway based on BeagleBone Black development and CC2531 Evaluation Module Kit hardware which you can purchase for about $100 in total, and including Z-STACK Ubuntu gateway installer, as well as Z-STACK Home, a ZigBee Home Automation (ZHA 1.2) compliant protocol stack for the company’s CC2530 and CC2538 SoCs. I won’t go into details about the BeagleBone Black as I have already covered it into details previously. However, the hardware has slightly changed since the initial release, as the 2GB eMMC has now been replaced by a 4GB eMMC, and price has been increased to about $55. CC2531 evaluation module kit is comprised of CC2531 USB Dongle which you can connect to the USB port of a PC, or in this case a BeagleBone Black, for 802.15.4 / ZigBee applications. TI also provides CC2531 USB Firmware Library on their site to let developers […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on $37 Shenzhen Visson V5 Android TV Box Features AllWinner A20 SoC

$37 Shenzhen Visson V5 Android TV Box Features AllWinner A20 SoC

If you’re looking for a low cost dual core Android or Linux TV box or mini server, it won’t get much cheaper than Shenzhen Visson V5 powered by AllWinner A20 dual Cortex A7 SoC with 512 MB RAM, 4GB flash, as well as various port such as HDMI, Ethernet, and USB. Shenzhen Visson V5 specifications: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1 GHz + Mali-400MP2 GPU System Memory – 512 MB Storage – 4GB flash. Video & Audio Output – HDMI and AV Connectivity – 10/100M Ethernet, Wi-Fi 802.11 b/g/n USB –  2x USB host ports Misc – IR receiver, power button Power Supply – 5V/2A According to the specifications on Aliexpress, there’s also a (micro?) SD card, but I can’t find it on any of the pictures, so it’s safe to assume there isn’t any. This Android 4.2.2 box ships with a remote control, a 5V/2A […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on AMD Introduces Embedded G-Series “Steppe Eagle” SoCs and “Crowned Eagle” CPUs

AMD Introduces Embedded G-Series “Steppe Eagle” SoCs and “Crowned Eagle” CPUs

​AMD has added six new members to is Embedded G-Series family with “Steppe Eagle” SoCs comprising a CPU, GPU and I/O in a single chip, and “Crowned Eagle” CPUs that are not actually CPUs in the old sense, but SoCs comprised of a CPU and I/O chipset, and all of them also include AMD’s ARM based PSP (Platform Security Processor) built upon ARM TrustZone architecture. You may also remember AMD G-Series APUs which are comprised of a CPU and GPU, and connected to an external I/O chipset, but none of these were announced today. The six new AMD G-Series processors are as follows: “Steppe Eagle” SoCs: GX-424CC – Quad core @ 2.4 GHz with 2MB L2 cache, and a GPU @ 497MHz. DDR3-1866 support. TDP: 25W GX-412HC – Quad core @ 1.2 GHz with 2MB L2 cache, ad a GPU @ 300MHz. DDR3-1333 support. TDP: 7W GX-212JC – Dual core @ 1.2 GHz […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on EzeeCube is a Modular XBMC Media Hub with Up to 9TB Storage (Crowdfunding)

EzeeCube is a Modular XBMC Media Hub with Up to 9TB Storage (Crowdfunding)

EzeeCube is a media hub that automatically synchronizes photos, videos and contacts from your iOS and Android phones or tablets. The hardware is based on Freescale i.MX6 Dual SoC, includes a 1 TB hard drive upgradable to 9TB with 4 extra drives, can be upgraded with hardware modules, and runs a custom version of XBMC on top of Linux built with the Yocto Project. EzeeCube specifications: SoC – Freescale i.MX6 Dual with two ARM Cortex A9 cores @ 1 GHz and Vivante 3D GPU System Memory – 1GB DDR3 @ 1066MHz Storage – 4GB eMMC,  1TB 2.5″ hard drive @ 5400rpm, and SD/SDXC card slot Connectivity – Gigabit Ethernet, 802.11n Wi-Fi (2.4GHz), and Bluetooth 3.0 Video Output – HDMI 1.4 with CEC support Audio Output – HDMI and optical S/PDIF Video Containers – AVI, MPEG, WMV, ASF, FLV, MKV/MKA, QuickTime, MP4, M4A, AAC, NUT, OGG, RealMedia RAM/RM/RV/RA/RMV8, OGM, 3gp, VIVO, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Aaeon AIOT-X1000 Linux Gateway is Powered by an Intel Quark SoC

Aaeon AIOT-X1000 Linux Gateway is Powered by an Intel Quark SoC

Intel Quark SoC for low power embedded devices has been seen on platforms designed by Intel themselves, such as Intel Galileo board or Edison wearable development kit, but I had not found Quark SoC in actual products until Aaeon announced their AIOT-X1000 gateway for the internet of things running Linux on an Intel Quark X1000 SoC, and working with a Cloud Service by Asus, Aaeon’s parent company. The solution targets manufacturing, transportation, and energy applications. Aaeon AIOT-X1000 specifications: Processor – Intel Quark X1000-series SoCs @ up to 400 MHz System Memory – 1GB DDR3 800/1066 SODIMM Storage – IDE port, and micro SD slot Connectivity – 10/100M Ethernet USB 4x USB2.0 ports Serial – 1x RS-232/422/485, 1x RS-422/485 Other I/Os — I2C, GPIO, JTAG Mini-PCIe card expansion – 1x full-size and  1x half-size, allowing for WiFi, 2G/3G/LTE cellular, Bluetooth, CAN bus, ZigBee, and RFID add-on boards Power – 5V or 9-24V DC input Dimensions – 146 x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Cavium ThunderX Server SoC Features up to 48 ARM 64-bit Cores

Cavium ThunderX Server SoC Features up to 48 ARM 64-bit Cores

ARM SBSA specification for server supports up to 268,435,456 CPU cores for the second level of standardization on one or a combination of SoCs. We’re not quite up there just yet, but Cavium ThunderX is an ARM server SoC with up to 48 cores on a single chip, which is the highest number of cores I’ve ever heard of in an ARM SoC. The company created their own custom processor cores using an ARMv8 architecture license, designing an SoC complies with ARM’s Server Base System Architecture (SBSA) standard with the following key features: ARM based SoC that scales up from 8 to 48 cores with up to 2.5 GHz core frequency with 78K I-Cache, 32K D-Cache, and 16MB L2 cache. Fully cache coherent across dual sockets using Cavium Coherent Processor Interconnect (CCPI) Integrated I/O capacity with 100s of Gigabits of I/O bandwidth 4x DDR3/4 72-bit memory controllers supporting up to 1TB RAM […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 30 Comments on Jynxbox M1V2 Pure Linux XBMC Media Player Review

Jynxbox M1V2 Pure Linux XBMC Media Player Review

Theaterinabox.tv has sent me Jynxbox M1V2 TV box running XBMC Linux Gotham 13.0, and powered by Amlogic AML8726-M3 processor @ 1 GHz with 2GB Flash and 1 GB RAM. This is an upgrade of the first version featuring AML872-M1 and 512 MB RAM. I’ll go through the specs first, then show some unboxing pictures and video, and complete this post by reviewing the device by playing videos from the network and a USB flash drive, as well as going through the available add-ons in a video review. Jynxbox M1V2/M1+ Specifications Here are the specifications listed for Jynxbox M1V2 Pure Linux, aka Jynxbox M1+: SoC – Amlogic AML8726-M3 @ 1GHz with Mali-400 GPU System Memory – 1GB RAM Storage – 2GB NAND flash + micro SD card reader (up to 32GB) Video & Audio Output – HDMI up to 1080p (default: 720p) Video Codecs & Containers- MPEG 1/2/4, H.264, X264, VC-1, WMV, M2TS, TS, RMVB, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Blend Micro Arduino Board Integrates Bluetooth 4.0 Low Energy Connectivity for 25 Euros

Blend Micro Arduino Board Integrates Bluetooth 4.0 Low Energy Connectivity for 25 Euros

RedBearLab’s Blend Micro is an Arduino compatible board with Bluetooth 4.0 Low Enery (aka Bluetooth Smart) connectivity, that’s part of Arduino-at-heart, a partner program initiated by the developers of Arduino boards. It has been made to help design low power Internet-Of-Things (IoT) projects quickly and easily. Blend Micro technical specifications: MCU – Atmel ATmega32u4 @ 8 MHz with 32KB flash (4KB used by bootloader), 2.5 KB SRAM, and 1KB EEPROM. Connectivity – Bluetooth 4.0 Low Energy via Nordic nRF8001 chip USB – 1x micro USB port I/Os: Serial (Tx/Rx) I2C, SPI PWM U to 16 Digital I/Os Up to 6 Analog inputs Operating Voltage – 3.3V Input Voltage – 5V (USB), and 3.3-12V (VIN) Power Consumption – 2mA (average – using Interrupt mode) Dimensions – 43.6 x 18.4 x 4.3mm Weight – 4g The specs are very similar to BLEDuino, except it’s slightly smaller. Blend Micro can communicate with BLE […]

UP 7000 x86 SBC