Linux News - Page 352 of 457 - CNX Software

February 2, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

H88 HummingBird Development Board Powered by Allwinner A80 Comes with 4GB RAM, Built-in GPS, 4G LTE Support

Merrii Technology is having some fun churning out Allwinner A80 development boards, and after A80 OptimusBoard, H8 Hummingbird, here comes H88 HummingBird. The new board is somewhat similar to H8, but is quite larger, and features 4GB RAM, built-in GPS, and a few other goodies. H88 HummingBird specifications: SoC – AllWinner A80 octa-core processor with 4x Cortex 15, 4x Cortex A7 cores in big.LITTLE configuration with Imagination Technologies PowerVR GC6230 GPU compliant with OpenGL ES 3.0/2.0/11, OpenCL 1.1, and DirectX 9.3 System Memory – 4GB DDR3 Storage – 8GB internal storage (Hynix H27UCG8T2BTRBC), micro SD slot up to 32 GB Video Output/ Display Interfaces HDMI 1.4 up to 4K UHD resolution RGB/LVDS interface EDP LCD + TP interface MIPI LCD interface VGA output Audio – HDMI, headphone jack,LINE-IN, Camera I/F – Parallel and MIPI CSI interface. Integrated 16MP camera Connectivity – Gigabit Ethernet (Realtek RTL8211D/E), dual band Wi-Fi 802.11 b/g/n […]

January 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Variscite Introduces TI Sitara AM437x SoM with Bluetooth and Wi-Fi

News about Texas Instruments Sitara AM437x processors first surfaced in 2012, before being officially announced last summer. Beside TI’s own development kits, I had not seen any hardware based on the company’s Cortex A9 industrial processor, but Variscite has now unveiled their VAR-SOM-AM43 systems-on-module (SoM) powered by AM4376 , AM4378, or AM4379 SoCs. VAR-SOM-AM43 specifications: SoC – Texas Instruments AM437x single core ARM Cortex A9 processor @ 1.0GHz: AM4376 – No GPU, 4x PRU @ 200 MHz AM4378 – PowerVR SGX530 GPU, 4x PRU @ 200 MHz AM4379 – PowerVR SGX530 GPU, 4x PRU @ 200 MHz, and EtherCAT slave support System Memory – 256MB to 1GB DDR3 Storage – 0 to 512MB SLC NAND flash, and 4GB to 32GB eMMC flash b module. 3x SD/MMC via edge connector Display Interfaces – 24-bit RGB interface up to 1400×1050 resolution; 4/5-wire resistive touch support Connectivity – 10/100/1000 Mbps Ethernet PHY + […]

January 30, 2015January 30, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 15.01 Release with Linux 3.19 and Android 5.0

Linaro has just announced the first release of the year with Linux 3.19-rc3 (baseline), Linux 3.10.65 and 3.14.29 (LSK), Android 5.0.2, and Ubuntu Linaro Utopic. Changes seem to have focused on ARM, Qualcomm, and HiSilicon hardware platforms such as Juno, and IFC6410, and some work has been done on Debian ARM64 rootfs. Here are the highlights of this release: Linux Linaro 3.19-rc5-2015.01 GATOR topic updated to version 5.20.1 builddeb topic: fixes for the dtb files location changes in 3.19 (vendor subdir introduced) updated integration-linaro-vexpress64 topic by ARM LT (FVP Base and Foundation models, and Juno support) updated topic from Qualcomm LT (IFC6410 board support) updated topic from HiSilicon LT (Hi36xx, HiP04, and X5HD2 families support) updated LLVM topic (uses the community llvmlinux-latest branch) Included ILP32 patch set v3 rebased on 3.19-rc5. Initial tests using syscalls LTP tests are done: msgctl07 stalls when using ILP32 userland (no stall with LP64 userland). […]

January 30, 2015January 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Online Labs pBox (C1 Node) is a mini ARM Server with 4 Gigabit Ethernet Ports, mSATA and mPCIe Slots

Online Labs, a subsidiary of Iliad (free), recently launched hosting services with dedicated ARM servers based on Marvell processor with modules they call C1. The company has decided to design a baseboard (pBox) for C1 module, and, as I understand it, plans to sell it to the public. It’s an exciting development for those who are looking for affordable and tiny purpose built Linux ARM servers. Preliminary C1 Node / pBox mini server specifications (based on C1 specs and bits of information gathered online): SoC – Marvell Armada 370/XP quad core ARMv7 processor @ up to 1.2 GHz System Memory – 2GB RAM Storage – 256 MB NAND flash + mSATA slot + eSATA port + micro SD slot Connectivity – 4x Gigabit Ethernet ports USB – 1x micro USB port Expansion – mini PCie, 1x 20-pin header for expansion (no details yet) Debugging – 20-pin JTAG connector Power Supply […]

January 29, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

FOSDEM 2015 Schedule – January 31 – February 1 2015

FOSDEM (Free and Open Source Software Developers’ European Meeting) takes place every year during the first week-end of February. This year the developer-oriented event expects to bring over 5000 geeks to share ideas and collaborate on open source projects. Contrary to most other events, it’s free to attend, and you don’t even need to register, just show up. FOSDEM 2015 will take place on January 31- February 1 in Brussels. There will be 551 sessions divided into 5 keynotes, 40 lightning talks, 6 certification exams, and with the bulk being developer rooms and main tracks, divided into 7 main tracks this year: Languages, Performance, Time, Typesetting, Hardware, Security and Miscellaneous. I’m not going to attend, but it’s still interested to see what will be talked about, and I’ve concocted my own little virtual program out of the main tracks and developers’ rooms. There’s a few minutes overlap between some talks […]

January 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Linaro Connect Hong Kong 2015 Schedule and Demos

Linaro Connect Hong Kong 2015 will take place on February 9 – 13,2015 in Hong Kong, and the organization has released the schedule for the five days events with keynotes, sessions, and demos. Each day will start with the keynote including speakers such as: George Grey, Linaro CEO, who will welcome attendees to Linaro Connect, and provide an update on the latest Linaro developments Jon Masters, Chief ARM Architect, Redhat, who will present Red Hat update and latest ARMv8-A demonstrations Dejan Milojicic, Senior Researcher & Manager, HP Labs Bob Monkman, Enterprise Segment Marketing Manager, ARM, will discuss about the impact of ARM in next generation cloud and communication network infrastructure Greg Kroah-Hartman, Linux Foundation Fellow, will introduce the Greybus Project (Linux for Project Ara modular phones) Warren Rehman, Android Partner Engineering Manager, Google The agenda also features sessions covering Android, ARMv8-A, Automation & Validation, Digital Home, Enterprise Servers, LAVA, Linux […]

January 26, 2015March 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

X29 Intel Celeron J1800 / J1900 mini PC Sells for $125 and Up

Today, somebody asked me to test 4K output on Intel Atom Z3735F, but I can’t do that since the platform only supports 1080p. As I just posted my unboxing of MeLE PCG03 mini PC, I noticed several ICs where added for extra functionalities, and people also started to complain about lack of Gigabit Ethernet, Fast Ethernet via a USB bridge, no USB 3.0, and no SATA. That’s what happens when you use a Tablet SoC in a mini PC, but if you’re ready to pay a little more, you could still get a mini PC with a proper desktop processor (Bay Trail-D) including SATA, USB 3.0, and Gigabit Ethernet (maybe) for about $125 (shipped) with X29-J1800 computer powered by Intel Celeron J1800 (10W TDP). That’s the price for the barebone system without RAM or storage, and if you want a complete system with 32GB eMMC and 4GB RAM the price […]

January 26, 2015January 26, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Linux 3D GPU Acceleration Demo on Rockchip RK3288 based Firefly Board

Several devices and development boards based on Rockchip RK3288 processor already support Linux, usually with images based on Ubuntu, including Ugoos UM3 / UT3, Open Hour Chameleon, and Firefly-RK3288 among others. What these images lack however, is support for 2D and 3D graphics acceleration with the GPU, and hardware video decoding/encoding with the VPU. But Jas-hacks has made some progress with 3D graphics support. He has managed to add GPU acceleration via EGL/OpenGL ES bringing 3D acceleration to the platform, but 2D support is not there yet, meaning X11 still heavily relies on software rendering. But the implementation is still good enough to run the usual es2gears and glmark2-es2 benchmarks. as well as some WebGL demos in Chromium. Performance is currently underwhelming, with 50 points in glmark-es2, even a bit lower than the score (54 points) I got with ODROID-X board powered by Exynos 4412 SoC with a Mali-400MP4 GPU, […]