Linux News - Page 344 of 457 - CNX Software

April 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

VX2 Celeron J1800 / J1900 mini PCs with 500GB Hard Drive Sell for $180 and Up (Promo)

CSQ CSW9 is an Intel Celeron J900 based mini PC with a 500GB HDD that normally sells for a little over $200 on Aliexpress once shipping is included. But today, as I found a list of Geekbuying Coupons via Google+, I noticed the device was listed on Geekbuying as VX2, and both Celeron J1800 and J1900 versions were available for respectively $179.99 and $189.99 after applying MYMVECMY coupon, which looks like a decent deals since a 500GB 2.5″ SATA drive costs about $45. Specifications listed on Geekbuying are mostly the same as for CSQ CSW9 except some difference highlighted in bold or stricken-through when removed: SoC – Intel Celeron J1800 dual core processor @ 2.41 GHz (base) / 2.58 GHz (burst), or J1900 Quad core processor @ 2.0 GHz (base) / 2.41 GHz (Burst) with Intel HD graphics (10W TDP) System Memory – 2 GB DDR3L 1066/1333 MHz Storage – […]

April 8, 2015October 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Inforce 6501 Micro SOM is a Tiny Module with Qualcomm Snapdragon 805 Processor

Inforce Computing has now launched Inforce 6501 micro system-on-module (SoM) based on the same Qualcomm Snapdragon 805 processor found on their Inforce 6540 pico-ITX single board computer. The module measures just 50×28 mm, and integrates up to 3 GB RAM, up to 16 GB eMMC, and Bluetooth, Wi-Fi and GPS connectivity. Inforce 6501 specifications: SoC – Qualcomm Snapdragon 805 (APQ8084) quad core Krait 450 processor up to 2.7 GHz with Adreno 420 GPU, and Hexagon DSP V50 up to 800 MHz System Memory – 2GB to 3GB PoP LPDDR3 @ 800 MHz; 2×64-bit 26.5GB/s memory bus Storage – 4GB eMMC v4.5/v5.0, with options up to 16GB Connectivity – Bluetooth 4.1 & 2×2 dual band 802.11 b/g/n/ac Wi-Fi (QCA6174), and GPS (QCA1530) Peripherals and I/O via two 100-pin SoM connectors: Video / Display – 1x HDMI 1.4a, 2x MIPI-DSI (4-lane) & touch screen, Audio 4x Line out, 3x Mic-in, 1x headphone […]

April 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Kodi 14.2 Linux Tested on MeLE PCG03 with Ubuntu 15.04

I’ve already tested Kodi 14.1 on MeLE PCG03 running Windows 8.1, with the Intel Atom Z3735F device performing greatly for 1080p videos, working DTS and Dolby pass-through (no HD Audio though) and automatic frame rate switching working at all frequencies I tested. Later I installed Lubuntu 15.04 on the mini PC, and I had planned to test Kodi 14.x in Linux to compare the performance in Windows 8.1. Unfortunately, I did not manage to mak HDMI audio, nor the audio jack work in Linux, so instead I purchased a cheap USB sound card from DealExtreme for around $2 US, and connected a pair of USB powered speakers to enable audio output. The USB sound card performs pretty well, and out of the 80 or so videos I used for testing, only one had some saturation issues likely due to the sound card itself. I installed Kodi 14.2 using the recommended […]

April 6, 2015February 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

PCOMnetA5 is a Small Dual Ethernet Board Powered by Freescale Vybrid Processor

F&S Elektronik Systeme has introduced a credit card sized industrial board powered by Freescale Vybrid single core Cortex A5 SoC featuring two Ethernet ports, support for RGB panels with resistive touch, and various I/Os headers for USB, UART, CAN and so on. The board is comprised of a baseboard and the company’s PicoMODA5 module with the following combined specifications: SoC – Freescale Vybrid Cortex-A5 processor @ 500 MHz with 512KB cache, NEON instructions and GPU System Memory – 256 MB RAM Storage – 128 MB Flash + µSD slot Display – 18-bit RGB LCD with 4-wire analog resistive PCAP-Touch via I2C Connectivity – 2x 10/100M Ethernet with IEEE1588, optional WiFi USB – 2x USB 2.0 host ports via header, 1x micro USB 2.0 device port Other I/Os 2x CAN RS232/RS485 1x I2C, 1x SPI 7x Digital I/O Supply Voltage – +5V DC/ ±5% Dimensions – 80x50mm Operating Temperature Range – […]

April 6, 2015April 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Intel Compute Stick is up for Pre-order for $110 and Up (USA Only)

Intel Compute Stick is finally available for pre-order on US based online merchants such as Amazon and Newegg with prices starting at $109.99 and up excluding shipping and two versions with either Linux or Windows 8.1. Both versions of the device share most of the specifications: SoC – Intel Atom Z3735F Quad-Core “Bay Trail” processor @ 1.33 GHz (1.83 GHz burst frequency) and Intel HD Graphcis System Memory – 2 GB DDR3 (Windows) or 1 GB DDR3 (Linux) Storage – 32 GB eMMC (Windows) or 8 GB eMMC (Linux) + micro SD slot Video & Audio Output – HDMI 1.4a Connectivity – 802.11 b/g/n Wi-Fi and Bluetooth 4.0 USB – 1x USB 2.0 port, 1x micro USB port for power Misc – Power button Power Supply – 5V/2A via micro USB port. Dimensions and Weight – N/A The Windows 8.1 model is codenamed BOXSTCK1A32WFCR, comes with 2GB RAM and 32GB […]

April 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

ESP8266 Wi-Fi Module is Now Supported in Arduino IDE

ESP8266 revolutionized the IoT world by offering an ultra low cost Wi-Fi solution either standalone or connected to a micro-controller board via SPI or UART. There are plenty of tutorials on the web to play with the Wi-Fi module, but it’s only recently an Arduino IDE has added support for ESP8266. If you want to try it, you can download the binary for Linux, Windows, or Mac OS X. Since my computer is running Ubuntu 14.04, I download and extracted arduino-1.6.1-linux64.tar.xz to install it in my PC. Now simply run the arduino script to start the IDE, and select to Tools->Board->Generic ESP8266 board. I don’t own an ESP8266 module myself, but Olimex tried it on their ESP8266-EVB: They connected a serial debug board and selected Tools->Port->/dev/ttyUSB0 in the IDE Selected Tools-> Programmer->esptool Loaded Blink example, and modified it to turn on and off the relay on their evaluation board. If […]

April 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Kodi 14.2 Final and Kodi 15 Alpha 2 Released

Kodi developers have recently announced two release for Kodi: the stable version of Kodi 14.2 Helix, which should be the last Kodi 14 release, and Kodi 15 Alpha 2 Isengard with some interesting new features. Since Kodi 14.2 is a minor release, no new features have been added, but they fixed several bugs: Application stopped responding on Windows Gap-less playback on MP3 Playback of rtmp protocol Scanning of newly added episodes Fix multipath source scanning Loading external subtitles in some cases packaging of PIL module on Android. This fixes some script error when using weather add-on Fix video playback on all platform after refresh rate change Various bugs that were present in PVR add-ons. Save weather location Fix filtering of foreign add-ons ftps handling Use LastWrite instead of ChangeTime for file system on Windows As usual, you can download the release via Kodi download page for Windows, Linux. Mac OS […]

April 2, 2015September 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Scaleway Provides Dedicated ARM Servers for 10 Euros per Month, 0.02 Euro per Hour

Earlier this year, Online Labs launched a beta hosting program using custom-designed C1 dedicated servers powered by Marvell Armada 370/XP quad core processor. The company has now launched a commercial service called Scaleway providing hosting service on these baremetal servers for 9.99 Euros per month, or 0.02 Euro per hour, as well as a “Infinite Storage” service with 1GB data for 0.02 Euros per month. Here are the details of the 10 Euros plan: Server based on Marvell Armada 370/XP quad core ARMv7 processor Memory – 2GB Memory Storage – 50GB SSD Disk 1x Reserved public IPv4 200Mbit/s – Unmetered bandwith Operating Systems – Ubuntu, Debian, Fedora, ArchLinux ARM. Docker supported. That’s not a VPS, but a dedicated server. For reference, I currently pay around $20 per month (Linode) for a server with an Intel Xeon E5-2680 dual core processor with 2 GB RAM and 50 GB SSD storage, and 3 […]