Linux

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Edge video processing platform features NXP i.MX 8M Plus, i.MX 93, or i.MX 95 SoC, supports up to 23 camera types

Edge video processing platform features NXP i.MX 8M Plus, i.MX 93, or i.MX 95 SoC, supports up to 23 camera types

DAB Embedded AquaEdge video processing platform

DAB Embedded AquaEdge is a compact computer based on NXP i.MX 8M Plus, i.MX 93, or i.MX 95 SoC working as an edge video processing platform and supporting 23 types of vision cameras with resolution from VGA up to 12MP, and global/rolling shutter. The small edge computer features a gigabit Ethernet RJ45 jack with PoE to power the device. It is also equipped with a single GSML2 connector to connect a camera whose input can be processed by the built-in AI accelerator found in the selected NXP i.MX processors. Other external ports include a microSD card slot, a USB 3.0 Type-A port, and a mini HDMI port (for the NXP i.MX 8M Plus model only). DAB Embedded AquaEdge specifications: SoC / Memory / Storage options NXP i.MX 8M Plus CPU – Quad-core Cortex-A53 processor @ 1.8GH, Arm Cortex-M7 real-time core AI accelerator – 2.3 TOPS NPU VPU Encoder up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Mekotronics R58-PTZ video surveillance/live streaming embedded computer features a PTZ camera, two HDMI input ports

Mekotronics R58-PTZ video surveillance/live streaming embedded computer features a PTZ camera, two HDMI input ports

Mekotronics R58-PTZ embedded computer with pan and tilt camera

I swear it’s not an AI-generated picture of a device, but the Mekotronics R58-PTZ is real and just another unusual Rockchip RK3588 hardware platform from the company that’s an embedded computer with a 3-inch display on the front panel and a PTZ (Pan-Tilt-Zoom) camera placed on top. Mekotronics describes it as a live-streaming box designed for video surveillance, so I assume its main use case is to leverage to built-in 6 TOPS NPU for live streaming with some real-time effect and/or surveillance applications detecting persons, masks, etc… especially it also offers two HDMI inputs for extra cameras. Mekotronics R58-PTZ specifications: SoC – Rockchip RK3588 octa-core processor with CPU – 4x CortexA76  cores @ up to 2.4 GHz, 4x CortexA55 core @ 1.8 GHz GPU – Arm Mali-G610 MP4 GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.2, Vulkan 1.2 Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 20 Comments on DeepSeek shown to run on Rockchip RK3588 with AI acceleration at about 15 tokens/s

DeepSeek shown to run on Rockchip RK3588 with AI acceleration at about 15 tokens/s

Rockchip RK3588 DeepSeek R1 NPU acceleration

DeepSeek R1 model was released a few weeks ago and Brian Roemmele claimed to run it locally on a Raspberry Pi at 200 tokens per second promising to release a Raspberry Pi image “as soon as all tests are complete”. He further explains the Raspberry Pi 5 had a few HATs including a Hailo AI accelerator, but that’s about all the information we have so far, and I assume he used the distilled model with 1.5 billion parameters. Jeff Geerling did his own tests with DeepSeek-R1 (Qwen 14B), but that was only on the CPU at 1.4 token/s,  and he later installed an AMD W7700 graphics card on it for better performance. Other people made TinyZero models based on DeepSeekR1 optimized for Raspberry Pi, but that’s specific to countdown and multiplication tasks and still runs on the CPU only. So I was happy to finally see Radxa release instructions to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on OpenWrt 24.10 released with Linux 6.6, TLS 1.3 by default, and 1970 supported devices

OpenWrt 24.10 released with Linux 6.6, TLS 1.3 by default, and 1970 supported devices

OpenWrt 24.10

OpenWrt 24.10 open-source lightweight Linux operating system for routers has just been released. It’s been upgraded to Linux 6.6 from Linux 5.15 in OpenWrt 2023.05, supports TLS 1.3 by default, improves support for WiFi 6 (802.11ax), and adds initial support for WiFi 7 (802.11be). After over one year of work since the release of OpenWrt 23.05, OpenWrt 24.10 adds over 5400 commits, and the total number of supported devices is now close to 2,000 at 1,970. It’s also the first stable release supporting OpenWrt One, the router directly designed by OpenWrt developers in collaboration with Banana Pi. OpenWrt 24.10 highlights: TLS 1.3 support in default images with MbedTLS 3.6 Activate POSIX Access Control Lists and file system security attributes for all file systems on devices with big flash sizes. Needed by docker. Note this is not enabled for all targets with the small_flash feature flag, including ath79/tiny, bcm47xx/legacy, lantiq/ase, lantiq/xrx200_legacy, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on iWave Systems iW-RainboW-G54S credit card-sized SBC features an STM32MP133/MP135 OSM Size-S module

iWave Systems iW-RainboW-G54S credit card-sized SBC features an STM32MP133/MP135 OSM Size-S module

iW-RainboW-G54S credit card-sized OSM SBC

iWave Systems iW-RainboW-G54S is a credit card-sized SBC fitted with an OSM Size-S (30x30mm) system-on-module based on STM32MP133 or STM32MP135 Cortex-A7 SoC with up to 1GB RAM, and up to 128GB flash. Interfaces include a Gigabit Ethernet port, a USB Type-A port, an 18-bit RGB LCD display interface, and three 100-pin high-density connectors for additional I/Os. The iW-RainboW-G54S SBC is designed for industrial applications with a temperature range of -40 to +85°C. While it’s fitted with an OSM Size-S module, we’ll also notice the carrier board has a footprint for OSM Size-M (45x30mm) and OSM Size-L (45x45mm) modules indicating it will be used with other OSM modules in the future. iWave Systems iW-RainboW-G54S specifications: System-on-Module – iW-RainboW-G54M SoC (one or the other) STMicro STM32MP133 single-core Cortex-A7 with or without Secure boot + Cryptography; for headless applications STMicro STM32MP135 single-core Cortex-A7 with or without Secure boot + Cryptography; supports LCD-TFT parallel […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on OpenWISP open-source solution facilitates the management of OpenWrt router fleets

OpenWISP open-source solution facilitates the management of OpenWrt router fleets

OpenWisp OpenWrt router management platform

Last month, I wrote about the WL-AC1000 AP controller, a hardware-based solution to monitor fleets of routers, and wondered why the company (Wallys) did not provide a software solution instead. It was pointed out to me that software AP controller solutions for OpenWrt routers do exist, but they looked not mature. After a quick search, I found OpenWISP described as an “open-source solution for efficient IT network deployment, monitoring & management” designed for OpenWrt Linux routers. OpenWISP allows organizations with several routers to manage them in a centralized location, get alerts when issues occur, upgrade the firmware of multiple routers with a few clicks, create users with permissions to access specific routers, and so on. OpenWISP Features: Configuration Templates – Manage device settings by defining reusable configuration templates that apply updates system-wide with a single change. Automatic Provisioning – Connect and configure new devices with zero-touch auto registration for rapid […]

Posted on by Sponsored Post - No Comments on ModBerry 500 CM5: A Leap Forward in Industrial IoT Automation (Sponsored)

ModBerry 500 CM5: A Leap Forward in Industrial IoT Automation (Sponsored)

MODBERRY 500 CM5

The ModBerry 500 series from TECHBASE has long been a staple in the industrial IoT automation market, known for its reliability and versatility. The upcoming ModBerry 500 CM5, integrates the powerful Raspberry Pi Compute Module 5 (CM5), bringing significant enhancements and maintaining compatibility with previous versions. Compatibility with Raspberry Pi Compute Module 5 The ModBerry 500 series is fully compatible with the Raspberry Pi Compute Module 5, ensuring seamless integration and enhanced performance. This compatibility allows users to leverage the advanced features of the CM5, including improved processing power and expanded memory options while maintaining the robust and flexible platform that ModBerry users have come to rely on. Advantages of the ModBerry 500 CM5 in IoT Automation The ModBerry 500 series has established itself as a leading solution in the IoT automation market due to its reliability with proven track record in various industrial applications, ensuring consistent performance in harsh […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Chipsee introduces 7-inch and 10.1-inch industrial panel PCs powered by Raspberry Pi CM5

Chipsee introduces 7-inch and 10.1-inch industrial panel PCs powered by Raspberry Pi CM5

Raspberry Pi CM5 Panel PCs

Chipsee has introduced three new panel PCs powered by the Raspberry Pi Compute Module 5 (CM5), namely the EPC-CM5-070, PPC-CM5-070, and PPC-CM5-101, designed for automation, manufacturing, and industrial applications. The EPC-CM5-070 is a compact 7-inch open frame embedded panel PC with armored glass, the PPC-CM5-070 is also a 7-inch panel PC but with VESA/panel mounting and a rugged metal enclosure, and the PPC-CM5-101 features a 10.1-inch touchscreen display and support for an extended temperature range. Chipsee EPC-CM5-070 – A 7-inch open frame panel PC Specifications: SoM – Raspberry Pi CM5 with Broadcom BCM2712 quad-core Cortex-A76 SoC, 4GB or 8GB RAM, 32GB eMMC flash Storage MicroSD card slot M.2 M-Key 2230/2242 (PCIe Gen2 x1) socket for NVMe SSD Display – 7-inch display with 1024×600 resolution, 5-point capacitive touchscreen, 500 NIT brightness Video Output – HDMI port Audio 3.5mm audio out jack Internal 2W Speaker Buzzer Camera – Optional support Networking Gigabit […]

UP 7000 x86 SBC