kernel

Posted on by Jean-Luc Aufranc (CNXSoft) - 50 Comments on Amlogic S905 Source Code Published – Linux, U-Boot, Mali-450 GPU and Other Drivers

Amlogic S905 Source Code Published – Linux, U-Boot, Mali-450 GPU and Other Drivers

Amlogic has an open linux website where they regurlarly release GPL source code, and with Amlogic S905 devices coming to market, they’ve released a few tarballs at the beginning of the month including Linux 3.14 source code, U-boot source code, and Mali-450MP GPU kernel source code (obviously not userspace), as well as some other drivers for WiFi, NAND flash, PMU, TVIN, etc… Let’s get to the download links: Linux 3.14.29 source code U-boot 2015.01 GPU drivers for ARM Mali-450MP Broadcom and Realtek Wifi drivers and firmware (November 4, 2015) can be found @ http://openlinux.amlogic.com:8000/download/ARM/wifi/. Other kernel modules (November 4, 2015) @ http://openlinux.amlogic.com:8000/download/ARM/modules/. I quickly tried to build the Linux source. If you’ve never build a 64-bit ARM kernel or app before, you’ll fist need to install the toolchain. I installed the one provided with Ubuntu 14.04:

Now extract the tarball and enter the source directory:

At first I […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Raspberry Pi’s VideoCore 4 GPU Driver Added to Linux Mainline in Kernel 4.4

Raspberry Pi’s VideoCore 4 GPU Driver Added to Linux Mainline in Kernel 4.4

While your x86 and AMD64 computer will usually boot with Linux mainline without issues, most ARM boards and device won’t, and many of the ones that do boot only support headless mode, and limited functionalities. The Raspberry Pi had been supporting HDMI output with a simple framebuffer for a while, but a developer working on the Videocore 4 (VC4) GPU found inside Broadcom BCM2835 and BCM2836 processors, has recently submitted a patchset to add VC4 GPU to Linux mainline that should make it to Linux 4.4. The commit message does mention some features are still missing, but it’s a start: This pull request introduces the vc4 driver, for kernel modesetting on the Raspberry Pi (bcm2835/bcm2836 architectures). It currently supports a display plane and cursor on the HDMI output. The driver doesn’t do 3D, power management, or overlay planes yet. Via Golem and Sanders. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on Linaro Releases the First (Alpha) Version of the 96Boards Reference Software Platform

Linaro Releases the First (Alpha) Version of the 96Boards Reference Software Platform

Linaro’s 96Boards initiative was launched at the beginning of the year with Hikey board, and beside the hardware specifications, 96Boards also has some software requirements that include support for “bootloader (open source), accelerated graphics support (binary or open source), a Linux kernel buildable from source code based from mainline, or the latest Google-supported Android kernel version, or the last two LTS kernels, and one of more of the following operating systems: Android, Debian/Ubuntu, Fedora/Red Hat, or an OpenEmbedded/Yocto build of a Linux distribution”. In order to achieve this goal, Linaro introduced the Reference Software Platform for 96Boards, and they’ve now pushed the first Alpha release for Hikey and DragonBoard 410c boards. The release includes a bootloader, the Linux kernel, Debian and AOSP with firmware, source code, and documentation. Some highlights of the Reference Software Platform 15.10 Alpha release include: CE Debian RPB (Reference Platform Build) Debian 8.2 “Jessie” Linux 4.3 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linux 4.3 Release – Main Changes, ARM and MIPS Architectures

Linux 4.3 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.3 last week-end: So it *felt* like the last week of the rc series was busy, to the point where I got a bit worried about the release. But doing the actual numbers shows that that really was just my subjective feeling, probably due to the kernel summit and travel back home from Korea. It wasn’t actually a particularly busy week, it’s just that the pull requests were more noticeable in the last couple of days. We had a network update and a late fix for a x86 vm86 mode bug introduced by the vm86 cleanups, but other than that it’s just a collection of various small one-liners all over. Ok, the vm86 mode thing was a one-liner too, it was just slightly more nerve-wracking because it looked scarier than it was before people (Andy) figured out what was going on. The changes from rc7 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Linux Kernel Mainline Status of Mobile SoCs Presentation at Linaro Connect SF015

Linux Kernel Mainline Status of Mobile SoCs Presentation at Linaro Connect SF015

Linaro Connect San Francisco 2015 is taking place this week, and several 96Boards have been presented including LeMaker Hikey and Qualcomm DragonBoard 410c, both of which will finally be available by the end of the year. But there are also many technical presentation and discussions that are uploaded to LinaroOnAir Youtube account, and they’ve greatly improved video and audio quality compared to the past, with presentation slides also available on Slideshare. I’ve just watched one of the session entitled “Kernel Mainline Status of Mobile Chipsets” by Tim Bird, Sony Mobile. Also the talk focus on mobile SoC, it’s also relevant to other consumer electronics products, and some embedded systems. The presentation states the extend of the issues, shares comparisons between the vendor device tree and mainline, and explains how developers can participate, with the talk ending with a discussion within the group of attendees. Here’s a summary of some of […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Linux 4.2 Release – Main Changes, ARM and MIPS Architectures

Linux 4.2 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.2 last Sunday: So judging by how little happened this week, it wouldn’t have been a mistake to release 4.2 last week after all, but hey, there’s certainly a few fixes here, and it’s not like delaying 4.2 for a week should have caused any problems either. So here it is, and the merge window for 4.3 is now open. I already have a few pending early pull requests, but as usual I’ll start processing them tomorrow and give the release some time to actually sit. The shortlog from rc8 is tiny, and appended. The patch is pretty tiny too. Go get it, Linus Some notable changes made to Linux 4.2 include: File systems New features for F2FS including per file encryption CIFS support SMB 3.1.1 (experimental) Cryptography – Jitter Entropy Random Number Generator, Chacha20 stream cipher and Poly1305 authentication (RFC7539),New RSA implementation. See lwn.net […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linaro 15.07 Release with Linux 4.2 and Android 5.1

Linaro 15.07 Release with Linux 4.2 and Android 5.1

Linaro 15.07 has been released with Linux 4.2-rc3 (Baseline), Linux 3.10.83, 3.14.45 and 3.18.17 (LSK), and Android 5.1.1_r8. The Linux kernel got various bug fixes, and a power reduction technique has been implemented for Qualcomm processor. Progress has been made to boot Android with UEFI on Hikey board, and work is still on-going on 96boards including Hisilicon Hikey, Qualcomm DragonBoard 410c, and an upcoming and yet-to-be-formally-announced Marvell PXA1928 board called Helium. Highlights of this release: Linux Linaro 4.2-rc3-2015.07 linaro-android topic updated to 4.2-rc3 and recent AOSP/android-3.18 included GATOR version 5.21.1 llct-misc-fixes topic: “HACK: of: Limit FDT size for CRC check on arm64” has been dropped. FVP model was the last target to require this hack, but the new FVP firmware doesn’t need it anymore updated integration-linaro-vexpress64 topic by ARM LT: Versatile Express TC2 support is back, HDLCD display now works on TC2, the topic will be renamed to integration-linaro-vexpress next […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Linaro 15.06 Release with Linux 4.1 and Android 5.1

Linaro 15.06 Release with Linux 4.1 and Android 5.1

Linaro 15.06 has been released with Linux 4.1-rc8, Linux 3.10.80 and 3.14.44 (LSK), and Android 5.1.1. Highlights of this release: Linux Linaro 4.1-rc8-2015.06 linaro-android topic updated to 4.1-rc8 and recent aosp/android-3.18 included GATOR version 5.21.1 updated integration-linaro-vexpress64 topic by ARM LT Linaro builds of AOSP 15.06 is released CI bring up: setup AOSP master build on Emulator implemented boot-to-gui test for Emulator CI bring up: setup AOSP 5.0 headless build for APM X-Gene Mustang Linaro OpenEmbedded 2015.06 updated linux-linaro to ll-20150616.0 (based on 4.1-rc8) updated linux-linaro-stable to 3.10.79 workaround meta-virtualization breakage upstreaming fixed bootimg.bbclass to work with all kernel image types imported xorriso v1.4.0 from luvOS cloud-image-*: catch up with OE-core class rename Linaro Ubuntu 15.06 – updated packages: fvp-pre-boot (FVP firmware), LSK 3.10.79/3.14.44/3.18.16 and linux-linaro 4.1-rc8 kernels CI bring up: uprobes/systemtap enabled build Visit https://wiki.linaro.org/Cycles/1506/Release for a list of known issues, and further release details about the LEB, LMB […]

Exit mobile version
UP 7000 x86 SBC