jelly bean News - Page 8 of 24 - CNX Software

June 22, 2013February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

GEAK Watch is an Android 4.1 Smartwatch Packed with Features

Smartwatches have been available since 2011, in different formats, most of the time as a smartphone companion such as Pebble, or sometimes with slightly more powerful hardware running Android 2.3. one example being the I’m Watch. The GEAK Watch goes a step further for a relatively powerful Ingenic JZ4774 MIPS processor clocked at 1 GHz, Android Jelly Bean, WiFi 802.11b/g/n, Bluetooth 4.0, NFC…, and the ability to install apps directly from an app store. GEAK Watch hardware specifications: SoC- Ingenic JZ4774 processor @ 1GHz System Memory – 512MB RAM Storage – 4GB NAND Flash Display – 1.55″ LED capacitive touch screen (OGS) with 240 × 240 resolution Connectivity: WiFi 802.11 b/g/ n Bluetooth 4.0 NFC/GPS/FM Sensors – G-Sensor, Gyroscope, and Geomagnetic sensors Battery – 330mAh lithium polymer battery The watch is water-resistant (IP3X), enables heartbeat and blood pressure monitoring (maybe with external Bluetooth hardware), can be used as a pedometer, and […]

June 22, 2013June 22, 2013 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

$70 Cubot GT72 Android “4.2” Smartphone Powered by Mediatek MT6572

Mediatek MT6572 is a new dual core Cortex A7 processor with a Mali-400 GPU, as well as a HSPA+/TD-SCDMA modem. This SoC announced last month, is now starting to show up in low cost smartphones such as Cubot GT72. The phone is said to run Android 4.2.2, comes with a 4″ display, and 256MB RAM, and 512MB flash. Here are the specifications of this phone: SoC – Mediatek MTK6572 dual core cortex A7 @ 1.2GHz + Mali-400 GPU System Memory – 256MB RAM Storage – 512MB Flash + micro SD card slot (up to 16 GB) Display – 4.0″ TFT capacitive (2 points) touch screen (800×480) with 260K colors Connectivity – Wi-Fi 802.11 b/g, Bluetooth 2.0, built-in GPS Network – GSM 900/1800MHz, dual SIM card slot. Camera – 3MP rear camera with flash light, and 2MP front camera Audio – 3.5mm earphone jack Misc – Gravity sensor, FM Radio Battery – […]

June 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Kaiboer F4 Rockchip RK3188 Powered Set-top Box with Two External Wi-Fi Antennas

We’ve got a another full-sized Android set-top box featuring Rockchip RK3188 quad core processor, this time with not one, but two external Wi-Fi antennas, as well as the usual 2GB RAM, and Android 4.2 operating system. Here are the specifications of the device: SoC – Rockchip RK3188 up to 1. 8 GHz with Mali-400 MP4 GPU System Memory – 2GB DDR3 Storage – 8 to 16GB Flash + 1x SD card Video Output – HDMI, and AV Audio Output – HDMI, AV, and optical S/PDIF Connectivity – 10/100M Ethernet, and Wi-Fi 802.11 b/g/n with 2 external Wi-Fi antennae USB – Micro USB OTG + 4x (or is it 2x?) USB host ports Power & reset buttons The device should be available within 20 days in China, but the product looks very similar to another Kaiboer STB based on RK3066 and selling for 519 RMB ($84), so it’s unlikely it will […]

June 21, 2013June 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Samsung Unveils ATIV Q Android & Win8 Convertible Tablet, Galaxy NX DSLR Camera Running Android 4.2

Samsung Premiere 2013 took place yesterday in London, and the company announced 9 new products at the event. But 2 devices really stood out for me: ATIV Q – A 13.3″ tablet convertible to a notebook that runs Windows 8 and Android 4.2.2 simultaneously. Galaxy NX – a DSLR Camera running Android 4.2.2 supporting interchangeable lenses. Galaxy S4 Active was also interesting as it’s compliant with IP67, which means it’s dust proof and water resistant, so you don’t have to worry about dust / sand getting into the device, or dropping it into the water. It can stay under in 1 meter of water for 30 minutes, and even though the touchscreen won’t operate under water, you can still take underwater pictures during your snorkeling trip. Don’t expect it to work for diving though. Samsung ATIV Q (Preliminary) Specifications: Processor – Intel Core i5 (Haswell) GPU – Intel HD Graphics […]

June 20, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mele M9 Android Set-top Box Powered by AllWinner A31

After Mele A1000G Quad, Mele has just launched another model called M9, still based on AllWinner A31 quad core processor, with an external Wi-Fi antenna, but no SATA support. Mele M9 specifications: SoC – AllWinner A31 quad core Cortex A7 @ 1.5GHz + PowerVR SGX544MP2 GPU System Memory – 2GB DDR3 RAM Storage 16GB NAND Flash SD card slot Video Output – HDMI 1.4 Audio I/O – HDMI + S/PDIF optical out + Audio jack output Video Playback – Up to 2160p @ 60 Mbps USB – 3x USB 2.0 host ports, 1x mini USB 2.0 OTG port Connectivity Ethernet – 10/100Mbps Wi-Fi – 802.11 b/g/n Power Supply – 5V/2A The device runs Android 4.1 with a customized “Windows 8” user interface, and comes with a 5V/2A power adapter, an IR remote control (show below), an HDMI cable, a user’s manual, and a warranty card. The remote above as a […]

June 17, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Rockchip RK3168 Powered Tablets Are Starting to Show Up for Sale

Rockchip first showcased a tablet prototype with RK3168 dual core processor at the Hong Kong Electronics Fair in April, showing lower power consumption compared to RK3066. At the time, tablets based on this processor were still in development, but this has changed as a few RK3168 tablets are now showing up in Aliexpress. Prices for 7″ Android tablets such as Cube U25GT PRO, are now about $110 as low as $75 including shipping, but this should come down as more sellers provide the devices. Cube U25GT PRO is an updated version of the U25GT pictured above. Here are the specifications of the PRO version: SoC – Rockchip RK3168 @ 1.2 GHz with PowerVR SGX540 GPU System Memory – 512 MB RAM Storage – 8GB NAND Flash + micro SD card slot Display – 7″ 5 point touch capacitive screen (1024×600) Camera – 0.3MP front camera Connectivity – Wifi 802.11b/g/n + […]

June 17, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

iPazzPort SY-20-19VC Android STB is also a Remote Control Charging Dock

iPazzPort SY-20-19VC, aka iPazzPort Pearl, is an Android 4.1.1 set-top box powered by Rockchip RK3066 that comes bundled with with a dual sided RF remote with a QWERTY keyboard, touch pad, and voice support. That’s pretty common these days. The design however, is somewhat original, as once you’re done watching videos or playing games, you can put back the remote into an opening in the set-top box to store it and recharge it, and it may prevent you from losing the remote under the pillows, and the remote will be fully charged most of the time. Here are the specifications of this media player: SoC – Rockchip RK3066 @ 1.6GHz + Mali-400 MP4 GPU System Memory – 1GB DDR3 Storage – 4GB + micro SD card slot (up to 32GB, or is it 16GB?) Connectivity 802.11b/g/n Wi-Fi 10/100M Ethernet 3G via external USB 3G dongle Video Output – HDMI 1.4 […]

June 14, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rockchip RK3188 Based Giayee TVB103 Android TV STB Features VGA and HDMI Video Output

Although there are now many Rockchip RK3188 mini PCs, full sized quad core Android STB are not so common, especially with VGA output, and Giayee TVB103 is the only quad core media player providing both HDMI and VGA output that I know of. Here are Giayee TVB103 specifications: SoC – Rockchip RK3188 ARM Cortex A9 28nm Quad core 1.8GHz CPU + Quad-core GPU Mali400 System Memory – 1 to 2GB DDR3 RAM Storage – 8/16/32GB NAND Flash + micro SD card slot (up to 64GB) Connectivity: Built-in WiFi 802.11 a/b/g/n module supporting dual band (2.4GHz & 5GHz) 10/100 Base-T Ethernet Bluetooth 2.1 + EDR Video Output – HDMI, VGA, and AV (Note the latter can’t be seen on any pictures) Audio – L and R Output (RCA), S/PDIF, earphone jack & MIC input USB – 2x USB Host ports, and 1x Mini USB OTG port Dimensions – 155 x 90 […]