ipad News - CNX Software - Embedded Systems News

October 27, 2015October 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Foxconn Kangaroo Intel Atom x5-Z8500 mini PC Includes a Fingerprint Scanner, Sells for $99

Most Cherry Trail mini PCs launched on the market are powered by Intel Atom x5-Z8300 processor, and few have been announced with x5-Z8500 or x7-X8700 processors which are more powerful, and do not cost that much more based on Intel’s recommended customer price. Foxconn Kangaroo is one of these mini PCs with an Atom x5-Z8500, 2GB RAM, and 32GB eMMC, which has a bonus includes a fingerprint scanner, and sells for $99 on Newegg. Foxconn Kangaroo specifications: Processor – Intel Atom x5-Z8500 Processor @ 1.44 GHz (up to 2.24 GHz) with 2M Cache and Intel Gen8 Graphics System Memory – 2GB LPDDR3 Storage – 32GB eMMC + micro SD slot Video & Audio Output – HDMI Connectivity – Wi-Fi 802.11ac & Bluetooth 4.0 USB – 1x micro USB port (for charging only), 1x USB 2.0, 1x USB 3.0 Misc – Fingerprint reader, 40-pin proprietary Kangaroo adapter, power button Battery Life […]

March 31, 2015March 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Connect a 9.7″ Retina Display (iPAD 3/4) to Your Computer via a DisplayPort Adapter

One way to connect an extra Retina (2048×1536) display to your computer is to purchase Adafruit Qualia 9.7″ DisplayPort Monitor for $224.95. But in case your budget is limited, you could combine an old iPAD 3/4 display with AbuseMark 2048×1536 LCD to DisplayPort Adapter for 3,500 JPY ($29 US). If you don’t have an old iPAD, or would rather not dismantle your “old”-but-still-useful iPAD, you could purchase LG LP097QX1-SPC1/2, LG LP097QX1-SPA1/2/V, or Samsung LTL097QL01-W01 LCD panels instead for about $80 on Amazon US (LP097QX1 / LTL097QL01). If you live in Japan, AbuseMark also ships a complete kit for 12,000 JPY. Key features listed for the board: Video Input – DisplayPort Display Connector – 51-pin 0.3mm pitch FPC connector STM32F103CB 32-bit Cortex M3 MCU with native USB for firmware update and power/brightness/etc control Dual TI TPS61187 WLED drivers Power – USB or 5V-powered (separate connector) / 1.35A total current draw. Buck […]

June 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Blend Micro Arduino Board Integrates Bluetooth 4.0 Low Energy Connectivity for 25 Euros

RedBearLab’s Blend Micro is an Arduino compatible board with Bluetooth 4.0 Low Enery (aka Bluetooth Smart) connectivity, that’s part of Arduino-at-heart, a partner program initiated by the developers of Arduino boards. It has been made to help design low power Internet-Of-Things (IoT) projects quickly and easily. Blend Micro technical specifications: MCU – Atmel ATmega32u4 @ 8 MHz with 32KB flash (4KB used by bootloader), 2.5 KB SRAM, and 1KB EEPROM. Connectivity – Bluetooth 4.0 Low Energy via Nordic nRF8001 chip USB – 1x micro USB port I/Os: Serial (Tx/Rx) I2C, SPI PWM U to 16 Digital I/Os Up to 6 Analog inputs Operating Voltage – 3.3V Input Voltage – 5V (USB), and 3.3-12V (VIN) Power Consumption – 2mA (average – using Interrupt mode) Dimensions – 43.6 x 18.4 x 4.3mm Weight – 4g The specs are very similar to BLEDuino, except it’s slightly smaller. Blend Micro can communicate with BLE […]

May 7, 2014May 7, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

DLink Introduces DSP-W215 Wi-Fi Smart Plug for iOS and Android

D-Link is entering the automation market with a Wi-Fi smart plug (Model DSP-W215) that configurable via WPS, allows you to control and monitor your electrical appliance via Android 4.0+ and iOS6+ mobile devices, and it even has an overheating protection mechanism that can apparently detect if the plug or the device itself overheats. Let’s go through the technical specifications: Wi-Fi – IEEE 802.11n (According to pictures found via FCC filings, the chipset is Atheros AR1311_AL1A) Misc – Power / Status LEDs, On/Off button Dimensions – 9 x 6.10 x 3.56 cm (3.54″ x 2.40″ x 1.40″) Weight – 125 g (4.41 ounces) Power Input – 100 to 125 V AC / 5W maximum power consumption Temperature Range – Operating: 0 to 40 °C, Storage: -20 to 65 °F Humidity – Operating: 10% to 90% non-condensing, Storage: 5% to 95% non-condensing Based on these specs, since it can only work between 100 […]

April 20, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Watch and Record Live TV on Android or iOS Mobile Devices with Geniatech WiTV

If you’ve ever wanted to watch live digital TV on your tablet or smartphone, there’s now a solution. Geniatech WiTV is a tiny battery powered DVB receiver also acting as Wi-Fi access point in order to stream live TV to your mobile devices. You can use this device within your house or on the go, but it has to be within 5 to 7 meters from your tablet or smartphone to work properly. The specifications released are limited, but we still know the following: Frequency range – 177.5 – 226.5MHz (VHF); 474 – 858MHz (UHF) Digital TV standards – DVB-T Mpeg 2, Mpeg 4 and H.264; ISDBT oneseg 802.11 b/g/n WiFi Standard Support Micro USB for recharging Up to 3 hours of TV viewing (TBC) iOS devices must run IOS 5.0 or IOS5.1, and Android 3.0 or greater is supported. You’ll need to install SianoTV for Android or iOS, scan […]

June 4, 2012June 4, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Showcases OMAP 5 GPU Capabilities with GLBenchmark 2.5

In February, Texas Instruments compared the browser rendering performance of its OMAP 5 platform to the Nvidia Tegra 3, and the benchmark results showed OMAP 5 was twice as fast @ 800 MHz than the Tegra 3 @ 1.3 GHz. Today, they’ve uploaded a video showing the 3D performance a tablet based on OMAP 5 (and PowerVR SGX 544-MP GPU) against a market-leading tablet (I guess it’s the Apple iPad 3 with PowerVR SGX 543 GPU) using GLBenchmark 2.5 with the following setup: 1080p resolution. On-screen and off-screen tests were conducted to compensate for the “Vysnc Limited” scenarios. (24bpp) 16bit depth tests to better represent high-end game content Power saving mode disabled and device connected to a power source. No background tasks and airplane mode “on.” The on-screen results show 38 fps for the OMAP 5 vs 34 fps for the other platform, or a 12% performance boost. Off-screen results […]

February 2, 2012February 2, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Penandfree PT- Pen Transforms Your Laptop into A Tablet

Penandfree has unveiled the PT-pen (Presentation pen) at the 2012 ISE exhibition. The company claims this pen can transform ordinary laptops or netbooks into touch-screen tablets, replacing the need for both a mouse and keyboard. PT-Pen can be used for capturing handwritten notes, digital signatures and all sorts of creative sketches. MINT Interactive software is included with the PT-pen and provides access to a full color pallet, a variety of line thicknesses, a virtual keyboard and a handwriting recognition mode. Penandfree explains that PT-pen allows navigation in web browsers and can be used with office software such as Microsoft Excel and Powerpoint as it conforms with Microsoft tablet and standard HID specifications. Mint Interactive Software can be download for Windows XP/Visata/&, MacOS and Linux. For Android Tablet and/or iPad users, Penandfree unveiled the “Legato Smart-Pen”. The PT-pen digitally “inks” a laptop’s LCD using ultrasonic technology. A magnetized receiver sits at […]

December 9, 2011May 2, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mono for Android 4.0 (.NET Framework)

Xamarin has provided .NET support for Linux via the Mono project for a while. It has recently announced the availability of an Android 4.0 version of its Mono software in order to let .NET and C# developers use Microsoft Visual Studio to build Android applications. Mono for Android follows upon Xamarin’s MonoTouch framework for iOS (iPhone and iPad development) and consists of a plug-in for Microsoft Visual Studio, a core Mono runtime, a Software development and bindings for native Android APIs. Such software is designed to leverage existing .NET applications, libraries and tools for Android development. With Mono for Android, developers can also call upon their native skills in .NET and the C# programming language in developing Android apps. Xamarin says that Mono for Android 4.0 provides access to all the new features, native APIs and UI toolkits in Android 4.0. Mono for Android 4.0 brings those key improvements and […]