IoT News - Page 31 of 189 - CNX Software

March 13, 2024March 13, 2024 by Debashis Das - No Comments

Quectel RG255G – A MediaTek-Based 5G RedCap IoT Module Designed for Industrial & Automotive Applications

The Quectel RG255G IoT Module is a Sub-6GHz LGA module utilizing 3GPP Rel-17 RedCap (Reduced Capability) technology. The module is designed for medium-speed, large-capacity applications with features like URLLC/network slicing, and multi-constellation GNSS support, while also ensuring compatibility with LTE Cat 4 and 5G Sub-6 SA mode. With a peak data rate of 220Mbps DL/121Mbps UL and interfaces like USB 2.0 and PCIe 1.0, this device is ideal for smart grids, the internet of vehicles, and industrial automation. Quectel RG255G IoT Module Specification: Module Type – 5G Redcap Sub-6GHz LGA module Technology Used – Utilizes 3GPP Rel-17 RedCap (Reduced Capability) technology Data Rates – Maximum data rates of 220Mbps Downlink (DL) and 121Mbps Uplink (UL) 5G/4G Coverage – Worldwide coverage support with RG255G-NA and RG255G-EU 5G Capabilities – Includes 5G SA mode with URLLC/slicing features GNSS Receiver – Multi-constellation GNSS support for applications requiring accurate positioning Optional Features – DFOTA, […]

March 5, 2024March 4, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Industrial OpenWrt gateway features MediaTek MT7628 SoC, WiFi, LTE, and GNSS connectivity

Atreyo AG-702 industrial OpenWrt gateway

Atreyo AG-702 is an industrial OpenWrt gateway based on the MT7628 processor with dual Ethernet and WiFi connectivity as well as a built-in LTE and GNSS modem supporting two SIM cards. The gateway is equipped with isolated RS485 and RS232 interfaces, two digital isolated inputs, one relay output, and a USB host port that can be used to connect a flash drive or USB converters to various other interfaces. It is housed in an anodized aluminum enclosure and supports a wide 14-60V DC input range suitable for industrial settings. Atreyo AG-702 specifications: SoC – MediaTek MT7628 MIPS processor at 580MHz System Memory – 256MB Storage – 32MB eMMC flash + 512MB NAND flash with ExtRoot support (overlay) Networking 100Mbps Ethernet WAN port 100Mbps Ethernet LAN port LTE/GPRS with dual SIM, 1x external antenna 2.4 GHz WiFi with 1x external antenna GNSS with active antenna support USB – 1x USB 2.0 […]

March 5, 2024August 21, 2024 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Kaki Pi is a Raspberry Pi-inspired Renesas RZ/V2H AI SBC with four camera connectors, a PCIe 3.0 interface

Kaki Pi Renesas RZ/V2H SBC Raspberry Pi flavor

Japanese company Yuridenki-Shokai Co. Ltd will soon launch the Kaki Pi single board computer [update Aug 2024: now called Kakip] based on the just-announced Renesas RZ/V2H Arm microprocessor with a powerful 80 TOPS AI accelerator, with Raspberry Pi-inspired form factor and features such as the 40-pin GPIO header, the same PCIe 3.0 connector as found in the Raspberry Pi 5, and four 22-pin MIPI CSI connectors that look to be compatible with the Raspberry Pi cameras. The board also comes with up to 8GB LPDDR4, a microSD card for the OS, a 22-pin MIPI DSI connector for a display, a gigabit Ethernet port, two USB 3.0 ports, two CAN Bus connectors, and other interfaces that make it suitable for robotics applications such as Autonomous Mobile Robots (AMR) and HSR (Human Support Robots) as well as IoT projects. Kaki Pi specifications: SoC – Renesas RZ/V2H CPU/MCU cores Quad-core Arm Cortex-A55 processor […]

March 4, 2024March 3, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

ADLINK MXA-200 5G IIoT gateway ships with Debian or Yocto Linux

ADLINK MXA-200 is an NXP i.MX8M Plus-based 5G IIoT gateway running Debian or a Yocto-based Linux distribution with two RS-232/422/485 isolated serial ports, two gigabit Ethernet ports, two USB 3.0 port, and an operating temperature range of -20 to 70°C. The fanless gateway also features two M.2 slots for integrating Wi-Fi and/or 4G LTE or 5G modules, and ADLINK expected the MXA-200 to find its way into renewable energy applications, EV chargers, smart city and smart factory applications that require big data collection, cloud-based applications, and video related monitoring solutions. ADLINK MXA-200 specifications: SoC – NXP i.MX8M Plus CPU – Quad-core Arm Cortex-A53 processor @ 1.6/1.8GHz MCU – Arm Cortex-M7 real-time core @ 400 MHz GPU – Vivante GC520L 2D GPU, Vivante GC7000UL 3D GPU VPU – 1080p60 hardware decoder (HEVC, H.264, VP9, and VP8) and encode (H.265/H.264) AI accelerator – 2.3 TOPS NPU System Memory – 2GB or 4GB […]

February 29, 2024February 29, 2024 by Debashis Das - 2 Comments

Waveshare ESP32-H2-DEV-KIT-N4-M – A Low-cost ESP32-H2 development board going for $6.65

Waveshare ESP32 H2 DEV KIT N4 M Dev Board

The Waveshare ESP32-H2-DEV-KIT-N4-M is a development board based on the ESP32-H2, available for only $6.65 on Aliexpress, but you’ll also find it on Amazon and Waveshare’s official store. This is a significant price drop compared to last year’s official Espressif ESP32-H2-DevKitM-1 board, which was priced at $10 without including shipping costs and with a similar design. In 2021, Espressif Systems introduced the ESP32-H2 to the world. However, it wasn’t until 2023 that they released their first development board. Since then, there haven’t been many products built around this new module. Some exceptions include the Olimex ESP32-H2-DevKit-LiPo, LILYGO T-Panel, and the ESP Thread Border Router/Zigbee Gateway board, all of which feature the ESP32-H2 chip. Waveshare ESP32-H2-DEV-KIT-N4-M specifications: Wireless module – ESP32-H2-MINI-1 MCU – Espressif Systems ESP32-H2 32-bit RISC-V microcontroller at up to 96 MHz with 320 KB SRAM, 128 KB ROM, 4 KB LP memory, Bluetooth 5.2 LE/Mesh, and 802.15.4 (Zigbee/Thread/Matter) radios. […]

February 28, 2024February 27, 2024 by Debashis Das - No Comments

Inventia MT-058 cellular IoT telemetry module is powered by Nordic Semi nRF9160 SiP

MT 058 – battery powered telemetry module

A few days back, Inventia introduced the MT-058 cellular IoT telemetry module built around Nordic Semiconductor’s nRF9160 System in Package (SiP) module with support for LTE-M/NB-IoT connectivity with GNSS. The device is designed for low-power, battery-operated industrial applications such as water metering and environmental monitoring. The module is IP68-rated and offers a combination of digital and analog inputs. It also comes with a battery that can last up to 5 years and there is also support for external sensor attachment for data logging applications. MT-058 Cellular IoT telemetry module specification: Nordic nRF9160 SiP with 64 MHz Arm Cortex-M33 application processor with 1 MB flash, and 256 KB RAM Connectivity – LTE Cat M1 and NB-IoT SIM card options – Standard 2FF SIM card slot, with an option for a soldered Machine Identification Module (MIM). Antenna – SMA connector for attaching an external antenna. Inputs – 5 inputs for counters, up […]

February 27, 2024February 26, 2024 by Debashis Das - No Comments

Blues Starnote – An affordable satellite IIoT module with 18 KB of data for Skylo service

Last month, we wrote about the new Quectel CC660D-LS IoT-NTN module, built in collaboration with Quectel and Skylo. before that, we wrote about Qualcomm 212S and 9205S satellite modems which were also developed in collaboration with Skylo. Those modules support IoT NTN (Non-Terrestrial Networks) which makes them very useful for a variety of applications including sending texts, making voice calls, and providing emergency services, particularly in remote areas. But in a recent development, Skylo partnered with Blues to launch Starnote, a complete backup satellite module that just cost $49. It provides a backup satellite connection for times when cellular or Wi-Fi isn’t available, designed to work seamlessly with the Notecard API. The module features an M.2 E-Key edge connector and a six-pin JST connector (on the backside of the PCB) for easy setup, plus options for external antennas through u.FL connectors. It includes 18KB of Skylo satellite data without any […]